IEC TR 61292-9:2013

Optical amplifiers - Part 9: Semiconductor optical amplifiers (SOAs)

IEC/TR 61292-9:2013(E) which is a technical report, focuses on SOAs, especially the specific features and measurement of gain and PDG. In this report, only the amplifying application of SOAs is described. Other applications, such as modulation, switching and non-linear functions, are not covered. Potential applications of SOAs, however, such as reflective SOAs (RSOAs) for the seeded wavelength division multiplexing passive optical network (WDM-PON), are briefly reviewed in Annex A. Keywords: Semiconductor optical amplifiers (SOAs), specific features and measurement of gain, polarization dependent gain (PDG)

General Information

• Status: Published
• Publication Date: 04-Nov-2013
• ICS: 33.160.10 - Amplifiers
• ICS: 33.180.30 - Optic amplifiers
• Technical Committee: SC 86C - Fibre optic systems and active devices
• Drafting Committee: WG 3 - TC 86/SC 86C/WG 3
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 13-Dec-2017

Relations

• Revised: IEC TR 61292-9:2017 - Optical amplifiers - Part 9: Semiconductor optical amplifiers (SOAs)
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC/TR 61292-9 ®
Edition 1.0 2013-11
TECHNICAL
REPORT
colour
inside
Optical amplifiers –
Part 9: Semiconductor optical amplifiers (SOAs)

IEC/TR 61292-9:2013(E)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,

please contact the address below or your local IEC member National Committee for further information.

IEC Central Office Tel.: [phone]
3, rue de Varembé Fax: [phone]

CH-1211 Geneva 20 [e-mail]
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: [e-mail].

IEC/TR 61292-9 ®
Edition 1.0 2013-11
TECHNICAL
REPORT
colour
inside
Optical amplifiers –
Part 9: Semiconductor optical amplifiers (SOAs)

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
S
ICS 33.160.10; 33.180.30 ISBN 978-2-8322-1169-4

– 2 – TR 61292-9 © IEC:2013(E)

CONTENTS
FOREWORD . 4

INTRODUCTION . 6

1 Scope . 7

2 Terms, definitions, abbreviations and symbols . 7

2.1 Terms and definitions . 7

2.2 Abbreviations . 7

2.3 Symbols . 8

3 Specific features of SOAs . 9
3.1 SOA chips . 9
3.2 SOA modules . 11
3.3 Gain ripple . 11
3.4 Polarization dependent gain (PDG) . 13
3.4.1 General . 13
3.4.2 Polarization insensitive SOAs . 13
3.5 Noise figure (NF) . 13
3.6 Lifetime of carriers . 14
3.7 Nonlinear effects . 14
4 Measurement of SOA output power and PDG . 14
4.1 Narrow-band versus broadband light source . 14
4.2 Recommended set-up for output power and PDG measurements . 15
4.3 Examples of measurement results obtained by using the recommended
set-up . 16
Annex A (informative) Applications of SOAs . 19
A.1 General . 19
A.2 Polarization mode of SOAs . 19
A.3 Reach extender for GPON . 19
A.4 Pre-amplifier in transceivers for 100 GE . 19
A.5 Monolithic integration of SOAs . 20
A.6 Reflective SOAs (RSOAs) . 21
Bibliography . 22

Figure 1 – Schematic diagram of the typical SOA chip . 9

Figure 2 – Example of gain dependency on forward current of the SOA chip . 9
Figure 3 – Schematic top view of a typical SOA chip with and without an angled
waveguide structure . 10
Figure 4 – Schematic top view of the typical SOA module . 11
Figure 5 – Schematic diagram of the optical feedback inside the SOA chip . 12
Figure 6 – Schematic diagram of gain ripple . 12
Figure 7 – Output power and PDG dependence on the wavelength of the SOA chip . 14
Figure 8 – Recommended measurement set-up for optical power and PDG of SOA
modules . 15
Figure 9 – Recommended measurement set-up for optical power and PDG of SOA
chips . 16
Figure 10 – Optical power spectra of three different SOA chips. 16
Figure 11 – Output power and PDG of the SOA chip sample no. 1 as a function of I . 17
F
TR 61292-9 © IEC:2013(E) – 3 –

Figure 12 – Output power and PDG of the SOA chip sample no. 2 as a function of I . 17
F
Figure 13 – Output power and PDG of the SOA chip sample no. 3 as a function of I . 18

F
Figure A.1 – Schematic diagram of the receiver section of SOA-incorporated CFP

transceivers . 20

Figure A.2 – Schematic diagram of the DFB-LDs-array type wavelength tuneable LD . 20

Figure A.3 – Schematic diagram of the seeded WDM-PON system . 21

– 4 – TR 61292-9 © IEC:2013(E)

INTERNATIONAL ELECTROTECHNICAL COMMISSION

____________
OPTICAL AMPLIFIERS –
Part 9: Semiconductor optical amplifiers (SOAs)

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. However, a
technical committee may propose the publication of a technical report when it has collected

data of a different kind from that which is normally published as an International Standard, for
example "state of the art".
IEC/TR 61292-9, which is a technical report, has been prepared by subcommittee 86C: Fibre
optic systems and active devices, of IEC technical committee 86: Fibre optics.
The text of this technical report is based on the following documents:
Enquiry draft Report on voting
86C/1148/DTR 86C/1183/RVC
Full information on the voting for the approval of this technical report can be found in the
report on voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

TR 61292-9 © IEC:2013(E) – 5 –

A list of all parts in the IEC 61292 series, published under the general title Optical amplifiers,

can be found on the IEC website.

The committee has decided that the contents of this publication will remain unchanged until

the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data

related to the specific publication. At this date, the publication will be

• reconfirmed,
• withdrawn,
• replaced by a revised edition, or

• amended.
A bilingual version of this publication may be issued at a later date.

IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
– 6 – TR 61292-9 © IEC:2013(E)

INTRODUCTION
Optical amplifiers (OAs) are necessary components as booster, line and pre-amplifiers for

current optical network systems. IEC TC86/SC86C, has published many standards for OAs

and most of them are focused on optical fibre amplifiers (OFAs), which are commonly

deployed in commercial optical network systems. Recently, semiconductor optical amplifiers

(SOAs) have attracted attention for applications in gigabit passive optical network (GPON)

and 100 Gbit Ethernet (GbE) systems. This is because SOA chips are as small as laser

diodes (LDs) and only require an electrical current.

Although SOAs for the 1 310 nm or 1 550 nm bands have been extensive
...