IEC 61730-2:2004/AMD1:2011

Amendment 1 - Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing

Amendement 1 - Qualification pour la sûreté de fonctionnement des modules photovoltaïques (PV) - Partie 2: Exigences pour les essais

General Information

• Status: Published
• Publication Date: 13-Nov-2011
• ICS: 27.160 - Solar energy engineering
• Technical Committee: TC 82 - Solar photovoltaic energy systems
• Drafting Committee: WG 2 - TC 82/WG 2
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 18-Aug-2016

Relations

• Amends: IEC 61730-2:2004 - Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing
• Effective Date: 05-Sep-2023
• Revised: IEC 61730-2:2016 - Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 61730-2 ®
Edition 1.0 2011-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
AMENDMENT 1
AMENDEMENT 1
Photovoltaic (PV) module safety qualification –
Part 2: Requirements for testing

Qualification pour la sûreté de fonctionnement des modules photovoltaïques
(PV) –
Partie 2: Exigences pour les essais

IEC 61730-2:2004/A1:2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
 Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
 IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
 Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
 Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
 Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
 Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
 Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
 Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: [e-mail]
Tél.: [phone]
Fax: [phone]
IEC 61730-2 ®
Edition 1.0 2011-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
AMENDMENT 1
AMENDEMENT 1
Photovoltaic (PV) module safety qualification –
Part 2: Requirements for testing

Qualification pour la sûreté de fonctionnement des modules photovoltaïques
(PV) –
Partie 2: Exigences pour les essais

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE PRICE CODE
E
CODE PRIX
ICS 27.160 ISBN 978-2-88912-785-6

– 2 – 61730-2 Amend.1 © IEC:2011
FOREWORD
This amendment has been prepared by IEC technical committee 82: Solar photovoltaic energy
systems.
The text of this amendment is based on the following documents:
FDIS Report on Voting
82/660/FDIS 82/678/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
_____________
2 Normative references
Delete year information from all referenced standards.
Replace
IEC 60904-2, Photovoltaic devices – Part 2: Requirements for reference solar cells
by
IEC 60904-2, Photovoltaic devices – Part 2: Requirements for reference solar devices
Delete
IEC 60904-6, Photovoltaic devices – Part 6: Requirements for reference solar modules
4.5 Fire hazard tests
Table 4 – Fire hazard tests
61730-2 Amend.1 © IEC:2011 – 3 –
Add to: MST 25 test, under IEC 61646 column, 10.18.
5 Application classes and their necessary test procedures
Table 7 – Required tests, depending on the application class
Replace: MST 54 UV resistance by MST 54 UV pre-conditioning
8 Testing
Figure 1 – Test sequences
Replace: UV resistance test by UV pre-conditioning test.
Remove box: Hot-spot test.
Insert a new box: Hot-spot test into the test sequence, at right hand side after bypass diode
thermal test.
Remove from box IEC 61215/IEC 61646: 10.2.
Remove 10.2 previous to MST 23 and MST 32.
Add a new box MST 13 “Ground continuity test” between “Cut susceptibility test” and
“Accessibility test”, at the end of test sequence.
Change MST 34 and MST 25 boxes to blue colour.

– 4 – 61730-2 Amend.1 © IEC:2011

Indicates change from
Edition 1 are near the red
bar
Module safety test MST
IEC 61730
7 modules or
6 modules and 1 laminate
IEC 61215
Module performance test MPT
IEC 61646
The numbers in each box are references to final
Visual inspection
measurements, that are to be performed after
MST 01
MST or MPT (if required). In this example:
01  = Module safety test MST 01
17  = Module safety test MST 17
Component tests
Performance test
(IEC 61215,
IEC 61646)
11 pieces
of foil
3 modules
1 module Number of 1 module 1 module
modules depends 1 laminate
1 piece
on the module size
of
Dielectric withstand
junction
Control
test
box
MST 16
Test on
Ground continuity 6 knock
test outs
MST 13
Partial discharge
test
Fire test Module breakage test
Accessibility
MSTMST 1 155
MST 23
MST 32
test
MST 11
Conduit bending
test
Wet leakage current
MSTMST 3 333
test
MST 17
Terminal box
knock out test
1 m1 modulodulee
1 m1 modulodulee
1 module
MSTMST 4 444
1 laminate (module)
Thermal cycling test
DamDamp Heatp heat t Tesest t
UV pre-conditioning test
200 cycles
1000 h1 000 h
MST 54
MST 51a
MSTMST 5 533
01 16
01 16   01 16
Thermal cycling test Wet leakage c
...