iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 62024-1:2017

(Main)

High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor

High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor

IEC 62024-1:2017 specifies electrical characteristics and measuring methods for the nanohenry range chip inductor that is normally used in high frequency (over 100 kHz) range.
This third edition cancels and replaces the second edition published in 2008. This edition constitutes a technical revision.This edition includes the following significant technical changes with respect to the previous edition:
a) addition of voltage-drop method of DC resistance measuring;
b) unification of technical terms.

Composants inductifs à haute fréquence - Caractéristiques électriques et méthodes de mesure - Partie 1 : Inductance pastille de l'ordre du nanohenry

L'IEC 62024-1:2017 spécifie les caractéristiques électriques et les méthodes de mesure pour l'inductance pastille de l'ordre du nanohenry qui est normalement utilisée dans la plage des hautes fréquences (supérieures à 100 kHz).
Cette troisième édition annule et remplace la deuxième édition parue en 2008. Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:  
ajout de la méthode de chute de tension pour le mesurage de la résistance en courant continu;
harmonisation des termes techniques.

General Information

Status
Published
Publication Date
12-Dec-2017
ICS
01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
29.100.10 - Magnetic components
Technical Committee
TC 51 - Magnetic components, ferrite and magnetic powder materials
Drafting Committee
WG 9 - TC 51/WG 9
Current Stage
PPUB - Publication issued
Start Date
05-Jan-2018
Completion Date
13-Dec-2017
Ref Project

Buy Standard

IEC 62024-1:2017 - High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductorIEC 62024-1:2017 - High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor
PreviousNext
Standard
IEC 62024-1:2017 - High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor
English language
19 pages
sale 15% off
Preview
sale 15% off
Preview
IEC 62024-1:2017 - High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductorIEC 62024-1:2017 - High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor
PreviousNext
Standard
IEC 62024-1:2017 - High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor
English and French language
38 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC 62024-1
®

Edition 3.0 2017-12
INTERNATIONAL
STANDARD



High frequency inductive components – Electrical characteristics and measuring
methods –
Part 1: Nanohenry range chip inductor

IEC 62024-1:2017-12(en)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2017 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.


IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and

CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.

---------------------- Page: 2 ----------------------
IEC 62024-1

®


Edition 3.0 2017-12




INTERNATIONAL



STANDARD



















High frequency inductive components – Electrical characteristics and measuring

methods –

Part 1: Nanohenry range chip inductor


























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 29.100.10 ISBN 978-2-8322-5167-6



  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 3 ----------------------
– 2 – IEC 62024-1:2017 © IEC 2017
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Inductance, Q-factor and impedance . 6
4.1 Inductance . 6
4.1.1 Measuring method . 6
4.1.2 Measuring circuit . 6
4.1.3 Mounting the inductor for the test . 7
4.1.4 Measuring method and calculation formula . 8
4.1.5 Not
...

IEC 62024-1
®

Edition 3.0 2017-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


High frequency inductive components – Electrical characteristics and measuring
methods –
Part 1: Nanohenry range chip inductor

Composants inductifs à haute fréquence – Caractéristiques électriques et
méthodes de mesure –
Partie 1: Inductance pastille de l'ordre du nanohenry

IEC 62024-1:2017-12(en-fr)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2017 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.


Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et
les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.

Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 19 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: sales@iec.ch.


A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - Découvrez notre puissant moteur de recherche et consultez
webstore.iec.ch/advsearchform gratuitement tous les aperçus des publications. Avec un
La recherche avancée permet de trouver des publications IEC abonnement, vous aurez toujours accès à un contenu à jour
en utilisant différents critères (numéro de référence, texte, adapté à vos besoins.
comité d’études, …). Elle donne aussi des informations sur les
projets et les publications remplacées ou retirées. Electropedia - www.electropedia.org

Le premier dictionnaire d'électrotechnologie en ligne au monde,
IEC Just Published - webstore.iec.ch/justpublished
avec plus de 22 300 articles terminologiques en anglais et en
Restez informé sur les nouvelles publications IEC. Just
français, ainsi que les termes équivalents dans 19 langues
Published détaille les nouvelles publications parues.
additionnelles. Egalement appelé Vocabulaire
Disponible en ligne et une fois par mois par email.
Electrotechnique International (IEV) en ligne.


Service Clients - webstore.iec.ch/csc
Si vous désirez nous
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 63182-2:2020(Main)
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 2: Ring-cores

IEC 63182-2:2020 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of ring-cores (also called toroids) made of magnetic powder, the effective parameter values to be used in calculations involving them, and gives guidelines on allowable limits of surface irregularities applicable to coated ring-cores.
The selection of core sizes for this document is based on the philosophy of including those sizes which are industrial standards, meaning that they are in broad-based use within the industry. This document is considered as a sectional specification useful in the negotiations between magnetic powder core manufacturers and users about surface irregularities.

