IEC 61754-7:2008

Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7: Type MPO connector family

IEC 61754-7:2008 defines the standard interface dimensions for type MPO family of connectors. This third edition cancels and replaces the second edition published in 2004. This third edition constitutes a technical revision. Specific technical changes involve the addition of an aligned key adaptor interface definition to address all existing MPO applications. Keywords: standard interface dimensions for type MPO family of connectors

Dispositifs d'interconnexion et composants passifs à fibres optiques - Interfaces de connecteurs pour fibres optiques - Partie 7: Famille de connecteurs de type MPO

L'IEC 61754-7:2008 définit les dimensions d'interface normalisées pour la famille de connecteurs de type MPO. Cette troisième édition annule et remplace la deuxième édition parue en 2004. Cette troisième édition constitue une révision technique. Les modifications techniques spécifiques incluent l'ajout de la définition d'une interface de raccord à détrompeur aligné pour couvrir l'ensemble des applications MPO existantes. Mots clés: dimensions d'interface normalisées pour la famille de connecteurs de type MPO

General Information

• Status: Replaced
• Publication Date: 26-Mar-2008
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: SC 86B - Fibre optic interconnecting devices and passive components
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 13-Dec-2017

Relations

• Replaced By: IEC 61754-7-2:2017 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-2: Type MPO connector family - Two fibre rows
• Effective Date: 05-Sep-2023
• Replaced By: IEC 61754-7-1:2014 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-1: Type MPO connector family - One fibre row
• Effective Date: 05-Sep-2023
• Revises: IEC 61754-7:2004 - Fibre optic connector interfaces - Part 7: Type MPO connector family
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 61754-7
Edition 3.0 2008-03
INTERNATIONAL
STANDARD
Fibre optic interconnecting devices and passive components – Fibre optic
connector interfaces –
Part 7: Type MPO connector family

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,

please contact the address below or your local IEC member National Committee for further information.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
IEC 61754-7
Edition 3.0 2008-03
INTERNATIONAL
STANDARD
Fibre optic interconnecting devices and passive components – Fibre optic
connector interfaces –
Part 7: Type MPO connector family

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
U
ICS 33.180.20 ISBN 2-8318-9667-3

– 2 – 61754-7 © IEC:2008(E)
CONTENTS
FOREWORD.3

1 Scope.5

2 Description .5

3 Interfaces .5

Figure 1 – MPO connector configurations .6

Figure 2 – MPO female plug connector angled interface .7

Figure 3 – Optical datum target location diagrams .9
Figure 4 – Gauge pin.11
Figure 5 – Gauge for plug.12
Figure 6 – MPO male plug connector angled interface .13
Figure 7 – MPO adaptor interface.15
Figure 8 – MPO female plug connector flat interface.17
Figure 9 – MPO male plug connector flat interface.19
Figure 10 – MPO backplane housing interface .21
Figure 11 – MPO printed board housing interface .22
Figure 12 – MPO aligned key adaptor interface.27

Table 1 – Dimensions of the MPO female plug connector angled interface.8
Table 2 – Dimensions of the gauge pin.11
Table 3 – Dimensions of the gauge for plug.12
Table 4 – Dimensions of the MPO male plug connector angled interface.14
Table 5 – Dimensions of the MPO adaptor interface .16
Table 6 – Dimensions of the MPO female plug connector flat interface .18
Table 7 – Dimensions of the MPO male plug connector flat interface .20
Table 8 – Dimensions of the MPO backplane housing.23
Table 9 – Grade .24
Table 10 – Dimensions of the MPO printed board housing interface.26
Table 11 – Dimensions of the MPO aligned key adaptor interface .28

61754-7 © IEC:2008(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION

___________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –

FIBRE OPTIC CONNECTOR INTERFACES –

Part 7: Type MPO connector family

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
The International Electrotechnical Commission (IEC) draws attention to the fact that it is claimed that compliance
with this document may involve the use of a patent concerning MPO connectors.

