Industrial communication networks - Fieldbus specifications - Part 5-13: Application layer service definition - Type 13 elements

IEC 61158-5-13:2007 defines the services provided to the FAL user at the boundary between the user and the Application Layer of the Fieldbus Reference Model, and SystemsManagement at the boundary between the Application Layer and Systems Management of the Fieldbus Reference Model. This standard specifies the structure and services of the Type 13 IEC fieldbus Application Layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498) and the OSI Application Layer Structure (ISO/IEC 9545). This first edition and its companion parts of the IEC 61158-5 subseries cancel and replace IEC 61158-5:2003. This part and its Type 13 companion parts also cancel and replace IEC/PAS 62408, published in 2005. This edition of this part constitutes an editorial revision. This edition of IEC 61158-5 includes the following significant changes from the previous edition:
- deletion of the former Type 6 fieldbus for lack of market relevance;
- addition of new types of fieldbuses;
- partition of part 5 of the third edition into multiple parts numbered 5-2, 5-3... This bilingual version (2014-12) corresponds to the monolingual English version, published in 2007-12.

Réseaux de communication industriels - Spécifications des bus de terrain - Partie 5-13: Définition des services des couches d'application - Eléments de Type 13

L'IEC 61158-5-13:2007 vise à définir les services mis en place pour l'utilisateur de la FAL, à la frontière entre l'utilisateur et la couche Application du modèle de référence de bus de terrain, et la Gestion des systèmes, à la frontière entre la couche Application et la Gestion des systèmes selon le modèle de référence de bus de terrain. La présente norme spécifie la structure et les services de Type 13 de la couche application des bus de terrain de la CEI, en conformité avec le Modèle de référence de base de l'OSI (ISO/CEI 7498) et la Structure de la couche application de l'OSI (ISO/CEI 9545). Cette première édition et ses parties connexes de la sous-série CEI 61158-5 annulent et remplacent la CEI 61158-5:2003. La présente partie et les autres normes applicables au type 13 annulent et remplacent aussi la CEI/PAS 62408, publiée en 2005. Cette édition de la CEI 61158-5 comporte les modifications significatives suivantes par rapport à l'édition précédente:
- suppression de l'ancien bus de terrain de Type 6 à cause d'un manque d'adéquation avec le marché;
- ajout de nouveaux types de bus de terrain;
- partition de la partie 5 de la troisième édition en plusieurs parties numérotées 5-2, 5-3,... La présente version bilingue (2014-12) correspond à la version anglaise monolingue publiée en 2007-12.

General Information

Status
Published
Publication Date
13-Dec-2007
Technical Committee
Drafting Committee
Current Stage
DELPUB - Deleted Publication
Completion Date
18-Aug-2014
Ref Project

Relations

Buy Standard

Standard
IEC 61158-5-13:2007 - Industrial communication networks - Fieldbus specifications - Part 5-13: Application layer service definition - Type 13 elements Released:12/14/2007 Isbn:2831894611
English language
56 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
IEC 61158-5-13:2007 - Industrial communication networks - Fieldbus specifications - Part 5-13: Application layer service definition - Type 13 elements Released:12/14/2007 Isbn:9782832219478
English and French language
115 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 61158-5-13
Edition 1.0 2007-12
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –
Part 5-13: Application layer service definition – Type 13 elements

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: 0Hinmail@iec.ch
Web: 1Hwww.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: 2Hwww.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: 3Hwww.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: 4Hwww.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: 5Hwww.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: 6Hcsc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 61158-5-13
Edition 1.0 2007-12
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –
Part 5-13: Application layer service definition – Type 13 elements

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XA
ICS 35.100.70; 25.040.40 ISBN 2-8318-9461-1

– 2 – 61158-5-13 © IEC:2007(E)
CONTENTS
FOREWORD.4
INTRODUCTION.6
1 Scope.7
1.1 Overview .7
1.2 Specifications.8
1.3 Conformance.8
2 Normative references .8
3 Terms, definitions, symbols, abbreviations and conventions .9
3.1 ISO/IEC 7498-1 terms .9
3.2 ISO/IEC 8822 terms .9
3.3 ISO/IEC 9545 terms .9
3.4 Fieldbus application-layer specific definitions .9
3.5 Abbreviations and symbols.16
3.6 Conventions .16
4 Concepts .19
4.1 Common concepts.19
4.2 Type specific concepts .19
5 Data type ASE.21
5.1 General .21
5.2 Formal definition of data type objects .21
5.3 FAL defined data types.21
5.4 Data type ASE service specification .26
6 Type 13 communication model specification .26
6.1 ASEs.26
6.2 ARs .47
6.3 Summary of FAL classes .54
6.4 Permitted FAL services by AREP role.55
Bibliography.56

Figure 1 – The ASEs of Type 13 .20
Figure 2 – The AR ASE conveys APDUs between APs .43

Table 1 – Overall structure of the OD.20
Table 2 – Ident service .29
Table 3 – Status service .30
Table 4 – NMT-req-invite service .31
Table 5 – NMT-state-command service .32
Table 6 – NMT-info service .33
Table 7 – SDO-download .35
Table 8 – SDO-down-mult.36
Table 9 – SDO-upload .38
Table 10 – SDO-up-mult .39
Table 11 – SDO-abort.40

61158-5-13 © IEC:2007(E) – 3 –
Table 12 – PDO-transfer .42
Table 13 – Conveyance of service primitives by AREP role.44
Table 14 – Valid combinations of AREP roles involved in an AR .44
Table 15 – FAL class summary .54
Table 16 – Services by AREP role .55

