IEC 62148-17:2013

Fibre optic active components and devices - Package and interface standards - Part 17: Transmitter and receiver components with dual coaxial RF connectors

IEC 62148-17:2013 covers physical interface specification of transmitter and receiver components with dual coaxial RF connectors. Keywords: interface specification, transmitter and receiver components, dual coaxial RF connectors.
This publication is to be read in conjunction with IEC 62148-1:2002.

Composants et dispositifs actifs à fibres optiques - Normes de boîtiers et d'interface - Partie 17: Composants émetteurs et récepteurs munis de connecteurs coaxiaux RF doubles

La CEI 62148-17:2013 concerne la spécification de l'interface physique des composants émetteurs et récepteurs munis de connecteurs coaxiaux RF doubles. Mots clés: spécification de l'interface, composants émetteurs et récepteurs, connecteurs coaxiaux RF doubles.
Cette publication doit être lue conjointement avec la CEI 62148-1:2002.

General Information

• Status: Published
• Publication Date: 24-Sep-2013
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 33.180.99 - Other fibre optic equipment
• Technical Committee: SC 86C - Fibre optic systems and active devices

Relations

• Revised: IEC 62148-17:2023 - Fibre optic active components and devices - Package and interface standards - Part 17: Transmitter and receiver components with dual coaxial RF connectors
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 62148-17 ®
Edition 1.0 2013-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic active components and devices – Package and interface standards –
Part 17: Transmitter and receiver components with dual coaxial RF connectors

Composants et dispositifs actifs à fibres optiques – Normes de boitiers et
d’interface –
Partie 17: Composants émetteurs et récepteurs munis de connecteurs coaxiaux
RF doubles
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les
microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office Tel.: [phone]
3, rue de Varembé Fax: [phone]
CH-1211 Geneva 20 [e-mail]
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: [e-mail].

A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.

Liens utiles:
Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: [e-mail].
IEC 62148-17 ®
Edition 1.0 2013-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic active components and devices – Package and interface standards –

Part 17: Transmitter and receiver components with dual coaxial RF connectors

Composants et dispositifs actifs à fibres optiques – Normes de boitiers et

d’interface –
Partie 17: Composants émetteurs et récepteurs munis de connecteurs coaxiaux

RF doubles
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX N
ICS 33.180.99 ISBN 978-2-8322-1108-3

– 2 – 62148-17 © IEC:2013
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Abbreviations . 5
4 Electromagnetic compatibility (EMC) requirements . 5
5 Classification . 6
6 Specification of transmitter component with dual coaxial RF connectors . 6
6.1 General . 6
6.2 Pigtail interface . 6
6.3 Electrical interface . 6
6.3.1 General . 6
6.3.2 Numbering of electrical terminals . 6
6.3.3 Coaxial connector . 7
6.3.4 Electrical terminal assignment . 7
6.4 Package outline and footprint . 8
6.4.1 Drawing of package outline . 8
6.4.2 Drawing of footprint . 10
7 Specification of receiver component with dual coaxial RF connectors . 10
7.1 General . 10
7.2 Pigtail interface . 11
7.3 Electrical interface . 11
7.3.1 General . 11
7.3.2 Numbering of electrical terminals . 11
7.3.3 Coaxial connector . 11
7.3.4 Electrical terminal assignment . 11
7.4 Package outline and footprint . 12
7.4.1 Drawing of package outline . 12
7.4.2 Drawing of footprint . 13
Bibliography . 15

Figure 1 – Electrical terminal numbering assignments for transmitter component with
dual coaxial RF connectors . 6
Figure 2 – Coaxial RF connector interface . 7
Figure 3 – Package outline drawing . 9
Figure 4 – Recommended pattern layout for the PCB . 10
Figure 5 – Electrical terminal numbering assignments for receiver component with dual
coaxial RF connectors . 11
Figure 6 – Package outline . 13
Figure 7 – Recommended pattern layout for the PCB . 14

Table 1 – Terminal function definitions . 8
Table 2 – Terminal function definitions . 12

62148-17 © IEC:2013 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –
PACKAGE AND INTERFACE STANDARDS –

Part 17: Transmitter and receiver components
with dual coaxial RF connectors

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in
addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses
arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62148-17 has been prepared by subcommittee 86C: Fibre optic
systems and active devices, of IEC technical committee 86: Fibre optics.
This standard is to be read in conjunction with IEC 62148-1.
The text of this standard is based on the following documents:
FDIS Report on voting
86C/1165/FDIS 86C/1186/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 62148 series, published under the general title Fibre optic active
...