Electroacoustics - Octave-band and fractional-octave-band filters - Part 1: Specifications

IEC 61260-1:2014 specifies performance requirements for analogue, sampled-data, and digital implementations of band-pass filters. The extent of the pass-band region of a filter's relative attenuation characteristic is a constant percentage of the exact mid-band frequency for all filters of a given bandwidth. An instrument conforming to the requirements of this standard may contain any number of contiguous band-pass filters covering any desired frequency range. Performance requirements are provided for two filter classes: class 1 and class 2. In general, specifications for class 1 and class 2 filters have the same design goals and differ mainly in the acceptance limits and the range of operational temperature. Acceptance limits for class 2 are greater than, or equal to, those for class 1. Maximum-permitted expanded uncertainties of measurement are also specified. Band-pass filters conforming to the performance requirements of this standard may be part of various measurement systems or may be an integral component of a specific instrument such as a spectrum analyser. This standard specifies the ranges of environmental conditions for operation of the filters. The required range depends on whether the instrument containing the filters is designed to be operated in a controlled environment or more generally in the field. Band-pass filters conforming to the requirements of this standard are capable of providing frequency-band-filtered spectral information for a wide variety of signals, for example, time-varying, intermittent or steady; broadband or discrete frequency; and long or short durations. This first edition of IEC 61260-1, future IEC 61260-2 and future IEC 61260-3, cancel and replace the first edition of IEC 61260 (1995) and its amendment 1 (2001). This edition constitutes a technical revision which includes the following significant technical changes with respect to the IEC 61260 (1995) and its amendment 1 (2001):
- the single document in the first edition of IEC 61260 (1995) and its amendment 1 (2001) is in IEC 61260 series separated into the three parts covering: specifications, pattern evaluation tests and periodic tests;
- the performance category class 0 is removed;
- the design goals for the specification can be based only base-10;
- the reference environmental conditions have been changed from 20 °C / 65 % RH to 23 °C / 50 % RH; and
- IEC 61260 (1995) specified tolerance limits without considering the uncertainty of measurement for verification of the specifications. IEC 61260 series specifies acceptance limits for the observed values and maximum-permitted uncertainty of measurements for laboratories testing conformance to specifications in the standard.

Electroacoustique ­ Filtres de bande d'octave et de bande d'une fraction d'octave - Partie 1: Spécifications

L'IEC 61260-1:2014 spécifie les exigences de performances des filtres passe-bande analogiques, à données échantillonnées et numériques. L'étendue de la bande passante de la caractéristique d'affaiblissement relatif d'un filtre est un pourcentage constant de la fréquence médiane exacte pour tous les filtres d'une bande passante donnée. Un instrument conforme aux exigences de la présente norme peut contenir n'importe quel nombre de filtres passe-bande adjacents couvrant n'importe quelle gamme de fréquences désirée. Les exigences de performances sont fournies pour deux classes de filtres: classe 1 et classe 2. En général, les spécifications pour les filtres de classe 1 et de classe 2 disposent des mêmes objectifs de conception et diffèrent principalement dans les limites d'acceptation et dans la plage de températures d'exploitation. Les limites d'acceptation de la classe 2 sont supérieures ou égales à celles de la classe 1. Les incertitudes de mesure élargies maximales autorisées sont également spécifiées. Les filtres passe-bande conformes aux exigences de la présente norme peuvent faire partie de différents systèmes de mesure ou peuvent être un composant intégré dans un instrument spécifique tel qu'un analyseur de spectre. La présente norme spécifie les gammes de conditions d'environnement pour le fonctionnement des filtres. La gamme exigée dépend du fait que l'instrument contenant les filtres est conçu pour fonctionner dans un environnement contrôlé ou plus généralement sur le terrain. Les filtres passe-bande conformes aux exigences de la présente norme sont capables de fournir une information spectrale filtrée en bandes de fréquences pour une large variété de signaux, comme des signaux variables dans le temps, intermittents ou permanents, à large bande ou composés de fréquences discrètes, de courtes ou de longues durées. Cette première édition de l'IEC 61260-1 (2014), la future IEC 61260-2 et la future IEC 61260-3, annulent et remplacent la première édition de l'IEC 61260 (1995) et son amendement 1 (2001). Cette édition constitue une révision technique qui inclut les modifications techniques majeures suivantes par rapport à l'IEC 61260 (1995) et son amendement 1 (2001):
- le document unique dans la première édition de l'IEC 61260 (1995) et son amendement 1 (2001) est, dans la série IEC 61260 divisé selon les trois parties suivantes: spécifications, essais d'évaluation d'un modèle et essais périodiques;
- l'IEC 61260-1 (2014) ne contient plus de catégorie de performances de classe 0;
- dans l'IEC 61260-1 (2014), les objectifs de conception de la spécification sont basés sur une conception en base 10 uniquement;
- les conditions d'environnement de référence sont passées de 20 °C / 65 % d'humidité relative à 23 °C / 50 % d'humidité relative;
- l'IEC 61260 (1995) et son amendement 1 (2001) spécifiait des limites de tolérance sans considérer l'incertitude de la mesure pour la vérification des spécifications. La nouvelle série IEC 61260 spécifie des limites d'acceptation pour les valeurs observées et l'incertitude maximale autorisée des mesures pour la conformité des essais de laboratoire aux spécifications de la norme.

General Information

Status
Published
Publication Date
13-Feb-2014
Technical Committee
Drafting Committee
Current Stage
PPUB - Publication issued
Start Date
15-Mar-2014
Completion Date
14-Feb-2014
Ref Project

Buy Standard

Standard
IEC 61260-1:2014 - Electroacoustics - Octave-band and fractional-octave-band filters - Part 1: Specifications
English and French language
88 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC 61260-1
®

Edition 1.0 2014-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Electroacoustics – Octave-band and fractional-octave-band filters –
Part 1: Specifications

Électroacoustique – Filtres de bande d'octave et de bande d'une fraction
d'octave –
Partie 1: Spécifications

IEC 61260-1:2014-02(EN-FR)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2014 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.


Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 14
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 55 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.


A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient plus de 30 000 termes et définitions en
Spécifications techniques, Rapports techniques et autres
anglais et en français, ainsi que les termes équivalents dans
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
14 langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.


Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
Plus de 55 000 entrées terminologiques électrotechniques, en
La recherche avancée permet de trouver
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.