IEC 60384-14-2:2004

Fixed capacitors for use in electronic equipment - Part 14-2: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Safety tests only

IEC 60384-14-2:2004 forms the basis for a uniform procedure for a common International Safety Mark. It implements the approval schedule for safety tests in IEC 60384-14, requires a declaration of design for parameters relevant to safety and prescribes conformance tests to be conducted on every lot prior to its release and requalification tests depending on changes to the declared design.
This publication is to be read in conjunction with IEC 60384-1:2008.

Condensateurs fixes utilisés dans les équipements électroniques - Partie 14-2: Spécification particulière cadre - Condensateurs fixes d'antiparasitage et raccordement à l'alimentation - Essais de sécurité uniquement

La CEI 60384-14-2:2004 constitue la base d'une procédure uniforme de marquage de sécurité international commun. Elle met en oeuvre le programme d'approbation pour les essais de sécurité de la CEI 60384-14, nécessite une déclaration de conception pour les paramètres relatifs à la sécurité et indique les essais de conformité à réaliser sur tous les lots avant leur livraison et les essais de requalification en fonction des modifications apportées à la conception déclarée.
Cette publication doit être lue conjointement avec la CEI 60384-1:2008.

General Information

• Status: Published
• Publication Date: 13-Oct-2004
• ICS: 31.060.10 - Fixed capacitors
• Technical Committee: TC 40 - Capacitors and resistors for electronic equipment
• Drafting Committee: MT 60384-14 - TC 40/MT 60384-14
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 07-Apr-2016

Relations

• Revised: IEC 60384-14-2:2016 - Fixed capacitors for use in electronic equipment - Part 14-2: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Safety tests only
• Effective Date: 05-Sep-2023

Standards Content (Sample)

INTERNATIONAL IEC
STANDARD 60384-14-2
First edition
2004-10
Fixed capacitors for use in electronic
equipment –
Part 14-2:
Blank detail specification –
Fixed capacitors for electromagnetic
interference suppression and connection
to the supply mains –
Safety tests only
Reference number
Publication numbering
As from 1 January 1997 all IEC publications are issued with a designation in the
60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.
Consolidated editions
The IEC is now publishing consolidated versions of its publications. For example,
edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the
base publication incorporating amendment 1 and the base publication incorporating
amendments 1 and 2.
Further information on IEC publications
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
publications (see below) in addition to new editions, amendments and corrigenda.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:
• IEC Web Site (www.iec.ch)
• Catalogue of IEC publications
The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to
search by a variety of criteria including text searches, technical committees
and date of publication. On-line information is also available on recently issued
publications, withdrawn and replaced publications, as well as corrigenda.
• IEC Just Published
This summary of recently issued publications (www.iec.ch/online_news/ justpub)
is also available by email. Please contact the Customer Service Centre (see
below) for further information.
• Customer Service Centre
If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:

Email: [e-mail]
Tel: [phone]
Fax: [phone]
INTERNATIONAL IEC
STANDARD 60384-14-2
First edition
2004-10
Fixed capacitors for use in electronic
equipment –
Part 14-2:
Blank detail specification –
Fixed capacitors for electromagnetic
interference suppression and connection
to the supply mains –
Safety tests only
 IEC 2004  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale L
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

– 2 – 60384-14-2  IEC:2004(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –

Part 14-2: Blank detail specification –
Fixed capacitors for electromagnetic interference
suppression and connection to the supply mains –
Safety tests only
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60384-14-2 has been prepared by IEC technical committee 40:
Capacitors and resistors for electronic equipment.
The text of this standard is based on the following documents:
FDIS Report on voting
40/1463/FDIS 40/1484/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
It should be read in conjunction with IEC 60384-1.

60384-14-2  IEC:2004(E) – 3 –
This standard forms Part 14-2 of IEC 60384, which is published under the general title Fixed
capacitors for use in electronic equipment.
Part 14 is composed as follows:
Part 14: Sectional specification – Fixed capacitors for electromagnetic interference
suppression and connection to the supply mains
Part 14-1: Blank detail specification – Fixed capacitors for electromagnetic interference
suppression and connection to the supply mains – Assessment level D
Part 14-2: Blank detail specification – Fixed capacitors for electromagnetic interference
suppression and connection to the supply mains – Safety tests only
Part 14-3: Blank detail specification – Fixed capacitors for electromagnetic interference
suppression and connection to the supply mains – Assessment level DZ
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
A bilingual version of this standard may be issued at a later date.

– 4 – 60384-14-2  IEC:2004(E)
INTRODUCTION
Blank detail specification
This blank detail specification forms the basis for a uniform procedure for a common
International Safety Mark. It implements the approval schedule for safety tests in
IEC 60384-14, requires a declaration of design for parameters relevant to safety and
prescribes conformance tests to be conducted on every lot prior to its release and
requalification tests depending on changes to the declared design.
In comparison with IEC 60384-14-1 which provides quality conformance and safety tests, this
specification is restricted to safety tests only.
The use of IEC 60384-14-1 may be more appropriate for components manufactured in mass
production, whereas the employment of this specification may be necessary in those cases
where approval and requalification tests contribute considerably to the costs of the product.
A blank detail specification is a supplementary document to the sectional specification and
contains requirements for style, layout and minimum content of detail specifications. Detail
specifications not complying with these requirements may not be considered as being in
accordance with IEC specifications, nor should they so be described.
In the preparation of detail specifications the content of 1.4 of the sectional specification
should be taken into account.
Identification of the detail specification
The first page of the detail specification should have the layout recommended on the next
page of this blank detail specification. The numbers between square brackets correspond to
the following information which should be inserted at the position indicated:
[1] The "International Electrotechnical Commission" or the National Standards Organization
under whose authority the detail specification is drafted.
[2] The IEC or National Standards number of the detail specification, date of issue and any
further information required by the national system.
[3] The number and issue number of the IEC, or national, generic, or sectional specification,
as re
...

