IEC 60317-61:2012

Specifications for particular types of winding wires - Part 61: Polyester glass fibre wound, minimum class 180, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180

IEC 60317-61:2012 specifies the requirements of polyester glass fibre wound, impregnated, bare or enamelled rectangular copper winding wire, temperature index 180. The range of nominal conductor dimensions covered by this standard is:
- width: min. 2,0 mm; max.16,0 mm;
- thickness: min. 0,80 mm; max. 5,60 mm. Keywords: copper winding wire
This publication is to be read in conjunction with IEC 60317-0-8:2012.

Spécifications pour types particuliers de fils de bobinage - Partie 61: Fil de section rectangulaire en cuivre nu ou émaillé, guipé de fibres de verre avec polyester de classe d'au moins 180, imprégnées de vernis ou de résine, d'indice de température 180

La CEI 60317-61:2012 spécifie les exigences relatives au fil de bobinage en cuivre nu ou émaillé, guipé de fibres de verre avec polyester, imprégnées de vernis ou de résine, d'indice de température 180. La gamme des dimensions nominales des conducteurs couverte par la présente norme est:
- largeur: min. 2,0 mm; max. 16,0 mm;
- épaisseur: min. 0,80 mm; max. 5,60 mm. Mots clé: fil de bobinage en cuivre
Cette publication doit être lue conjointement avec la CEI 60317-0-8:2012.

General Information

• Status: Published
• Publication Date: 11-Jul-2012
• ICS: 29.060.10 - Wires
• Technical Committee: TC 55 - Winding wires
• Drafting Committee: WG 1 - TC 55/WG 1
• Current Stage: DELPUB - Deleted Publication
• Start Date: 27-Jul-2018
• Completion Date: 08-May-2020

Relations

• Revised: IEC 60317-61:2020 - Specifications for particular types of winding wires - Part 61: Polyester glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 60317-61


®


Edition 1.0 2012-07



INTERNATIONAL



STANDARD



NORME
INTERNATIONALE


Specifications for particular types of winding wires –
Part 61: Polyester glass fibre wound, minimum class 180, resin or varnish
impregnated, bare or enamelled rectangular copper wire, temperature index 180

Spécifications pour types particuliers de fils de bobinage –
Partie 61: Fil de section rectangulaire en cuivre nu ou émaillé, guipé de fibres
de verre avec polyester de classe d’au moins 180, imprégnées de vernis ou de
résine, d'indice de température 180


IEC 60317-61:2012

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED


Copyright © 2012 IEC, Geneva, Switzerland


All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,

please contact the address below or your local IEC member National Committee for further information.



Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les

microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.

Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette

publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office Tel.: [phone]
3, rue de Varembé Fax: [phone]
CH-1211 Geneva 20 [e-mail]
Switzerland www.iec.ch

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:

IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: [e-mail].


A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.


Liens utiles:

Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: [e-mail].

---------------------- Page: 2 ----------------------
IEC 60317-61



®



Edition 1.0 2012-07







INTERNATIONAL





STANDARD







NORME



INTERNATIONALE











Specifications for particular types of winding wires –

Part 61: Polyester glass fibre wound, minimum class 180, resin or varnish

impregnated, bare or enamelled rectangular copper wire, temperature index 180




Spécifications pour types particuliers de fils de bobinage –

Partie 61: Fil de section rectangulaire en cuivre nu ou émaillé, guipé de fibres


de verre avec polyester de classe d’au moins 180, imprégnées de vernis ou de

résine, d'indice de température 180













INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE

PRICE CODE
INTERNATIONALE

CODE PRIX K


ICS 29.060.10 ISBN 978-2-83220-188-6



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 3 ----------------------
– 2 – 60317-61 © IEC:2012



