IEC 60310:2016/COR1:2018
(Corrigendum)Corrigendum 1 - Railway applications - Traction transformers and inductors on board rolling stock
Corrigendum 1 - Railway applications - Traction transformers and inductors on board rolling stock
Corrigendum 1 - Applications ferroviaires - Transformateurs de traction et bobines d'inductance à bord du matériel roulant
General Information
Relations
Standards Content (Sample)
IEC 2018
INTERNATIONAL ELECTROTECHNICAL COMMISSION
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
IEC 60310 IEC 60310
Edition 4.0 2016-01 Édition 4.0 2016-01
RAILWAY APPLICATIONS – TRACTION
APPLICATIONS FERROVIAIRES –
TRANSFORMERS AND
TRANSFORMATEURS DE TRACTION ET
INDUCTORS ON BOARD ROLLING STOCK
BOBINES D'INDUCTANCE À BORD DU
MATÉRIEL ROULANT
CO RRI G E NDUM 1
13.2.9.1 General 13.2.9.1 Généralités
In the second paragraph, replace Da
...
This May Also Interest You
IEC 60913:2024 specifies the requirements and tests for the design of overhead contact line systems, requirements for structures and their structural calculations and verifications as well as the requirements and tests for the design of assemblies and individual parts. This document is applicable to electric traction overhead contact line systems in heavy railways, light railways, for trolley bus lines, electric road systems (Annex E) and industrial railways of public and private operators. This document is applicable to new installations of overhead contact line systems and for the complete renewal of existing overhead contact line systems. The European standard EN 50119 has served as a basis for the elaboration of this document. This edition includes the following significant technical changes with respect to the previous edition:
a) title modified;
b) requirements for urban rail systems are included;
c) requirements for rigid overhead contact line (ROCL) are included;
d) additional definitions for new terms are included (Clause 3);
e) clearances and geometry of overhead contact line are improved (Clause 5);
f) urban aspects are added, for example wall anchors (Clause 6);
g) requirements for monitoring devices, automatic earthing and short-circuiting equipment are included (Clause 7);
h) requirements for overhead contact line for electric vehicles with pantograph on electrified roads are added (Annex E)
i) improvements on the basis of EN 50119:2020 and the questionnaire 9/2619A/Q
- Standard138 pagesEnglish languagesale 15% off
- Standard297 pagesEnglish languagesale 15% off
IEC 63190:2023 specifies the characteristics of copper and copper alloy catenary wires for use on overhead contact lines. This document also covers auxiliary catenary wires. It establishes the product characteristics, the test methods, checking procedures to be used with the catenary wires, together with packing, ordering and delivery conditions.
- Standard70 pagesEnglish and French languagesale 15% off
- Standard8 pagesEnglish and French languagesale 15% off
IEC 63076:2019 applies to electrical systems aboard vehicles of the trolley bus type, as defined in 3.1, fed with a nominal line voltage (Un) between 600 V DC and 750 V DC. This document defines the requirements and constructional advice, especially to avoid electrical danger to the public and to staff. Where special requirements exist for trolley buses, advice is given for mechanical and functional safety, as well as for protection against fire. This publication is based on EN 50502:2015. This document covers vehicles intended for public transportation. This document applies to:
- trolley buses without on-board isolation interface from the contact line,
- buses with a current rail for guidance in the road surface,
- guided buses with bipolar roof current collectors.
- Standard100 pagesEnglish and French languagesale 15% off
- Standard206 pagesEnglish and French languagesale 15% off
IEC 62590-3-1:2022 specifies the requirements and test methods for electronic power compensators for 1AC traction systems. This equipment is used to improve electric power quality inside the electric traction system and/or at the interface to the 3AC power network, applying power electronics technology.
This document applies to equipment which is installed to achieve one or more of the following objectives as its function(s):
- to mitigate voltage fluctuation;
- to improve power factor;
- to reduce imbalance at the interface to the 3AC power network.
This document applies to equipment with all possible configurations to implement different technical solutions for compensation, but equipment consisting of only passive components is excluded.
- Standard99 pagesEnglish and French languagesale 15% off
IEC 62499:2021 gives rules for testing methods for newly manufactured pantographs contact strips. Not all tests may be relevant to some designs of contact strips. This document excludes tests using a particular pantograph. Additional supplementary tests, out of the scope of this document, may be necessary to determine suitability for a particular application and are by prior agreement between customer and manufacturer.
It is based on EN 50405:2015. This second edition cancels and replaces the first edition published in 2008. This edition includes the following significant technical changes with respect to the previous edition:
a. Title modified;
b. The scope of this standard is changed from carbon contact strips to contact strips;
c. Replacement of several reference standards;
d. Several terms and abbreviated terms are introduced;
- The definitions of metalized contact strip and metal contact strip are introduced according to the metal or carbon content by weight;
- The definitions of contact strip structures and types are introduced;
e. Requirements for data sheets are introduced;
f. Table 1: Schedule of tests and Table 2: Sequence of tests are introduced;
g. the requirements for certain test methods and test acceptance criteria are updated;
h. Test of metal content for metalized contact strip, test of the coefficient of friction, optional test of the impact resistance of the carbon material and optional test of wear properties are added;
- Annex A and Annex B are introduced.
- Standard77 pagesEnglish and French languagesale 15% off
IEC 61375-2-8:2021 applies to all equipment and devices implemented according to IEC 61375-2-3:2015, IEC 61375-2-5:2014 and IEC 61375-3-4:2014, i.e. it covers the procedures to be applied to such equipment and devices when the conformance should be proven. The applicability of this document to a TCN implementation allows for individual conformance checking of the implementation itself, and is a pre-requisite for further interoperability checking between different TCN implementations.
- Standard356 pagesEnglish languagesale 15% off
- Standard736 pagesEnglish and French languagesale 15% off
IEC 62973-4:2021 applies to secondary sealed nickel-metal hydride battery technologies for auxiliary power supply systems used on rolling stock.
This document specifies the requirements of the characteristics and tests for the sealed nickel-metal hydride cells and supplements IEC 62973-1 which applies to any rolling stock types (e.g. light rail vehicles, tramways, streetcars, metros, commuter trains, regional trains, high speed trains, locomotives, etc.). Unless otherwise specified, the requirements of IEC 62973-1 apply. This document also specifies the requirements of the interface between the batteries and the battery chargers. This document is to be used in conjunction with IEC 62675, IEC 63115-1 and IEC 63115-2.
- Standard55 pagesEnglish and French languagesale 15% off
- Standard2 pagesEnglish and French languagesale 15% off
IEC 62973-2:2020 applies to NiCd rechargeable batteries for auxiliary power supply systems used on railway vehicles. It is an extension of IEC 62973-1:2018 which specifies common requirements for all battery technologies of other parts of IEC 62973. Unless otherwise specified, the requirements of IEC 62973-1:2018 apply.
Battery systems described in this document are used in conjunction with charging systems onboard rolling stock, as described in IEC 62973-1:2018. Charging systems (e.g. LVPS, converters, etc.) are excluded from the scope of this document.
This document also specifies the design, operation parameters, safety recommendations, routine and type tests, as well as marking and designation. This document is used in addition to IEC 60623:2017 or IEC 62259:2003 for NiCd Cells.
- Standard34 pagesEnglish languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.