– 4 – 61158-5-13 © IEC:2007(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INDUSTRIAL COMMUNICATION NETWORKS –
FIELDBUS SPECIFICATIONS –
Part 5-13: Application layer service definition – Type 13 elements

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
NOTE  Use of some of the associated protocol types is restricted by their intellectual-property-right holders. In all
cases, the commitment to limited release of intellectual-property-rights made by the holders of those rights permits
a particular data-link layer protocol type to be used with physical layer and application layer protocols in type
combinations as specified explicitly in the IEC 61784 series. Use of the various protocol types in other
combinations may require permission of their respective intellectual-property-right holders.
International Standard IEC 61158-5-13 has been prepared by subcommittee 65C: Industrial
networks, of IEC technical committee 65: Industrial-process measurement, control and
automation.
This first edition and its companion parts of the IEC 61158-6 subseries cancel and replace
IEC 61158-5:2003. This edition of this part constitutes a technical addition. This part and its
Type 13 companion parts also cancel and replace IEC/PAS 62408, published in 2005.
This edition of IEC 61158-5 includes the following significant changes from the previous
edition:
a) deletion of the former Type 6 fieldbus for lack of market relevance;

61158-5-13 © IEC:2007(E) – 5 –
b) addition of new types of fieldbuses;
c) partition of part 5 of the third edition into multiple parts numbered -5-2, -5-3, …
The text of this standard is based on the following documents:
FDIS Report on voting
65C/475/FDIS 65C/486/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under http://webstore.iec.ch in the
data related to the specific publication. At this date, the publication will be:
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
NOTE  The revision of this standard will be synchronized with the other parts of the IEC 61158 series.
The list of all the parts of the IEC 61158 series, under the general title Industrial
communication networks – Fieldbus specifications, can be found on the IEC web site.

– 6 – 61158-5-13 © IEC:2007(E)
INTRODUCTION
This part of IEC 61158 is one of a series produced to facilitate the interconnection of
automation system components. It is related to other standards in the set as defined by the
“three-layer” fieldbus reference model described in IEC/TR 61158-1.
The application service is provided by the application protocol making use of the services
available from the data-link
...


IEC 61158-5-13 ®
Edition 1.0 2007-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial communication networks – Fieldbus specifications –
Part 5-13: Application layer service definition – Type 13 elements

Réseaux de communication industriels – Spécifications des bus de terrain –
Partie 5-13: Définition des services des couches d'application –
Éléments de Type 13
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 14
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 55 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient plus de 30 000 termes et définitions en
Spécifications techniques, Rapports techniques et autres
anglais et en français, ainsi que les termes équivalents dans
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
14 langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.

Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
Plus de 55 000 entrées terminologiques électrotechniques, en
La recherche avancée permet de trouver des publications IEC
en utilisant différents critères (numéro de référence, texte, anglais et en français, extraites des articles Termes et
comité d’études,…). Elle donne aussi des informations sur les Définitions des publications IEC parues depuis 2002. Plus
projets et les publications remplacées ou retirées. certaines entrées antérieures extraites des publications des

CE 37, 77, 86 et CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished

Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
csc@iec.ch.
IEC 61158-5-13 ®
Edition 1.0 2007-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial communication networks – Fieldbus specifications –

Part 5-13: Application layer service definition – Type 13 elements

Réseaux de communication industriels – Spécifications des bus de terrain –

Partie 5-13: Définition des services des couches d'application –

Éléments de Type 13
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XA
ICS 25.040.40; 35.100.70 ISBN 978-2-8322-1947-8

– 2 – IEC 61158-5-13:2007 © IEC 2007
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
1.1 Overview . 7
1.2 Specifications . 8
1.3 Conformance . 8
2 Normative references . 8
3 Terms, definitions, symbols, abbreviations and conventions . 9
3.1 ISO/IEC 7498-1 terms . 9
3.2 ISO/IEC 8822 terms . 9
3.3 ISO/IEC 9545 terms . 9
3.4 Fieldbus application-layer specific definitions . 9
3.5 Abbreviations and symbols . 16
3.6 Conventions . 16
4 Concepts . 19
4.1 Common concepts . 19
4.2 Type specific concepts . 19
5 Data type ASE . 21
5.1 General . 21
5.2 Formal definition of data type objects . 21
5.3 FAL defined data types . 21
5.4 Data type ASE service specification . 26
6 Type 13 communication model specification . 26
6.1 ASEs . 26
6.2 ARs . 47
6.3 Summary of FAL classes . 54
6.4 Permitted FAL services by AREP role . 55
Bibliography . 56

Figure 1 – The ASEs of Type 13 . 20
Figure 2 – The AR ASE conveys APDUs between APs . 43

Table 1 – Overall structure of the OD . 20
Table 2 – Ident service . 29
Table 3 – Status service . 30
Table 4 – NMT-req-invite service . 31
Table 5 – NMT-state-command service . 32
Table 6 – NMT-info service . 33
Table 7 – SDO-download . 35
Table 8 – SDO-down-mult . 36
Table 9 – SDO-upload . 38
Table 10 – SDO-up-mult . 39
Table 11 – SDO-abort . 40

Table 12 – PDO-transfer . 42
Table 13 – Conveyance of service primitives by AREP role . 44
Table 14 – Valid combinations of AREP roles involved in an AR . 44
Table 15 – FAL class summary . 54
Table 16 – Services by AREP role . 55

– 4 – IEC 61158-5-13:2007 © IEC 2007
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INDUSTRIAL COMMUNICATION NETWORKS –
FIELDBUS SPECIFICATIONS –
Part 5-13: Application layer service definition – Type 13 elements

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.