The IEC takes no position concerning the evidence, validity and scope of this patent right.
The holder of this patent right has assured the IEC that he/she is willing to negotiate licences under reasonable and
non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the
holder of this patent right is registered with the IEC. Information may be obtained from:
Intellectual Property Department,
Nippon Telegraph and Telephone Corporation,
20-2 Nishi-shinjuku 3-Chome Shinjukuku,
Tokyo 163-14, Japan.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights
other than those identified above. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61754-7 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.

– 4 – 61754-7 © IEC:2008(E)
This third edition cancels and replaces the second edition published in 2004. This third edition
constitutes a technical revision.

Specific technical changes involve the addition of an aligned key adaptor interface definition to
address all existing MPO applications.

The text of this standard is based on the following documents:

CDV Report on voting
86/2581/CDV 86/2672/RVC
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all the parts in the IEC 61754 series, under the general title Fibre optic interconnecting
devices and passive components – fibre optic connector interfaces, can be found on the IEC
website.
The committee has decided that the contents of this publication will remain unchanged until the
maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

___________
This new extended title will be applied to other parts of IEC 61754 as and when they are re-issued.

61754-7 © IEC:2008(E) – 5 –
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –

FIBRE OPTIC CONNECTOR INTERFACES –

Part 7: Type MPO connector family

1 Scope
This part of IEC 61754 defines the standard interface dimensions for type MPO family of
connectors.
2 Description
The parent connector for type MPO connector family is a multiway plug connector charac-
terized by a rectangular ferrule normally 6,4 mm × 2,5 mm which utilizes two pins of 0,7 mm
diameter as its alignment. It is applicable to a joint of multiple fibres up to 12 fibres by arraying
them between two pin-positioning holes in the ferrule. Furthermore, it is capable of joining up to
24 fibres by arraying them with a two layer arrangement. The connector includes a push-pull
coupling mechanism and a ferrule spring loaded in the direction of the optical axis. The
connector has a single male key which may be used to orient and limit the relative position
between the connector and the component to which it is mated.
Connector interfaces are configured using a female plug without pins, a male plug with pins
fixed and an adaptor as shown in Figure 1. The female plug is intermateable with the male plug.
Moreover, connector interfaces between the female plug and the male plug are configured by
applying a backplane housing and a printed board housing instead of the adaptor.
3 Interfaces
This standard contains the following standard interfaces:
Interface 7-1: MPO female plug connector angled interface – Push/pull consisting of:
Interface 7-1-1 for 2 to 12 fibres
Interface 7-1-2 for 16 to 24 fibres

Interface 7-2: MPO male plug connector angled interface – Push/pull consisting of:
Interface 7-2-1 for 2 to 12 fibres
Interface 7-2-2 for 16 to 24 fibres
Interface 7-3: MPO adaptor interface – Push/pull
Interface 7-4: MPO female plug connector flat interface – Push/pull consisting of:
Interface 7-4-1 for 2 to 12 fibres
Interface 7-4-2 for 16 to 24 fibres
Interface 7-5: MPO male plug connector flat interface – Push/pull consisting of:
Interface 7-5-1 for 2 to 12 fibres
Interface 7-5-2 for 16 to 24 fibres
Interface 7-6: MPO backplane housing interface – Self-retaining
Interface 7-7: MPO printed board housing interface – Self-retaining

– 6 – 61754-7 © IEC:2008(E)
Interface 7-8: MPO adaptor interface – Push/pull, aligned key configuration

The following standards are intermateable:

Female plugs Adaptors/housings Male plugs

7-1-1 7-3 7-2-1
7-1-2 7-3 7-2-2
7-4-1 7-3 and 7-8 7-5-1
7-4-2 7-3 and 7-8 7-5-2
7-1-1 7-6 and 7-7 7-2-1
7-1-2 7-6 and 7-7 7-2-2
7-4-1 7-6 and 7-7 7-5-1
7-4-2 7-6 and 7-7 7-5-2
NOTE Connector interfa
...

