IEC 60255-151:2009

Measuring relays and protection equipment - Part 151: Functional requirements for over/under current protection

IEC 60255-151:2009 specifies minimum requirements for over/under current relays. It includes a specification of the protection function, measurement characteristics and time delay characteristics. Defines the influencing factors that affect the accuracy under steady state conditions and performance characteristics during dynamic conditions.

Relais de mesure et dispositifs de protection - Partie 151: Exigences fonctionnelles pour les protections à minimum et maximum de courant

La CEI 60255-151:2009 spécifie les exigences minimales relatives aux relais à maximum/minimum de courant. Cette norme inclut la spécification de la fonction de protection, les caractéristiques de mesure et les caractéristiques de temporisation. Elle définit les facteurs d'influence affectant la précision, en conditions de régime établi et les caractéristiques de performance en conditions dynamiques.

General Information

• Status: Published
• Publication Date: 27-Aug-2009
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 29.120.70 - Relays
• Technical Committee: TC 95 - Measuring relays and protection equipment
• Drafting Committee: MT 4 - TC 95/MT 4
• Current Stage: PPUB - Publication issued
• Start Date: 30-Sep-2009
• Completion Date: 28-Aug-2009

Relations

• Replaces: IEC 60255-3:1989 - Electrical relays - Part 3: Single input energizing quantity measuring relays with dependent or independent time
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 60255-151 ®
Edition 1.0 2009-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Measuring relays and protection equipment –
Part 151: Functional requirements for over/under current protection

Relais de mesure et dispositifs de protection –
Partie 151: Exigences fonctionnelles pour les protections à minimum et
maximum de courant
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: [e-mail]
Tél.: [phone]
Fax: [phone]
IEC 60255-151 ®
Edition 1.0 2009-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Measuring relays and protection equipement –
Part 151: Functional requirements for over/under current protection

Relais de mesure et dispositifs de protection –
Partie 151: Exigences fonctionnelles pour les protections à minimum et
maximum de courant
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
V
CODE PRIX
ICS 29.120.70 ISBN 978-2-88910-078-1
– 2 – 60255-151 © IEC:2009
CONTENTS
FOREWORD.4
1 Scope and object.6
2 Normative references .6
3 Terms and definitions .6
4 Specification of the function.8
4.1 General .8
4.2 Input Energizing quantities / energizing quantities .8
4.3 Binary input signals .9
4.4 Functional logic .9
4.4.1 Operating characteristics .9
4.4.2 Reset characteristics .12
4.5 Binary output signals .16
4.5.1 Start (pick-up) signal .16
4.5.2 Operate (trip) signal.16
4.5.3 Other binary output signals.16
4.6 Additional influencing functions/conditions .16
4.7 Specific characteristics.16
5 Performance specification .17
5.1 Accuracy related to the characteristic quantity.17
5.2 Accuracy related to the operate time .18
5.3 Accuracy related to the reset time .18
5.4 Transient performance .19
5.4.1 Transient overreach.19
5.4.2 Overshoot time .19
5.4.3 Response to time varying value of the characteristic quantity .19
5.5 Current transformer requirements.19
6 Functional test methodology.20
6.1 General .20
6.2 Determination of steady state errors related to the characteristic quantity .20
6.2.1 Accuracy of setting (start) value .20
6.2.2 Reset ratio determination.22
6.3 Determination of steady state errors related to the start and operate time .23
6.4 Determination of steady state errors related to the reset time.23
6.5 Determination of transient performance .24
6.5.1 General .24
6.5.2 Transient overreach.24
6.5.3 Overshoot time .25
6.5.4 Response to time varying value of the characteristic quantity for
dependent time relays .26
7 Documentation requirements .27
7.1 Type test report.27
7.2 Other user documentation .27
Annex A (normative) Constants for dependent time operating and reset characteristics .29
Annex B (informative) Reset time determination for relays with trip output only.30
Bibliography.31

60255-151 © IEC:2009 – 3 –
Figure 1 – Simplified protection function block diagram.8
Figure 2 – Overcurrent independent time characteristic .10
Figure 3 – Undercurrent independent time characteristic .10
Figure 4 – Dependent time characteristic .11
Figure 5 – Definite time reset characteristic .13
Figure 6 – Definite time reset characteristic (alternative solution with instantaneous
reset after relay operation).14
Figure 7 – Dependent time reset characteristic .15
Figure 8 – Dependent time reset characteristic (alternative solution with instantaneous
reset after relay operation).16
Figure 9 – Voltage restrained characteristics .17
Figure 10 – Voltage controlled characteristics.17
Figure 11 – Typical test waveform for transient overreach .25
Figure 12 – Test waveform .26
Figure B.1 – Dependent reset time determination .30

Table 1 – Multiplier factor on operated time assigned error .18
Table 2 – Multiplier factor on reset time assigned error.19
Table 3 – Test points for overcurrent elements .23
Table 4 – Test points for undercurrent elements .23
Table 5 – Test points for overcurrent elements .24
Table 6 – Test points for undercurrent elements .24
Table 7 – Recommended values for the test .26
Table A.1 – Constants for dependent time operating and reset characteristics.29

– 4 – 60255-151 © IEC:2009
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
MEASURING RELAYS AND PROTECTION EQUIPMENT –

Part 151: Functional requirements for over/under current protection

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on tech
...