IEC 60371-3-6:1992/AMD1:2006

Amendment 1 - Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 6: Glass-backed mica paper with a B-stage epoxy resin binder

Amendement 1 - Spécification pour les matériaux isolants à base de mica - Partie 3: Spécifications pour matériaux particuliers - Feuille 6: Papier de mica renforcé de verre avec un agglomérant en résine époxyde à l'état B

General Information

• Status: Published
• Publication Date: 26-Sep-2006
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 29.035.50 - Mica based materials
• Technical Committee: TC 15 - Solid electrical insulating materials
• Drafting Committee: MT 11 - TC 15/MT 11
• Current Stage: PPUB - Publication issued
• Start Date: 15-Dec-2006
• Completion Date: 27-Sep-2006

Standards Content (Sample)

INTERNATIONAL IEC
STANDARD 60371-3-6
AMENDMENT 1
2006-09
Amendment 1
Specification for insulating materials
based on mica –
Part 3:
Specifications for individual materials –
Sheet 6: Glass-backed mica paper with
a B-stage epoxy resin binder
 IEC 2006 Droits de reproduction réservés  Copyright - all rights reserved
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale F

International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

– 2 – 60371-3-6 Amend. 1  IEC:2006(E)
FOREWORD
This amendment has been prepared by IEC technical committee 15: Standards on
specifications for electrical insulating materials.
The text of this amendment is based on the following documents:
FDIS Report on voting
15/333/FDIS 15/348/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the maintenance result date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
___________
Page 7
INTRODUCTION
Replace the existing text by the following new text:
This International Standard is one of a series which deals with insulating materials for use in
electrical equipment built up from mica splittings or mica paper, with or without reinforcement,
and with mica paper in its pure state.
The series consists of the following three parts:
Part 1: Definitions and general requirements (IEC 60371-1)
Part 2: Methods of test (IEC 60371-2)
Part 3: Specifications for individual materials (IEC 60371-3)
This standard contains one of the sheets comprising part 3, as follows:
Sheet 6: Glass-backed mica paper with a B-stage epoxy resin binder.

60371-3-6 Amend. 1  IEC:2006(E) – 3 –
Page 9
1 Scope
Insert the following two paragraphs after the existing paragraphs:
Materials which conform to this specification meet established levels of performance.
However, the selection of materials by a user for a specific application should be based on
the actual requirements necessary for adequate performance in that application and not
based on this specification alone.
Safety warning:
It is the responsibility of the user of the methods contained or referred to in this document to
ensure that they are used in a safe manner.
2 Normative references
Replace the existing references by the following:
IEC 60243-1:1998, Electric strength of insulating materials – Test methods – Part 1: Tests at
power frequencies
IEC 60371-2:2004, Specification for insulating materials based on mica – Part 2: Methods of
test
IEC 60371-3-2:2005, Insulating materials based on mica – Part 3: Specifications for individual
materials – Sheet 2: Mica paper
3 Designation
Replace the existing first two paragraphs by the following new paragraphs:
When ordering materials to this specification, only the specification and type numbers need
be quoted (see Table 1).
Example: IEC 60371-3-6: type 6.1.01
The type number is derived from:
– the specification sheet number 6
– followed by the sheet table number 1
– followed by the number of the product in the sheet table 01
Thus giving type number 6.1.01.
The final paragraph and note remain unchanged.

– 4 – 60371-3-6 Amend. 1  IEC:2006(E)
Page 11
Table 1
Replace the
...