CONTENTS


FOREWORD . 3

INTRODUCTION . 5

1 Scope . 6

2 Normative references . 6

3 Terms, definitions and general notes and appearance . 6


3.1 Terms and definitions . 6

3.2 General notes . 6
3.2.1 Methods of test . 6
3.2.2 Winding wire . 7
3.3 Appearance . 7
4 Dimensions . 7
5 Electrical resistance . 7
6 Elongation . 7
7 Springiness . 7
8 Flexibility and adherence . 7
9 Heat shock . 7
10 Cut-through . 8
11 Resistance to abrasion . 8
12 Resistance to solvents . 8
13 Breakdown voltage . 8
14 Continuity of insulation . 8
15 Temperature index . 8
16 Resistance to refrigerants . 8
17 Solderability . 8
18 Heat or solvent bonding . 8
19 Dielectric dissipation factor . 8
20 Resistance to transformer oil . 8
23 Pin hole test . 8
30 Packaging . 9

Bibliography . 10

---------------------- Page: 4 ----------------------
60317-61 © IEC:2012 – 3 –


INTERNATIONAL ELECTROTECHNICAL COMMISSION

____________



SPECIFICATIONS FOR PARTICULAR

TYPES OF WINDING WIRES –



Part 61: Polyester glass fibre wound, minimum class 180, resin

or varnish impregnated, bare or enamelled rectangular

copper wire, temperature index 180




FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60317-61 has been prepared by IEC technical committee 55:
Winding wires.
The text of this standard is based on the following documents:
FDIS Report on voting
55/1322/FDIS 55/1335/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

---------------------- Page: 5 ----------------------
– 4 – 60317-61 © IEC:2012


This International standard is to be read in conjunction with the IEC 60317-0-8: 2012.


The numbering of clauses in this standard is not continuous from Clauses 20 and 30 in order

to reserve space for possible future wire requirements prior to those for wire packaging.


A list of all the parts in the IEC 60317 series, published under the general title Specifications

for particular types of winding wires can be found on the IEC website.


The committee has decided that the contents of this publication will remain unchanged until

the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data

related to the specific publication. At this date, the publication will be

• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

---------------------- Page: 6 ----------------------
60317-61 © IEC:2012 – 5 –


INTRODUCTION


This part of IEC 60317 is one of a series which deals with insulated wires used for windings in

electrical equipment. The series has three groups describing:


1) Winding wires – Test methods (IEC 60851);

2) Specifications for particular types of winding wires (IEC 60317);


3) Packaging of winding wires (IEC 60264).

---------------------- Page: 7 ----------------------
– 6 – 60317-61 © IEC:2012


SPECIFICATIONS FOR PARTICULAR

TYPES OF WINDING WIRES –



Part 61: Polyester glass fibre wound, minimum class 180 resin

or varnish impregnated, bare or enamelled rectangular

copper wire, temperature index 180








1 Scope
This part of IEC 60317 specifies the requirements of polyester glass fibre wound,
impregnated, bare or enamelled rectangular copper winding wire, temperature index 180.
NOTE For this type of wire, the heat shock test is inappropriate and therefore a heat shock temperature cannot be
established. Consequently, a class based on the requirements for temperature index and heat shock temperature
cannot be specified.
The range of nominal conductor dimensions covered by this standard is:
– width: min. 2,0 mm; max. 16,0 mm;
– thickness: min. 0,80 mm; max. 5,60 mm.
The specified combinations of width and thickness as well as the specified width/thickness
ratio are according to IEC 60317-0-8.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and
are indispensable for its application. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 60317-0-8:2012, Specifications for particular types of winding wires – Part 0-8: General
requirements – Polyester glass fibre wound, resin or varnish impregnated or not impregnated,
bare or enamelled rectangular copper wire
3 Terms, definitions and general notes and appearance

3.1 Terms and definitions
For the purposes of this document, the terms and definitions given in 3.1 of
IEC 60317-0-8:2012 shall apply.
3.2 General notes
3.2.1 Methods of test
See 3.2 of IEC 60317-0-8:2012.
In case of inconsistency between IEC 60317-0-8 and this standard, IEC 60317-61 shall
prevail.

---------------------- Page: 8 ----------------------
60317-61 © IEC:2012 – 7 –


3.2.2 Winding wire


The enamelled wire shall have a temperature index of at least 180 and shall be agreed

between purchaser and supplier.


The temperature index of the wire is dependent upon the type of impregnating agent used.

The impregnating agent applied to the polyester glass fibres shall not contain silicone an
...