Thermal-links - Requirements and application guide

Applies to thermal-links, intended for incorporation in electrical appliances, electronic equipment and component parts thereof, normally intended for use indoors, in order to protect them against excessive temperatures under abnormal conditions. May be applicable to thermal-links for use under other than indoor conditions, provided that the climatic and other circumstances in the immediate surroundings of such thermal-links are comparable with those in this standard.

Protecteurs thermiques - Prescriptions et guide d'application

Applies to thermal-links, intended for incorporation in electrical appliances, electronic equipment and component parts thereof, normally intended for use indoors, in order to protect them against excessive temperatures under abnormal conditions. May be applicable to thermal-links for use under other than indoor conditions, provided that the climatic and other circum- stances in the immediate surroundings of such thermal-links are comparable with those in this standard.

General Information

Status
Published
Publication Date
18-Dec-2002
Technical Committee
Drafting Committee
Current Stage
DELPUB - Deleted Publication
Completion Date
08-Oct-2015
Ref Project

Relations

Buy Standard

Standard
IEC 60691:2002 - Thermal-links - Requirements and application guide Released:12/19/2002 Isbn:2831867215
English and French language
77 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
IEC 60691:2002+AMD1:2006+AMD2:2010 CSV - Thermal-links - Requirements and application guide Released:2/25/2010 Isbn:9782832222034
English and French language
154 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


NORME CEI
INTERNATIONALE IEC
INTERNATIONAL
Troisième édition
STANDARD
Third edition
2002-12
Protecteurs thermiques –
Prescriptions et guide d'application
Thermal-links –
Requirements and application guide
Numéro de référence
Reference number
CEI/IEC 60691:2002
Numérotation des publications Publication numbering
Depuis le 1er janvier 1997, les publications de la CEI As from 1 January 1997 all IEC publications are
sont numérotées à partir de 60000. Ainsi, la CEI 34-1 issued with a designation in the 60000 series. For
devient la CEI 60034-1. example, IEC 34-1 is now referred to as IEC 60034-1.
Editions consolidées Consolidated editions
Les versions consolidées de certaines publications de la The IEC is now publishing consolidated versions of its
CEI incorporant les amendements sont disponibles. Par publications. For example, edition numbers 1.0, 1.1
exemple, les numéros d’édition 1.0, 1.1 et 1.2 indiquent and 1.2 refer, respectively, to the base publication,
respectivement la publication de base, la publication de the base publication incorporating amendment 1 and
base incorporant l’amendement 1, et la publication de the base publication incorporating amendments 1
base incorporant les amendements 1 et 2. and 2.
Informations supplémentaires Further information on IEC publications
sur les publications de la CEI
Le contenu technique des publications de la CEI est The technical content of IEC publications is kept
constamment revu par la CEI afin qu'il reflète l'état under constant review by the IEC, thus ensuring that
actuel de la technique. Des renseignements relatifs à the content reflects current technology. Information
cette publication, y compris sa validité, sont dispo- relating to this publication, including its validity, is
nibles dans le Catalogue des publications de la CEI available in the IEC Catalogue of publications
(voir ci-dessous) en plus des nouvelles éditions, (see below) in addition to new editions, amendments
amendements et corrigenda. Des informations sur les and corrigenda. Information on the subjects under
sujets à l’étude et l’avancement des travaux entrepris consideration and work in progress undertaken by the
par le comité d’études qui a élaboré cette publication, technical committee which has prepared this
ainsi que la liste des publications parues, sont publication, as well as the list of publications issued,
également disponibles par l’intermédiaire de: is also available from the following:
• Site web de la CEI (www.iec.ch) • IEC Web Site (www.iec.ch)
• Catalogue des publications de la CEI • Catalogue of IEC publications
Le catalogue en ligne sur le site web de la CEI The on-line catalogue on the IEC web site
(http://www.iec.ch/searchpub/cur_fut.htm) vous permet (http://www.iec.ch/searchpub/cur_fut.htm) enables
de faire des recherches en utilisant de nombreux you to search by a variety of criteria including text
critères, comprenant des recherches textuelles, par searches, technical committees and date of
comité d’études ou date de publication. Des publication. On-line information is also available
informations en ligne sont également disponibles sur on recently issued publications, withdrawn and
les nouvelles publications, les publications rempla- replaced publications, as well as corrigenda.
cées ou retirées, ainsi que sur les corrigenda.
• IEC Just Published • IEC Just Published
Ce résumé des dernières publications parues This summary of recently issued publications
(http://www.iec.ch/online_news/justpub/jp_entry.htm) (http://www.iec.ch/online_news/justpub/jp_entry.htm)
est aussi disponible par courrier électronique. is also available by email. Please contact the
Veuillez prendre contact avec le Service client Customer Service Centre (see below) for further
(voir ci-dessous) pour plus d’informations. information.
• Service clients • Customer Service Centre
Si vous avez des questions au sujet de cette If you have any questions regarding this
publication ou avez besoin de renseignements publication or need further assistance, please
supplémentaires, prenez contact avec le Service contact the Customer Service Centre:
clients:
Email: custserv@iec.ch Email: custserv@iec.ch
Tél: +41 22 919 02 11 Tel: +41 22 919 02 11
Fax: +41 22 919 03 00 Fax: +41 22 919 03 00
.
NORME CEI
INTERNATIONALE IEC
INTERNATIONAL
Troisième édition
STANDARD
Third edition
2002-12
Protecteurs thermiques –
Prescriptions et guide d'application
Thermal-links –
Requirements and application guide
 IEC 2002 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch  Web: www.iec.ch
CODE PRIX
W
Commission Electrotechnique Internationale PRICE CODE
International Electrotechnical Commission
Международная Электротехническая Комиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

