iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 62052-21:2004

(Main)

Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment

Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment

IEC 62052-21:2004 specifies general requirements for the type test of newly manufactured indoor tariff and load control equipment, like electronic ripple control receivers and time switches that are used to control electrical loads, multi-tariff registers and maximum demand indicator devices. This bilingual version (2016-07) corresponds to monolingual version published in 2004-05.

Equipement de comptage d'électricité (c.a.) - Prescriptions générales, essais et conditions d'essai - Partie 21: Equipement de tarification et de contrôle de charge

L'IEC 62052-21:2004 spécifie les prescriptions générales pour les essais de type d'équipements neufs de tarification et contrôle de charge, de type intérieur, tels que des récepteurs de télécommande centralisée ou des horloges de tarification qui sont utilisés pour le contrôle de charges électriques, de registres multi-tarifs ou des dispositifs indicateurs de maximum. La présente version bilingue (2016-07) correspond à la version monolingue publiée en 2004-05.

General Information

Status
Published
Publication Date
22-Nov-2016
ICS
01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
91.140.50 - Electricity supply systems
Technical Committee
TC 13 - Electrical energy measurement and control
Drafting Committee
WG 11 - TC 13/WG 11
Current Stage
PPUB - Publication issued
Start Date
30-Sep-2004
Completion Date
18-May-2004
Ref Project

Relations

Amended By
IEC 62052-21:2004/AMD1:2016 - Amendment 1 - Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment
Effective Date
05-Sep-2023

Buy Standard

IEC 62052-21:2004 - Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21: Tariff and load control equipmentIEC 62052-21:2004 - Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment
PreviousNext
Standard
IEC 62052-21:2004 - Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment
English and French language
87 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC 62052-21
®

Edition 1.0 2004-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Electricity metering equipment (a.c.) – General requirements, tests and test
conditions –
Part 21: Tariff and load control equipment

Équipement de comptage d’électricité (c.a.) – Prescriptions générales, essais et
conditions d’essai –
Partie 21: Equipement de tarification et de contrôle de charge

IEC 62052-21:2004-05(en-fr)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2004 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.


Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 15
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 60 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.


A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient plus de 30 000 termes et définitions en
Spécifications techniques, Rapports techniques et autres
anglais et en français, ainsi que les termes équivalents dans
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
15 langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.


Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 62053-24:2020(Main)
Electricity metering equipment - Particular requirements - Part 24: Static meters for fundamental component reactive energy (classes 0,5S, 1S, 1, 2 and 3)

IEC 62053-24:2020 applies only to static var-hour meters of accuracy classes 0,5S, 1S, 1, 2 and 3 for the measurement of alternating current electrical reactive energy in 50 Hz or 60 Hz networks and it applies to their type tests only.
This document uses a conventional definition of reactive energy where the reactive power and energy is calculated from the fundamental frequency components of the currents and voltages only.
This document applies to electricity metering equipment designed to:
• measure and control electrical energy on electrical networks (mains) with voltage up to 1 000 V AC;
• have all functional elements, including add-on modules, enclosed in, or forming a single meter case with exception of indicating displays;
• operate with integrated or detached indicating displays, or without an indicating display;
• be installed in a specified matching socket or rack;
• optionally, provide additional functions other than those for measurement of electrical energy.
Meters designed for operation with low power instrument transformers (LPITs as defined in the IEC 61869 series) may be considered as compliant with this document only if such meters and their LPITs are tested together and meet the requirements for directly connected meters.
This document does not apply to:
• meters for which the voltage line-to-neutral derived from nominal voltages exceeds 1 000 V AC;
• meters intended for connection with low power instrument transformers (LPITs as defined in the IEC 61869 series) when tested without such transformers;
• metering systems comprising multiple devices (except LPITs) physically remote from one another;
• portable meters;
• meters used in rolling stock, vehicles, ships and airplanes;
• laboratory and meter test equipment;
• reference standard meters;
• data interfaces to the register of the meter;
• matching sockets or racks used for installation of electricity metering equipment;
• any additional functions provided in electrical energy meters.
This document does not cover measures for the detection and prevention of fraudulent attempts to compromise a meter’s performance (tampering).
This second edition cancels and replaces the first edition published in 2014 and its amendment 1:2016. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition: see Annex E

  • Standard
    46 pages
    English and French language
    sale 15% off
IEC
IEC 62054-21:2004/AMD1:2017(Amendment)
Amendment 1 - Electricity metering (AC) - Tariff and load control - Part 21: Particular requirements for time switches

The contents of the corrigendum of March 2018 have been included in this copy.

