IEC 60335-2-8:2012/AMD2:2018
(Amendment)Amendment 2 - Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
Amendment 2 - Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
Amendement 2 - Appareils électrodomestiques et analogues - Sécurité - Partie 2-8: Exigences particulières pour les rasoirs, les tondeuses et appareils analogues
General Information
Relations
Standards Content (Sample)
IEC 60335-2-8 ®
Edition 6.0 2018-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 2
AM ENDEMENT 2
Household and similar electrical appliances – Safety –
Part 2-8: Particular requirements for shavers, hair clippers and similar
appliances
Appareils électrodomestiques et analogues – Sécurité –
Partie 2-8: Exigences particulières pour les rasoirs, les tondeuses et appareils
analogues
IEC 60335-2-8:2012-12/AMD2:2018-11(en-fr)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 21 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.
IEC publications search - webstore.iec.ch/advsearchform IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 67 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and
CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient 21 000 termes et définitions en anglais
Spécifications techniques, Rapports techniques et autres
et en français, ainsi que les termes équivalents dans 16
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.
Recherche de publications IEC -
Glossaire IEC - std.iec.ch/glossary
webstore.iec.ch/advsearchform
67 000 entrées terminologiques électrotechniques, en anglais
La recherche avancée permet de trouver des publications IEC et en français, extraites des articles Termes et Définitions des
en utilisant différents critères (numéro de référence, texte, publications IEC parues depuis 2002. Plus certaines entrées
comité d’études,…). Elle donne aussi des informations sur les antérieures extraites des publications des CE 37, 77, 86 et
projets et les publications remplacées ou retirées. CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just Si vous désirez nous donner des commentaires sur cette
Published détaille les nouvelles publications parues. publication ou si vous avez des questions contactez-nous:
Disponible en ligne et aussi une fois par mois par email. sales@iec.ch.
IEC 60335-2-8 ®
Edition 6.0 2018-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 2
AM ENDEMENT 2
Household and similar electrical appliances – Safety –
Part 2-8: Particular requirements for shavers, hair clippers and similar
appliances
Appareils électrodomestiques et analogues – Sécurité –
Partie 2-8: Exigences particulières pour les rasoirs, les tondeuses et appareils
analogues
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.120; 97.170 ISBN 978-2-8322-6263-4
– 2 – IEC 60335-2-8:2012/AMD2:2018
© IEC 2018
FOREWORD
This amendment has been prepared by IEC technical committee 61: Safety of household and
similar electrical appliances.
The text of this amendment is based on the following documents:
FDIS Report on voting
61/5710/FDIS 61/5727/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
NOTE The attention of National Committees is drawn to the fact that equipment manufacturers and testing
organizations may need a transitional period following publication of a new, amended or revised IEC publication in
which to make products in accordance with the new requirements and to equip themselves for conducting new or
revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation
nationally not earlier than 12 months or later than 36 months from the date of publication.
_____________
3 Terms and definitions
Add the following new definitions:
3.105
washable clipper
clipper, the hand-held part of which can be cleaned under water
3.106
wet clipper
clipper, the hand-held part of which may be used in a bath or shower
3.107
washable epilator
epilator, the hand-held part of which can be cleaned under water
3.108
wet epilator
epilator, the hand-held part of which may be used in a bath or shower
© IEC 2018
6 Classification
6.1 Replace the second paragraph of the modification by the following:
Washable shavers, wet shavers, washable clippers, wet clippers, washable epilators
and wet epilators shall be class II or class III.
6.2 Replace the first sentence of the addition by the following:
Washable shavers, wet shavers, washable clippers, wet clippers, washable epilators
and wet epilators shall be at least IPX7.
7 Marking and instructions
7.1 In the first paragraph of the addition, replace washable shavers by washable shavers,
washable clippers, and washable epilators.
In the second paragraph of the addition, replace wet shavers by wet shavers, wet clippers,
and wet epilators.
7.12 In the penultimate paragraph of the addition, replace “for shavers” by “for appliances”
and replace “washable shavers or wet shavers” by “washable shavers, wet shavers,
washable clippers, wet clippers, washable epilators or wet epilators”.
