iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 62841-2-4:2014/COR1:2015

(Corrigendum)

Corrigendum 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type

Corrigendum 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type

Corrigendum 1 - Outils électroportatifs à moteur, outils portables et machine pour jardins et pelouses - Sécurité - Partie 2-4: Exigences particulières pour les ponceuses et lustreuses portatives, autres que du type à disque

General Information

Status
Published
Publication Date
27-Oct-2015
ICS
25.140.20 - Electric tools
Technical Committee
TC 116 - Safety of motor-operated electric tools
Current Stage
PPUB - Publication issued
Start Date
01-Nov-2015
Completion Date
28-Oct-2015
Ref Project

Relations

Corrects
IEC 62841-2-4:2014 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type
Effective Date
05-Sep-2023

Buy Standard

IEC 62841-2-4:2014/COR1:2015 - Corrigendum 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type Released:10/28/2015IEC 62841-2-4:2014/COR1:2015 - Corrigendum 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type Released:10/28/2015
PreviousNext
Standard
IEC 62841-2-4:2014/COR1:2015 - Corrigendum 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type Released:10/28/2015
English and French language
10 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


 IEC 2015
INTERNATIONAL ELECTROTECHNICAL COMMISSION
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
IEC 62841-2-4 IEC 62841-2-4
Edition 1.0  2014-06 Edition 1.0  2014-06

ELECTRIC MOTOR-OPERATED HAND-HELD OUTILS ELECTROPORTATIFS A MOTEUR,
TOOLS, TRANSPORTABLE TOOLS AND LAWN OUTILS PORTABLES ET MACHINES POUR
AND GARDEN MACHINERY – SAFETY – JARDINS ET PELOUSES – SECURITE –
Part 2-4: Particular requirements for hand-held Partie 2-4: Exigences particulières pour les
sanders and polishers other than disc type ponceuses et lustreuses portatives, autres que
du type à disque
CO RRI G E NDUM 1
Corrections to the French version appear after the English text.
Les corrections à la version française sont données après le texte anglais.

18 Abnormal operation
Replace Table 4 with the following:
Table 4 – Required performance levels
Type and purpose of SCF Minimum Performance
Level (PL)
Power switch – prevent unwanted switch-on for belt b
sanders, drum sanders and polishers
Power switch – prevent unwanted switch-on for random a
orbit sanders and polishers
Power switch – prevent unwanted switch-on for other Not an SCF
sanders and polishers
Power switch – provide desired switch-off for belt sanders, b
drum sanders and polishers and random orbit sanders
and polishers
Power switch – provide desired switch-off for other sanders Not an SCF
and polishers
Provide desired direction of rotation f
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 62841-3-11:2024(Main)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-11: Particular requirements for transportable combined mitre and bench saws

IEC 62841-3-11:2024 applies to transportable combined mitre and bench saws intended to be used with a toothed saw blade for cutting wood and analogous materials, plastics and nonferrous metals except magnesium with a saw blade diameter not exceeding 315 mm, which hereinafter is simply referred to as saw or tool.
This document does not apply to:
- saws intended to cut other metals, such as magnesium, steel and iron, or food;
- saws with an automatic feeding device;
- saws designed for use with abrasive wheels;
- saws designed for use with dado blades;
- single function bench or table saws;
- single function mitre saws;
- combined mitre and bench saws other than transportable.
NOTE 101 Transportable saws intended to cut ferrous metals will be covered by a future part of IEC 62841-3.
NOTE 102 Transportable tools designed for use with abrasive wheels are covered by IEC 62841-3-10:2015.
NOTE 103 Transportable table saws are covered by IEC 62841-3-1:2014.
NOTE 104 Transportable mitre saws are covered by IEC 62841-3-9:2020.
NOTE 105 In Europe (EN IEC 62841-3-11), the following additional NOTE applies:
NOTE Z101 Combined mitre and bench saws other than transportable are covered by EN 1870-3:2014.
This document is to be used in conjunction with IEC 62841-1:2014. This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for transportable combined mitre and bench saws.

  • Standard
    321 pages
    English language
    sale 15% off
  • Standard
    115 pages
    English and French language
    sale 15% off
IEC
IEC 62841-3-15:2024(Main)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-15: Particular requirements for transportable magnetic drills

IEC 62841-3-15:2024 is to be used in conjunction with the first edition of IEC 62841-1 (2014).
This document supplements or modifies the corresponding clauses in IEC 62841-1:2014, so as to convert it into the IEC Standard: Particular requirements for transportable magnetic drills.
Where a particular subclause of IEC 62841-1:2014 is not mentioned in this Part 3-15, that subclause applies as far as relevant. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 62841-1:2014 is to be adapted accordingly.
IEC 62841-1:2014, Clause 1 is applicable, except as follows.
Addition: This document applies to transportable magnetic drills which can include a liquid system.

  • Standard
    223 pages
    English language
    sale 15% off
  • Standard
    52 pages
    English and French language
    sale 15% off
IEC
IEC 62841-2-19:2024(Main)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-19: Particular requirements for hand-held jointers

IEC 62841-2-19:2024 is to be used in conjunction with IEC 62841-1:2014. This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for hand-held jointers. IEC 62841-1:2014, Clause 1 is applicable, except as follows: This document applies to hand-held jointers for cutting into wood or materials with similar physical characteristics such as, for example, chipboard, fibreboard and plywood.

