IEC 61058-2-1:2010
(Main)Switches for appliances - Part 2-1: Particular requirements for cord switches
Switches for appliances - Part 2-1: Particular requirements for cord switches
IEC 61058-2-1:2010 applies to cord switches (mechanical or electronic) for appliances actuated by hand, by foot or by other human activity, to operate or control electrical appliances and other equipment for household or similar purposes with a rated voltage not exceeding 250 V and a rated current not exceeding 16 A. This second edition cancels and replaces the first edition published in 1992 and its amendment 1 (1995) and constitutes a technical revision. The main changes from the first edition are as follows:
- Scope, Definitions;
- Protection against electric shock;
- Provision for earthing;
- Construction;
- Fire hazard;
- Abnormal operation and fault conditions for electronic switches;
- Components for electronic switches;
- EMC requirements.
This publication is to be read in conjunction with IEC 61058-1:2000.
Interrupteurs pour appareils - Partie 2-1: Règles particulières pour les interrupteurs pour câbles souples
La CEI 61058-2-1:2010 s'applique aux interrupteurs pour câbles souples (mécaniques ou électriques) pour appareils manoeuvrés à la main, au pied ou par d'autres activités humaines, pour actionner ou commander des appareils électriques et autres matériels pour usages domestiques et analogues, de tension assignée ne dépassant pas 250 V et de courant assigné ne dépassant pas 16 A. Cette deuxième édition annule et remplace la première édition parue en 1992 et son amendement 1 (1995) et constitue une révision technique. Les changements principaux par rapport à la première édition figurent dans les parties suivantes:
- Domaine d'application, Définitions;
- Protection contre les chocs électriques;
- Disposition en vue de la mise à la terre;
- Construction;
- Risque d'incendie;
- Fonctionnement anormal et conditions de défaut des interrupteurs électroniques;
- Composants pour interrupteurs électroniques;
- Exigences CEM.
Cette publication doit être lue conjointement avec la CEI 61058-1:2000.
General Information
Relations
Standards Content (Sample)
IEC 61058-2-1 ®
Edition 2.0 2010-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Switches for appliances –
Part 2-1: Particular requirements for cord switches
Interrupteurs pour appareils –
Partie 2-1: Règles particulières pour les interrupteurs
pour câbles souples
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.
IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
§ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
§ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
§ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
§ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
§ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
§ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
§ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
§ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 61058-2-1 ®
Edition 2.0 2010-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Switches for appliances –
Part 2-1: Particular requirements for cord switches
Interrupteurs pour appareils –
Partie 2-1: Règles particulières pour les interrupteurs
pour câbles souples
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
T
CODE PRIX
ICS 29.120.40 ISBN 978-2-88912-263-9
– 2 – 61058-2-1 Ó IEC:2010
CONTENTS
FOREW ORD . 3
1 Scope . 5
2 Normativ e references . 5
3 Def initions . 6
4 General requirement . 7
5 General notes on tests. 7
6 Rating . 7
7 Classif ication . 7
8 Marking and documentation . 8
9 Protection against electric shock . 8
10 Provision for earthing . 9
11 Terminals and terminations . 9
12 Construction . 10
13 Mechanism . 15
14 Protection against solid objects, ingress of water and humid conditions . 15
15 Insulation resistance and dielectric strength . 15
16 Heating . 15
17 Endurance . 15
18 Mechanical strength . 16
19 Screws, current-carrying parts and connections . 17
20 Clearances, creepage distances and distances through insulation and coatings of
rigid printed board assemblies . 17
21 Fire hazard . 17
22 Resistance to rusting . 17
23 Abnormal operation and fault conditions for electronic switches . 17
24 Components for electronic switches . 17
25 EMC requirements . 18
Annexes . 23
Figure 101 – Pull apparatus for testing the cord anchorage . 18
Figure 102 – Apparatus for flexing test . 19
Figure 103 – Tumbling barrel . 20
Figure 104 – Torque apparatus for testing the cord anchorage . 21
Figure 105 – Example for the insulation system . 22
Table 3 – Switch information . 8
Table 4 – Resistive current carried by the terminal and related cross-sectional areas
of terminals for unprepared conductors . 9
Table 101 – Rated currents for resistor loads and related type of cords . 11
Table 102 – Size of conductor . 14
Table 103 – Torque values for insulating material screws . 17
61058-2-1 Ó IEC:2010 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SWITCHES FOR APPLIANCES –
Part 2-1: Particular requirements for cord switches
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in
addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61058-2-1 has been prepared by subcommittee 23J: Switches
for appliances, of IEC technical committee 23: Electrical accessories.
This second edition cancels and replaces the first edition published in 1992 and its
amendment 1 (1995) and constitutes a technical revision.
The main changes from the first edition are as follows:
Scope, Definitions; Protection against electric shock; Provision for earthing; Construction;
Fire hazard; Abnormal operation and fault conditions for electronic switches; Components
for electronic switches; EMC requirements.
– 4 – 61058-2-1 Ó IEC:2010
The text of this standard is based on the following documents:
CDV Report on voting
23J/326/CDV 23J/337/RVC
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
This standard is to be read in conjunction with the IEC 61058-1:2000, Switches for
appliances – Part 1: General requirements, and its amendments 1 (2001) and 2 (2007).
This Part 2-1 supplements or modifies the correspondin
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.