  • Standard
    21 pages
    English and French language
    sale 15% off
IEC
IEC 61007:2020(Main)
Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures

IEC 61007:2020 describes a number of tests for use in determining the significant parameters and performance characteristics of transformers and inductors for use in electronics and telecommunication equipment. These test methods are designed primarily for transformers and inductors used in all types of electronics applications that can be involved in any specification for such components. Even though these tests can be useful to the other types of transformers used in power distribution applications in utilities, industry, and others, the tests discussed in this document can supplement or complement the tests but are not intended to replace the tests in standards for transformers. Some of the tests described are intended for qualifying a product for a specific application, while others are test practices used for manufacturing and customer acceptance testing. The test methods described here include those parameters most commonly used in the electronics transformer and inductor industry: electric strength, resistance, power loss, inductance, impedance, balance, transformation ratio and many others used less frequently.
This edition includes the following significant technical changes with respect to the previous edition:
a) scope: the application of the scope of IEC 61007 was extended;
b) Clause 2: added new references and updated the references;
c) Clause 3: new definitions were added in 3.3, and in 3.7 the voltage-time product was redefined;
d) test procedures were updated;
e) environmental test procedures: new references were added;
f) Annexes A to G were added.
The contents of the corrigendum of June 2021 have been included in this copy.

  • Standard
    186 pages
    English and French language
    sale 15% off
IEC
IEC 63182-1:2020(Main)
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification

IEC 63182-1:2020 specifies the dimensions of magnetic powder cores. This document also gives guidelines on the allowable limits of surface irregularities of magnetic powder cores. It is considered as a general specification useful in the dialogue between magnetic powder core manufacturers and users about surface irregularities.
It is intended that this document will include magnetic powder cores which are widely used and referenced in industry, either because they are included in national standards, or because they are seen to have broad-based use in industry. Where applicable, it is intended that the existing industrial name for each powder core will appear with the part within the IEC 63182 series.

  • Standard
    13 pages
    English language
    sale 15% off
  • Standard
    26 pages
    English and French language
    sale 15% off
IEC
IEC 61631:2020(Main)
Test method for the mechanical strength of cores made of magnetic oxides

IEC 61631:2020 is available as IEC 61631:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61631:2020 specifies a test method for the mechanical strength of cores made of magnetic oxides. This test method is suitable for most of the E-cores, ETD-cores, I-cores and ring-cores but other core types such as U-cores could be tested according to a derived method agreed by the parties concerned. This document is also applicable to the mechanical strength measurement of magnetic powder cores. This edition includes the following significant technical changes with respect to the previous edition:
- the phrase: "This document is also applicable to the mechanical strength measurement of magnetic powder cores" has been added in the scope;
- IEC 61246 has been replaced by IEC 63093-8; EN 1002-2 has been replaced by ISO 7500-1; ISO 4677-1 and ISO 4677-2 have been withdrawn;
- dimensions D and F in Figure A.1 and Table A.1 have been changed to be consistent with Figure 1 of IEC 63093-8:2018;
- addition of the content of ring-cores test;
- addition of Annex B;
- the location of the jig is amended in Figure 3;
- in Figure 5, the roller bars are moved to the edge of the I-core, aligned with the core.

  • Standard
    16 pages
    English language
    sale 15% off
  • Standard
    32 pages
    English and French language
    sale 15% off
IEC
IEC 63093-1:2020(Main)
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification

IEC 63093-1:2020 specifies the dimensions and allowable limits of surface irregularities of ferrite cores.
It is intended that this document excludes ferrite cores which are specialty cores with limited use. Also, special cores which are only marginal variations upon standard cores are excluded.
IEC publishes electrical standards for families of ferrite cores, as well as this series of dimensional standards for families of ferrite cores. Modifications to the ferrite cores listed in one type of standard are reflected in the other type.
This document is considered as a general specification useful in the dialogue between ferrite core suppliers and users about surface irregularities.
This first edition cancels and replaces the second edition of IEC 60424-1 published in 2015 and the first edition of IEC 62317-1 published in 2007. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous editions of IEC 60424-1 and IEC 62317-1:
a) this document integrates IEC 60424-1 and IEC 62317-1.

  • Standard
    28 pages
    English and French language
    sale 15% off
IEC
IEC 63093-9:2020(Main)
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 9: Planar cores

IEC 63093-9:2020 specifies the shapes and dimensions of ferrite cores for inductive components (transformers and chokes), whose the coil is typically made of multi-layer boards (or the coil is part of the motherboard), and the effective parameter values used in calculations. This document gives guidelines on allowable limits of surface irregularities applicable to planar-cores as well.
This document is considered as a sectional specification useful in the negotiation between ferrite core suppliers and users about surface irregularities.
This first edition cancels and replaces the first edition of IEC 60424-5 published in 2009 and first edition of IEC 62317-9 published in 2006 and its Amendment 1:2007. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous editions of IEC 60424-5 and IEC 62317-9:
a) IEC 63093-9 integrates IEC 60424-5 and IEC 62317-9;
b) Table 1, Table 2 and Table 3 in IEC 60424-5:2009 have been moved to Annex B;
c) some numbers are corrected in Table 4;
d) Table 6 is amended following IEC 60205.