IEC 60384-14-2 ®
Edition 1.0 2004-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fixed capacitors for use in electronic equipment –
Part 14-2: Blank detail specification – Fixed capacitors for electromagnetic
interference suppression and connection to the supply mains –Safety tests only

Condensateurs fixes utilisés dans les équipements électroniques –
Partie 14-2: Spécification particulière cadre - Condensateurs fixes
d'antiparasitage et raccordement à l'alimentation – Essais de sécurité
uniquement
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les
microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office Tel.: [phone]
3, rue de Varembé Fax: [phone]
CH-1211 Geneva 20 [e-mail]
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: [e-mail].

A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.

Liens utiles:
Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: [e-mail].
IEC 60384-14-2 ®
Edition 1.0 2004-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fixed capacitors for use in electronic equipment –

Part 14-2: Blank detail specification – Fixed capacitors for electromagnetic

interference suppression and connection to the supply mains –Safety tests only

Condensateurs fixes utilisés dans les équipements électroniques –

Partie 14-2: Spécification particulière cadre - Condensateurs fixes

d'antiparasitage et raccordement à l'alimentation – Essais de sécurité

uniquement
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX L
ICS 31.060.10 ISBN 978-2-83220-700-0

– 2 – 60384-14-2  IEC:2004
INTERNATIONAL ELECTROTECHNICAL COMMISSION
_____________
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –

Part 14-2: Blank detail specification –
Fixed capacitors for electromagnetic interference
suppression and connection to the supply mains –
Safety tests only
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60384-14-2 has been prepared by IEC technical committee 40:
Capacitors and resistors for electronic equipment.
This bilingual version (2013-05) corresponds to the monolingual English version, published in
2004-10.
The text of this standard is based on the following documents:
FDIS Report on voting
40/1463/FDIS 40/1484/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.

60384-14-2  IEC:2004 – 3 –
The French version of this standard has not been voted upon.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
It should be read in conjunction with IEC 60384-1.
This standard forms Part 14-2 of IEC 60384, which is published under the general title Fixed
capacitors for use in electronic equipment.
Part 14 is composed as follows:
Part 14: Sectional specification – Fixed capacitors for electromagnetic interference
suppression and connection to the supply mains
Part 14-1: Blank detail specification – Fixed capacitors for electromagnetic interference
suppression and connection to the supply mains – Assessment level D
Part 14-2: Blank detail specification – Fixed capacitors for electromagnetic interference
suppression and connection to the supply mains – Safety tests only
Part 14-3: Blank detail specification – Fixed capacitors for electromagnetic interference
suppression and connection to the supply mains – Assessment level DZ
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
– 4 – 60384-14-2  IEC:2004
INTRODUCTION
Blank detail specification
This blank detail specification forms the basis for a uniform procedure for a common
International Safety Mark. It implements the approval schedule for safety tests in
IEC 60384-14, requires a declaration of design for parameters relevant to safety and
prescribes conformance tests to be conducted on every lot prior to its release and
requalification tests depending on changes to the declared design.
In comparison with IEC 60384-14-1 which provides quality conformance and safety tests, this
specification is restricted to safety tests only.
The use of IEC 60384-14-1 may be more appropriate for components manufactured in mass
production, whereas the employment of this specification may be necessary in those cases
where approval and requalification tests contribute considerably to the costs of the product.
A blank detail specification is a supplementary document to the sectional specification and
contains requirements for style, layout and minimum content of detail specifications. Detail
specifications not complying with these requirements may not be considered as being in
accordance with IEC specifications, nor should they so be described.
In the preparation of detail specifications the content of 1.4 of the sectional specification
should be taken into account.
Identification of the detail specification
The first page of the detail specification should have the layout recommended on the next
page of this blank detail specification. The numbers between square brackets correspond to
the following information which should be inserted at the position indicated:
[1] The "International Electrotechnical Commission" or the National Standards Organization
under whose authority the detail specification is drafted.
[2] The IEC or National Standards number of the detail specification, date of issue and any
further information required by the national system.
[3] The number and issue number of the IEC, or national, generic, or sectional specification,
as relevant.
[4] If different from the IEC number, the national number of the detail specification, date of
issue and any further information required by the national system, together with any
amendment numbers.
Identification of the capacitor
[5] A short description of the type of capacitor or range of capacitors.
[6] Information on typical construction (when applicable).
NOTE For [5] and [6] the text to be given in the detail specification should be suitable for an entry in the IECQ
Register of Approvals.
[7] Outline drawing with main dimensions which are of importance for interchangeability
and/or reference to the appropriate national or international documents for outlines.
Alternatively, the drawing may be given in an annex to the detail specification, but [7]
should always contain an illustration of the general outer appearance of the component.
[8] The level(s) of quality assessment covered by the detail specification, as appropriate.
[9] Reference data giving information on the most important properties of the component
which allow comparison between the various component types intended for the same or
similar applications.
60384-14-2  IEC:2004 – 5 –
[1] IEC 60384-14-2-XXX [2]
QC 302421-XXX
IEC 60384-14-2 [4]
ELECTRONIC COMPONENTS OF ASSESSED QUALITY IN

ACCORDANCE WITH:
...