  • Standard
    210 pages
    English language
    sale 15% off
  • Standard
    38 pages
    English and French language
    sale 15% off
IEC
IEC 62841-2-16:2024(Main)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-16: Particular requirements for hand-held fastener driving tools

IEC 62841-2-16:2024 is to be used in conjunction with IEC 62841-1:2014. This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for hand-held fastener driving tools. Where a particular subclause of IEC 62841-1 is not mentioned in this document, that subclause applies as far as reasonable. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 62841-1 is to be adapted accordingly.
IEC 62841-1:2014, Clause 1 is applicable, except as follows:
Addition: This document applies to hand-held fastener driving tools
- intended for driving fasteners into or through concrete, fabric, fiberboard, metal, plastic, wood, wood products, cartons, and other materials; and
- whose energy to drive the fastener is derived directly or indirectly from an electric motor or magnetic drive.
This document does not apply to pneumatically driven tools where the compressed gas comes from an external source, such as a compressor or a tank.
This document does not apply to tools powered by combustible gases, even if electrically ignited.
NOTE 101 Tools powered by compressed air or combustible gases are covered by ISO 11148-13:2017.

  • Standard
    249 pages
    English language
    sale 15% off
  • Standard
    73 pages
    English and French language
    sale 15% off
IEC
IEC 62841-2-20:2024(Main)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-20: Particular requirements for hand-held band saws

IEC 62841-2-20:2024 is to be used in conjunction with IEC 62841-1:2014. This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for hand-held band saws. Where a particular subclause of IEC 62841-1 is not mentioned in this document, that subclause applies as far as reasonable. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 62841-1 is to be adapted accordingly.
IEC 62841-1:2014, Clause 1 is applicable, except as follows:
This document applies to hand-held band saws.

  • Standard
    204 pages
    English language
    sale 15% off
  • Standard
    33 pages
    English and French language
    sale 15% off
IEC
IEC 62841-2-23:2024(Main)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-23: Particular requirements for hand-held die grinders and small rotary tools

IEC 62841-2-23:2024 is to be used in conjunction with IEC 62841-1:2014. This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for hand-held die grinders and small rotary tools. IEC 62841-1:2014, Clause 1 is applicable, except as follows:
This document applies to hand-held die grinders and to small rotary tools for mounted accessories not exceeding 55 mm in diameter and for mounted sanding accessories not exceeding 80 mm in diameter such as:
- threaded cones and plugs that are threaded on a mandrel with an unrelieved shoulder flange,
- mandrel mounted wheels, and
- rotary files
with a rated speed not exceeding a peripheral speed of the accessory of 80 m/s at rated capacity.
This document does not apply to straight and vertical grinders utilizing flanges for driving an abrasive accessory.
NOTE 101 Straight and vertical grinders are covered by IEC 62841-2-3.

  • Standard
    233 pages
    English language
    sale 15% off
  • Standard
    54 pages
    English and French language
    sale 15% off
IEC
IEC 62841-3-3:2024(Main)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-3: Particular requirements for transportable planers and thicknessers

IEC 62841-3-3:2024 is to be used in conjunction with IEC 62841-1:2014. This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for transportable planers and thicknessers.
IEC 62841-1:2014, Clause 1 is applicable, except as follows:
This document applies to transportable planers, thicknessers and combined planers and thicknessers intended for cutting wood and analogous materials with a maximum planing width of 330 mm.
This document does not apply to planers, thicknessers or combined planers and thicknessers other than transportable.
NOTE 101 ISO 19085-7:2019 gives requirements for planers, thicknessers or combined planers and thicknessers other than transportable.

  • Standard
    258 pages
    English language
    sale 15% off
  • Standard
    73 pages
    English and French language
    sale 15% off
IEC
IEC 62841-2-18:2024(Main)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-18: Particular requirements for hand-held strapping tools

IEC 62841-2-18:2024 is to be used in conjunction with IEC 62841-1:2014. This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for hand-held strapping tools. Where a particular subclause of IEC 62841-1 is not mentioned in this document, that subclause applies as far as reasonable. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 62841-1 is to be adapted accordingly. This document applies to hand-held strapping tools.

  • Standard
    197 pages
    English language
    sale 15% off
  • Standard
    29 pages
    English and French language
    sale 15% off
IEC
IEC 63241-2-1:2024(Main)
Electric motor-operated tools - Dust measurement procedure - Part 2-1: Particular requirements for hand-held core drills

IEC 63241-2-1:2024 supplements or modifies the corresponding clauses in IEC 63241-1, so as to convert it into the IEC Standard: Electric motor-operated tools - Dust measurement procedure - Particular requirements for hand-held core drills.
Where a particular subclause of IEC 63241-1:2023 is not mentioned in this Part 2-1, that subclause applies as far as relevant. Where this standard states "addition", "modification" or "replacement", the relevant text in Part 1 is to be adapted accordingly.

  • Standard
    13 pages
    English and French language
    sale 15% off
IEC
IEC 62841-2-7:2024(Main)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-7: Particular requirements for hand-held spray guns

IEC 62841-2-7:2024 deals with the safety of electric motor-operated hand-held spray guns for non-flammable materials. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3. This Part 2-7 is to be used in conjunction with the first edition of IEC 62841-1:2014. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication.

  • Standard
    206 pages
    English language
    sale 15% off
  • Standard
    37 pages
    English and French language
    sale 15% off