IEC 60371-3-6 ®
Edition 1.0 2006-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Specification for insulating materials based on mica –
Part 3: Specifications for individual materials – Sheet 6: Glass-backed mica
paper with a B-stage epoxy resin binder

Spécification pour les matériaux isolants à base de mica –
Partie 3: Spécifications pour matériaux particuliers – Feuille 6: Papier de mica
renforcé de verre avec un agglomérant en résine époxyde à l'état B

IEC 60371-3-6:1992/A1:2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: [e-mail]
Tél.: [phone]
Fax: [phone]
IEC 60371-3-6 ®
Edition 1.0 2006-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Specification for insulating materials based on mica –
Part 3: Specifications for individual materials – Sheet 6: Glass-backed mica
paper with a B-stage epoxy resin binder

Spécification pour les matériaux isolants à base de mica –
Partie 3: Spécifications pour matériaux particuliers – Feuille 6: Papier de mica
renforcé de verre avec un agglomérant en résine époxyde à l'état B

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
F
CODE PRIX
ICS 29.035.50 ISBN 978-2-88910-180-1
– 2 – 60371-3-6 Amend. 1 © IEC:2006
FOREWORD
This amendment has been prepared by IEC technical committee 15: Standards on
specifications for electrical insulating materials.
This bilingual version, published in 2009-09, corresponds to the English version.
The text of this amendment is based on the following documents:
FDIS Report on voting
15/333/FDIS 15/348/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The French version of this amendment has not been voted upon.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the maintenance result date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
___________
Page 7
INTRODUCTION
Replace the existing text by the following new text:
This International Standard is one of a series which deals with insulating materials for use in
electrical equipment built up from mica splittings or mica paper, with or without reinforcement,
and with mica paper in its pure state.
The series consists of the following three parts:
Part 1: Definitions and general requirements (IEC 60371-1)
Part 2: Methods of test (IEC 60371-2)
Part 3: Specifications for individual materials (IEC 60371-3)
This standard contains one of the sheets comprising part 3, as follows:
Sheet 6: Glass-backed mica paper with a B-stage epoxy resin binder.

60371-3-6 Amend. 1 © IEC:2006 – 3 –
Page 9
1 Scope
Insert the following two paragraphs after the existing paragraphs:
Materials which conform to this specification meet established levels of performance.
However, the selection of materials by a user for a specific application should be based on
the actual requirements necessary for adequate performance in that application and not
based on this specification alone.
Safety warning:
It is the responsibility of the user of the methods contained or referred to in this document to
ensure that they are used in a safe manner.
2 Normative references
Replace the existing references by the following:
IEC 60243-1:1998, Electric strength of insulating materials – Test methods – Part 1: Tests at
power frequencies
IEC 60371-2:2004, Specification for insulating materials based on mica – Part 2: Methods of
test
IEC 60371-3-2:2005, Insulating materials based on mica – Part 3: Specifications for individual
materials – Sheet 2: Mica paper
3 Designation
Replace the existing first two paragraphs by the following new paragraphs:
When ordering materials to this specification, only the specification and type numbers need
be quoted (see Table 1).
Example: IEC 60371-3-6: type 6.1.01
The type number is derived from:
– the specification sheet number 6
– followed by the sheet table number 1
– followed by the number of the product in the sheet table 01
Thus giving type number 6.1.01.
The final paragraph and note remain unchanged.

– 4 – 60371-3-6 Amend. 1 © IEC:2006
Page 11
Table 1
Replace the title of Table 1 by the following new title:
Composition for calcinated muscovite mica paper (IEC 60371-3-2, classes 1 and 2)

Page 13
Table 2
Replace the title of Table 2 by the following new title:
Composition for uncalcinated muscovite and phlogopite mica papers (IEC 60371-3-2,
classes 3 and 4)
4.1 Mica paper
Replace the text of this subclause by the following new text:
Mica paper referred to in this specification shall comply with the requirements of IEC 60371-3-2.
5 Requirements: compositions and tolerances
Replace the text of this clause by the following new text:
When tested by the method of Clause 7 of IEC 60371-2, the composition of the products shall
lie within the limits of Table 1 and 2 for the appropriate grade of mica paper.

Page 15
6.3 Thickness
Replace the first sentence of this subclause by the following new sentence:
Measure the thickness in accordance with Clause 4 of IEC 60371-2, using the apparatus
given in 4.1.1 of that standard, making 10 measurements of one thickness of material.

Page 17
6.7 Tensile strength
Replace the first paragraph by the following new paragraph:
When tested by the method of Clause 8 in IEC 60371-2, the tensile strength in the warp and
weft directions shall be as shown in Table 4.

----------------
...