– 2 – 60691  CEI:2002
SOMMAIRE
AVANT-PROPOS . 4
INTRODUCTION .8
1 Domaine d'application.10
2 Références normatives .12
3 Définitions .14
4 Prescriptions générales .16
5 Conditions générales d'essais.18
6 Classification .22
7 Marquage .22
8 Documentation.24
9 Prescriptions d'ordre mécanique .24
10 Prescriptions d'ordre électrique.32
11 Essais de température .46
12 Protection contre la rouille .48
Annexe A (normative) Guide d'application .52
Annexe B (normative) Variante d'essai de vieillissement pour les protecteurs
thermiques avec T plus grand que 250 °C pour utilisation dans les fers électriques.54
h
Annexe C (normative) Essai de vieillissement après exposition à une chaleur conductrice.56
Annexe D (informative) Evaluation de la tenue de température étendue .66
Annexe E (normative) Essai de vieillissement des enrobages .70
Annexe F (normative) Prescriptions d’identification .74
Annexe G (informative) Indélébilité du marquage .76
Figure 1 – Essai de torsion.30
Figure C.1 – Ensemble fixe d’essai typique .62
Figure C.2 – Etuve typique d’essai de protecteur thermique .64
Figure D.1 – Support typique de bornes d’essai fixes .68
Figure E.1 – Temps de conditionnement contre température de l’étuve pour des index
de température proposés .72
Figure G.1 – Appareil pour vérifier l'indélébilité des marquages .76
Tableau 1 – Programme d'essais .20
Tableau 2 – Robustesse des bornes – Valeurs des efforts de traction et de poussée
minimaux prescrits .32
Tableau 3 – Lignes de fuite et distances d'isolement (valeurs minimales absolues).34
Tableau 4 – Tensions d'essai pour la rigidité diélectrique.36
Tableau 5 – Courant d’essai pour courant de coupure.40
Tableau 6 – Pouvoir de l’essai de court-circuit limité .44

60691  IEC:2002 – 3 –
CONTENTS
FOREWORD . 5
INTRODUCTION .9
1 Scope .11
2 Normative references.13
3 Definitions .15
4 General requirements .17
5 General notes on tests.19
6 Classification .23
7 Marking .23
8 Documentation.25
9 Mechanical requirements .25
10 Electrical requirements .33
11 Temperature tests.47
12 Resistance to rusting .49
Annex A (normative) Application guide.53
Annex B (normative) Alternative ageing test for thermal-links with T
h
greater than 250 °C for use in electric irons .55
Annex C (normative) Conductive heat ageing test .57
Annex D (informative) Extended holding temperature evaluation .67
Annex E (normative) Seal ageing test .71
Annex F (normative) Identification requirements.75
Annex G (informative) Indelibility of markings .77
Figure 1 – Bending/twist test .31
Figure C.1 – Typical test fixture assembly .63
Figure C.2 – Typical thermal-link test oven.65
Figure D.1 – Typical terminal block support test fixture .69
Figure E.1 – Conditioning time versus oven temperature for proposed temperature index .73
Figure G.1 – Apparatus for testing durability of markings .77
Table 1 – Test schedule .21
Table 2 – Strength of terminals – Minimum required tensile and thrust test forces.33
Table 3 – Creepage distances and clearances (absolute minimum values).35
Table 4 – Test voltages for dielectric strength .37
Table 5 – Test current for interrupting test.41
Table 6 – Limited short-circuit test capacity.45