  • Standard
    5 pages
    English and French language
    sale 15% off
IEC
IEC 62052-21:2004/AMD1:2016(Amendment)
Amendment 1 - Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment

The contents of the corrigendum of March 2018 have been included in this copy.

  • Standard
    25 pages
    English and French language
    sale 15% off
IEC
IEC 62054-11:2004/AMD1:2016(Amendment)
Amendment 1 - Electricity metering (a.c.) - Tariff and load control - Part 11: Particular requirements for electronic ripple control receivers

The contents of the corrigendum of March 2018 have been included in this copy.

  • Standard
    5 pages
    English and French language
    sale 15% off
IEC
IEC 62054-11:2004(Main)
Electricity metering (a.c.) - Tariff and load control - Part 11: Particular requirements for electronic ripple control receivers

Specifies particular requirements for the type test of newly manufactured indoor electronic ripple control receivers for the reception and interpretation of pulses of a single audio frequency superimposed on the voltage of the electricity distribution network and for the execution of the corresponding switching operations. In this system the mains frequency is generally used to synchronize the transmitter and receivers. Neither the control frequency nor the encoding are standardized in this standard.
This publication is of high relevance for Smart Grid.

  • Standard
    23 pages
    English language
    sale 15% off
IEC
IEC 62053-24:2014/AMD1:2016(Amendment)
Amendment 1 - Electricity metering equipment (a.c.) - Particular requirments - Part 24: Static meters for reactive energy at fundamental frequency (classes 0,5 S, 1 S and 1)

The contents of the corrigendum of March 2018 have been included in this copy.

  • Standard
    5 pages
    English and French language
    sale 15% off
IEC
IEC TS 62056-1-1:2016(Main)
Electricity metering data exchange - The DLMS/COSEM suite - Part 1-1: Template for DLMS/COSEM communication profile standards

IEC TS 62056-1-1:2016(E) defines a template for IEC 62056 communication profile standards. It provides the "Table of contents" of such standards and provides guidance to develop the content of the relevant clauses and subclauses.

  • Technical specification
    16 pages
    English language
    sale 15% off
IEC
IEC 62052-31:2015(Main)
Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests

IEC 62052-31:2015 specifies product safety requirements for equipment for electrical energy measurement and control. It applies to newly manufactured metering equipment designed to measure and control electrical energy on 50 Hz or 60 Hz networks with a voltage up to 600 V, where all functional elements, including add-on modules are enclosed in or form a single case. When such equipment is designed to be installed in a specified matching socket, then the requirements apply to, and the tests shall be performed on, equipment installed in its specified matching socket. However, requirements for sockets and inserting / removing the meters from the socket are outside the scope of this standard. This International Standard is also applicable to auxiliary input and output circuits.
This bilingual version (2016-11) corresponds to the monolingual English version, published in 2015-09.
The contents of the Interpretation Sheet 1 of June 2019 have been included in this copy.

  • Standard
    393 pages
    English and French language
    sale 15% off
IEC
IEC 62053-24:2014(Main)
Electricity metering equipment (a.c.) - Particular requirements - Part 24: Static meters for reactive energy at fundamental frequency (classes 0,5 S, 1S and 1)

IEC 62053-24:2014 applies only to newly manufactured transformer operated static var-hour meters of accuracy classes 0,5 S, and 1 S as well as direct connected static var-hour meters of accuracy class 1, for the measurement of alternating current electrical reactive energy in 50 Hz or 60 Hz networks and it applies to their type tests only. It uses a conventional definition of reactive energy where the reactive power and energy is calculated from the fundamental frequency components of the currents and voltages only.

  • Standard
    54 pages
    English and French language
    sale 15% off
IEC
IEC 62059-31-1:2008(Main)
Electricity metering equipment - Dependability - Part 31-1: Accelerated reliability testing - Elevated temperature and humidity

IEC 62059-31-1:2008 provides one of several possible methods for estimating product life characteristics by accelerated reliability testing. In this standard, elevated, constant temperature and humidity is applied to achieve acceleration. The method takes into account the effect of voltage and current variation. It is applicable to all types of metering equipment for energy measurement, tariff and load control in the scope of IEC TC 13. The method given in this standard may be used for estimating (with given confidence limits) product life characteristics of such equipment prior to and during serial production. This method may also be used to compare different designs. The contents of the corrigendum of December 2008 have been included in this copy.
This publication is of high relevance for Smart Grid.

  • Standard
    174 pages
    English and French language
    sale 15% off