In the last paragraph of the addition, replace “washable shavers” by “washable shavers,
washable clippers, and washable epilators”.
7.12.1 Replace the text of the addition by the following:
The instructions for washable shavers, wet shavers, washable clippers, wet clippers,
washable epilators and wet epilators, other than those classified IPX7, shall state that the
parts that have to be fixed must be installed so they cannot fall into water.
11 Heating
11.8 Replace the first sentence of the addition by the following:
The temperature rise of parts that are in contact with skin in normal use, or are held in the
hand, shall not exceed the limits specified for handles which are continuously held in normal
use. The temperature rise of parts of hair clippers or trimmers that are in contact with hair in
normal use, and may contact the skin for short periods, shall not exceed the limits specified
for handles which in normal use are held for short periods only.
20 Stability and mechanical hazards
Replace the text by the following:
This clause of Part 1 is applicable except as follows.
20.1 Replacement:
Appliances, other than fixed appliances and hand-held appliances without a charging stand,
intended to be used on a surface such as the floor or a table, shall have adequate stability.
– 4 – IEC 60335-2-8:2012/AMD2:2018
© IEC 2018
Compliance is checked by the following test, appliances incorporating an appliance inlet being
fitted with an appropriate connector and flexible cord. Hand-held appliances with a charging
stand are subjected to the test while placed on their charging stand.
The appliance, not connected to the supply mains, is placed in any normal position of use on
a plane inclined at an angle of 10° to the horizontal, the supply cord resting on the inclined
plane in the most unfavourable position. However, if part of an appliance comes into contact
with the horizontal supporting surface when the appliance is tilted through an angle of 10°, the
appliance is placed on a horizontal support and tilted in the most unfavourable direction
through an angle of 10°.
NOTE 101 The test on the horizontal support can be necessary for appliances provided with rollers, castors or
feet. In this case, castors or wheels can be blocked to prevent the appliance from rolling.
Appliances intended to be filled with liquid by the user in normal use are tested empty or filled
with the most unfavourable quantity of water up to the capacity indicated in the instructions.
The appliance shall not overturn unless the appliance or the part of the appliance which
overturns complies with all of the following:
– it only contains circuits operating at SELV according to 8.1.4;
– it only contains low power circuits according to 19.11.1;
– it is dropped from a height of 700 mm on a rigidly supported hard wood board 5 times, the
appliance being held in different positions likely to occur. After the drops, the appliance or
part of the appliance as relevant shall maintain compliance with 15.1 and 20.2;
– if the weight is more than 200 g, it does not have sharp edges when ready for use. An
edge with a radius of 1 mm or more is not considered a sharp edge.
The test is repeated on appliances with heating elements with the angle of inclination
increased to 15°. If the appliance overturns in one or more positions, it is subjected to the
tests of Clause 11 in each of these overturned positions.
During this test, temperature rises shall not exceed the values shown in Table 9.
21 Mechanical strength
Add the following new subclause:
21.101 Hand-held parts of appliances shall have adequate mechanical strength and be
constructed to withstand such rough handling that may be expected in normal use.
Compliance is checked by the following test.
The hand-held part of the appliance is placed in a sling that is constructed by tying together
the four corners of a single layer of cheese cloth. The lowest point of the sling is suspended
at a height of 700 mm for animal clippers and animal shearers above a rigidly supported
hardwood board surface and at a height 900 mm above a concrete or similar hard surface for
other appliances.
The hand-held part of the appliance in the sling is dropped from a stationary position. The test
is carried out a total of five times with the hand-held part of the appliance being positioned so
that it falls onto the surface in five different orientations.
The appliance shall not be damaged to such an extent that compliance with 8.1 and Clause
29 is impaired.
© IEC 2018
22 Construction
22.26 In the first paragraph of the addition, replace "washable shavers" by "washable
shavers, washable clippers and washable epilators".
In the second paragraph of the addition, replace “wet shavers” by “wet shavers, wet
clippers and wet epilators”.
22.36 In the second paragraph of the addition, replace “washable shavers and wet shavers”
by “washable shavers, wet shavers, washable clipp
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.