IEC 61754-7 ®
Edition 3.0 2008-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Fibre optic
connector interfaces –
Part 7: Type MPO connector family

Dispositifs d’interconnexion et composants passifs à fibres optiques –
Interfaces de connecteurs pour fibres optiques –
Partie 7: Famille de connecteurs de type MPO

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from

either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or

your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie

et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des

questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez

les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: [phone]
3, rue de Varembé Fax: [phone]
CH-1211 Geneva 20 [e-mail]
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 14
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 55 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: [e-mail].
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient plus de 30 000 termes et définitions en
Spécifications techniques, Rapports techniques et autres
anglais et en français, ainsi que les termes équivalents dans
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
14 langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.

Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
La recherche avancée permet de trouver des publications IEC Plus de 55 000 entrées terminologiques électrotechniques, en
en utilisant différents critères (numéro de référence, texte, anglais et en français, extraites des articles Termes et
comité d’études,…). Elle donne aussi des informations sur les Définitions des publications IEC parues depuis 2002. Plus
projets et les publications remplacées ou retirées. certaines entrées antérieures extraites des publications des

CE 37, 77, 86 et CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished

Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
[e-mail].
IEC 61754-7 ®
Edition 3.0 2008-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Fibre optic

connector interfaces –
Part 7: Type MPO connector family

Dispositifs d’interconnexion et composants passifs à fibres optiques –

Interfaces de connecteurs pour fibres optiques –

Partie 7: Famille de connecteurs de type MPO

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX U
ICS 33.180.20 ISBN 978-2-8322-1462-6

– 2 – IEC 61754-7:2008 © IEC 2008

CONTENTS
FOREWORD . 3

1 Scope . 5

2 Description . 5

3 Interfaces . 5

Figure 1 – MPO connector configurations . 6

Figure 2 – MPO female plug connector angled interface . 7

Figure 4 – Gauge pin . 11
Figure 5 – Gauge for plug . 12
Figure 6 – MPO male plug connector angled interface . 13
Figure 7 – MPO adaptor interface . 15
Figure 8 – MPO female plug connector flat interface . 17
Figure 9 – MPO male plug connector flat interface . 19
Figure 10 – MPO backplane housing interface (1 of 2) . 21
Figure 11 – MPO printed board housing interface (1 of 2) . 24
Figure 12 – MPO aligned key adaptor interface . 27

Table 1 – Dimensions of the MPO female plug connector angled interface . 8
Table 2 – Dimensions of the gauge pin . 11
Table 3 – Dimensions of the gauge for plug . 12
Table 4 – Dimensions of the MPO male plug connector angled interface . 14
Table 5 – Dimensions of the MPO adaptor interface . 16
Table 6 – Dimensions of the MPO female plug connector flat interface . 18
Table 7 – Dimensions of the MPO male plug connector flat interface . 20
Table 8 – Dimensions of the MPO backplane housing . 23
Table 9 – Grade . 24
Table 10 – Dimensions of the MPO printed board housing interface . 26
Table 11 – Dimensions of the MPO aligned key adaptor interface . 28

INTERNATIONAL ELECTROTECHNICAL COMMISSION

___________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –

FIBRE OPTIC CONNECTOR INTERFACES –

Part 7: Type MPO connector family

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
The International Electrotechnical Commission (IEC) draws attention to the fact that it is claimed that compliance
with this document may involve the use of a patent concerning MPO connectors.

The IEC takes no position concerning the evidence, validity and scope of this patent right.
The holder of this patent right has assured the IEC that he/she is willing to negotiate licences under reasonable and
non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the
holder of this patent right is registered with the IEC. Information may be obtained from:
Intellectual Property Department,
Nippon Telegraph and Telephone Corporation,
20-2 Nishi-shinjuku 3-Chome Shinjukuku,
Tokyo 163-14, Japan.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights
other than those identified above. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61754-7 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.

– 4 – IEC 61754-7:2008 © IEC 2008

This third edition cancels and replaces the second edition published in 2004. This third edition
constitutes a technical revision. Specific technical changes involve the addition of an aligned
...