– 4 – 60691  CEI:2002
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
PROTECTEURS THERMIQUES –
PRESCRIPTIONS ET GUIDE D'APPLICATION
AVANT-PROPOS
1) La CEI (Commission Électrotechnique Internationale) est une organisation mondiale de normalisation
composée de l'ensemble des comités électrotechniques nationaux (Comités nationaux de la CEI). La CEI a
pour objet de favoriser la coopération internationale pour toutes les questions de normalisation dans les
domaines de l'électricité et de l'électronique. A cet effet, la CEI, entre autres activités, publie des Normes
internationales. Leur élaboration est confiée à des comités d'études, aux travaux desquels tout Comité national
intéressé par le sujet traité peut participer. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec la CEI, participent également aux travaux.
...


IEC 60691 ®
Edition 3.2 2010-02
CONSOLIDATED
VERSION
VERSION
CONSOLIDÉE
colour
inside
Thermal-links – Requirements and application guide

Protecteurs thermiques – Prescriptions et guide d'application

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 15
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 60 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient plus de 30 000 termes et définitions en
Spécifications techniques, Rapports techniques et autres
anglais et en français, ainsi que les termes équivalents dans
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
15 langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.

Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
Plus de 60 000 entrées terminologiques électrotechniques, en
La recherche avancée permet de trouver des publications IEC
en utilisant différents critères (numéro de référence, texte, anglais et en français, extraites des articles Termes et
comité d’études,…). Elle donne aussi des informations sur les Définitions des publications IEC parues depuis 2002. Plus
projets et les publications remplacées ou retirées. certaines entrées antérieures extraites des publications des

CE 37, 77, 86 et CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished

Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
csc@iec.ch.
IEC 60691 ®
Edition 3.2 2010-02
CONSOLIDATED
VERSION
VERSION
CONSOLIDÉE
colour
inside
Thermal-links – Requirements and application guide

Protecteurs thermiques – Prescriptions et guide d'application

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.120.50 ISBN 978-2-8322-2203-4

IEC 60691 ®
Edition 3.2 2010-02
REDLINE VERSION
VERSION REDLINE
colour
inside
Thermal-links – Requirements and application guide

Protecteurs thermiques – Prescriptions et guide d'application

– 2 – IEC 60691:2002
+AMD1:2006+AMD2:2010 CSV  IEC 2010
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope and object . 6
2 Normative references . 6
3 Definitions . 7
4 General requirements . 9
5 General notes on tests . 9
6 Classification . 13
7 Marking . 13
8 Documentation . 14
9 Mechanical requirements . 14
10 Electrical requirements . 18
11 Temperature tests . 25
12 Resistance to rusting . 27
13 Manufacturer’s validation programme . 27

Annex A (normative) Application guide . 28
Annex B (normative) Alternative ageing test for thermal-links with T greater than
h
250 °C for use in electric irons . 29
Annex C (normative) Conductive heat ageing test . 30
Annex D (informative) Extended holding temperature evaluation . 34
Annex E (normative) Seal ageing test . 36
Annex F (normative) Identification requirements . 38
Annex G (informative) Indelibility of markings . 39

Figure 1 – Bending/twist test . 17
Figure C.1 – Typical test fixture assembly . 32
Figure C.2 – Typical thermal-link test oven . 33
Figure D.1 – Typical terminal block support test fixture . 35
Figure E.1 – Conditioning time versus oven temperature for proposed temperature index . 37
Figure G.1 – Apparatus for testing durability of markings . 39

Table 1 – Test schedule . 12
Table 2 – Strength of terminals – Minimum required tensile and thrust test forces . 18
Table 3 – Creepage distances and clearances (absolute minimum values) . 19
Table 4 – Test voltages for dielectric strength . 20
Table 5 – Test current for interrupting test . 22
Table 6 – Limited short-circuit test capacity . 24

+AMD1:2006+AMD2:2010 CSV  IEC 2010
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
THERMAL-LINKS –
REQUIREMENTS AND APPLICATION GUIDE

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
This Consolidated version of IEC 60691 bears the edition number 3.2. It consists of the
third edition (2002-12) [documents 32C/321/FDIS and 32
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.