  • Standard
    61 pages
    English and French language
    sale 15% off
IEC
IEC 60401-1:2020(Main)
Terms and nomenclature for cores made of magnetically soft ferrites - Part 1: Terms used for physical irregularities and reference of dimensions

IEC 60401-1:2020 is available as IEC 60401-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60401-1:2020 provides a nomenclature of the most frequent surface, bulk and shape irregularities relevant to cores made of soft ferrites (magnetic oxides). Most irregularities are graphically exemplified as visual aids. A general recommendation is also given in Annex A for a consistent scheme for specifying the exact location of the irregularity, combining a general name for the location with more detailed qualifiers of the specified location. This document can also be useful as a terminology reference when preparing technical documentation, irregularity inspection specifications, etc. This document also presents a method for defining the designation nomenclature for the major physical attributes of soft ferrite core shapes. The purpose of this document is to facilitate uniform usage of dimensional characters by manufacturers, specifiers, and users when describing core dimensions on drawings, in tables, and on catalogue specification sheets. This second edition cancels and replaces the first edition of IEC 60401-1 published in 2002 and the second edition of IEC 60401-2 published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous editions of IEC 60401-1 and IEC 60401-2:
- added the surface irregularity term “pores” in 4.3.1.6;
- added the surface irregularity term “scratch” in 4.3.6.3;
- removed the surface irregularity term “crater” in 4.1.5 of IEC 60401-1: 2002;
- removed the bulk irregularity terms “superpores” in 5.1, “inclusions” in 5.2, “internal stratification” in 5.3 and “internal crack” in 5.4 of IEC 60401-1: 2002;
- removed the contents related to “yoke ring cores” in 7.1.3 and 7.4 of IEC 60401-1:2002;
- replaced the surface irregularity term “stratification” with “lamination” in 4.3.4.7;
- replaced the location related terms “upper surface of back” with “bottom surface” and “lower surface of back” with “back surface” in Figure A.1;
- changed Clause 7 of IEC 60401-1:2002 into Annex A.

  • Standard
    28 pages
    English language
    sale 15% off
  • Standard
    58 pages
    English and French language
    sale 15% off
IEC
IEC 62024-2:2020(Main)
High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC-to-DC converters

IEC 62024-2:2020 is available as IEC 62024-2:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62024-2:2020 specifies the measuring methods of the rated direct current limits for small inductors. Standardized measuring methods for the determination of ratings enable users to accurately compare the current ratings given in various manufacturers’ data books. This document is applicable to leaded and surface mount inductors with dimensions according to IEC 62025-1 and generally with rated current less than 22 A, although inductors with rated current greater than 22 A are available that fall within the dimension restrictions of this document (no larger than a 12 mm x 12 mm footprint approximately). These inductors are typically used in DC-to-DC converters built on PCBs, for electric and telecommunication equipment, and small size switching power supply units. The measuring methods are defined by the saturation and temperature rise limitations induced solely by direct current. This edition includes the following significant technical changes with respect to the previous edition:
- addition of Table 2 and Figure 2 b).

  • Standard
    36 pages
    English and French language
    sale 15% off
IEC
IEC 63093-3:2020(Main)
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 3: Half pot-cores made of ferrite for inductive proximity switches

IEC 63093-3:2020 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of half pot-cores made of ferrite, intended to be used in inductive proximity switches. Half pot-cores for inductive proximity switches are also called PS-cores.
The selection of core sizes and shapes for this document is based on the philosophy of including those sizes and shapes which are industrial standards, either by inclusion in a national standard, or by broad-based use in industry.
This part of IEC 63093 can also be considered as a sectional specification useful in the negotiations between ferrite core manufacturers and customers about surface irregularities. It provides guidelines on the allowable limits of surface irregularities applicable to PS-cores in accordance with the relevant generic specification.
This first edition cancels and replaces the first edition of IEC 62323, published in 2005. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition of IEC 62323:
a) addition of the limits surface irregularities.

  • Standard
    28 pages
    English and French language
    sale 15% off
IEC
IEC 63093-2:2020(Main)
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 2: Pot-cores for use in telecommunications, power supply, and filter applications

IEC 63093-2:2020 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of pot-cores made of ferrite, and the dimensional limits for coil formers to be used with them, as well as the effective parameter values to be used in calculations involving them. It also gives guidelines on the allowable limits of surface irregularities applicable to pot-cores in accordance with the relevant generic specification.
The selection of core sizes and shapes for this document is based on the philosophy of including those sizes which are industrial standards, either by inclusion in a national standard, or by broad-based use in industry. See IEC 62317-1 for more detail concerning the philosophy of selecting core sizes to be included.
The general considerations upon which the design of this range of cores is based are given in Annex A.
This first edition cancels and replaces the first edition of IEC 62317-2 published in 2010. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition of IEC 62317-2:
a) addition of the limits of surface irregularities;
b) Table 4 and Table 5 are updated in accordance with IEC 60205:2016.

  • Standard
    42 pages
    English and French language
    sale 15% off