IEC TS 62312-1-1:2008

Guideline for synchronization of audio and video - Part 1-1: Measurement methods for synchronization of audio and video equipment and systems - General

IEC/TS 62312-1-1 gives guidelines for methods of synchronization of audio and video and describes general measurement methods for the synchronization of audio and video equipment.

General Information

• Status: Published
• Publication Date: 10-Mar-2008
• ICS: 33.160.01 - Audio, video and audiovisual systems in general
• Technical Committee: TA 20 - Analogue and digital audio
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 02-Nov-2018

Relations

• Revised: IEC TS 62312-1-1:2018 - Guideline for synchronization of audio and video - Part 1-1: Measurement methods for synchronization of audio and video equipment and systems - General
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC/TS 62312-1-1
Edition 1.0 2008-03
TECHNICAL
SPECIFICATION
Guideline for synchronization of audio and video –
Part 1-1: Measurement methods for synchronization of audio and video
equipment and systems – General

IEC/TS 62312-1-1:2008(E)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,

please contact the address below or your local IEC member National Committee for further information.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
IEC/TS 62312-1-1
Edition 1.0 2008-03
TECHNICAL
SPECIFICATION
Guideline for synchronization of audio and video –
Part 1-1: Measurement methods for synchronization of audio and video
equipment and systems – General

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
N
ICS 33.160.01 ISBN 2-8318-9647-9

– 2 – TS 62312-1-1 © IEC:2008(E)

CONTENTS
FOREWORD.3

INTRODUCTION.5

1 Scope.6

2 Normative references .6

3 Terms and definitions .6

4 Measuring conditions.6

4.1 General conditions .6
4.1.1 Power supplies .6
4.1.2 Environmental conditions.7
4.2 Specific conditions .7
4.3 General settings .7
4.4 Specific settings .7
5 Measurement methods .8
5.1 General block diagram .8
5.2 Test signal source and test signal .8
5.2.1 General .8
5.2.2 Signal generator .8
5.2.3 Test disc.8
5.3 EUT.9
5.3.1 Equipment .9
5.3.2 Compound equipment.10
5.4 Measuring instruments .11
5.4.1 General .11
5.4.2 Measurement of signal .11
5.4.3 Measurement of reproduced signal.11
5.4.4 Specific requirement.12

Annex A (informative) Assessment of the result of measurement .13

Bibliography.14

Figure 1 – General block diagram for measurement .8
Figure 2 – Audio and video device .9
Figure 3 – Source device .10
Figure 4 – Display device.10
Figure 5 – Recorder device.10
Figure 6 – Compound equipment .11
Figure 7 – Measurement of reproduced signal .12

TS 62312-1-1 © IEC:2008(E) – 3 –

INTERNATIONAL ELECTROTECHNICAL COMMISSION

____________
GUIDELINE FOR SYNCHRONIZATION OF AUDIO AND VIDEO –

Part 1-1: Measurement methods for synchronization

of audio and video equipment and systems –

General
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

The main task of IEC technical committees is to prepare International Standards. In
exceptional circumstances, a technical committee may propose the publication of a technical
specification when
• the required support cannot be obtained for the publication of an International Standard,
despite repeated efforts, or
• the subject is still under technical development, or where, for any other reason, there is
the future but no immediate possibility of an agreement on an International Standard.
Technical specifications are subject to review within three years of publication to decide
whether they can be transformed into International Standards.
IEC 62312-1-1, which is a technical specification, has been prepared by IEC technical
committee 100: Audio, video and multimedia systems and equipment.

– 4 – TS 62312-1-1 © IEC:2008(E)

The text of this technical specification is based on the following documents:

Enquiry draft Report on voting

100/1270/DTS 100/1316/RVC
Full information on the voting for the approval of this technical specification can be found in

the report on voting indicated in the above table.

This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

The list of all the parts of IEC 62312, under the general title Guideline for synchronization of
audio and video, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• transformed into an International standard,
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

TS 62312-1-1 © IEC:2008(E) – 5 –

INTRODUCTION
Audio and video equipment processes or reproduces the input signals of audio and video,

then outputs these signals in various forms. Audio and video equipment needs time to

process or reproduce the input signal. This time depends on the signal format, the

architecture of equipment and the design of equipment. Hence audio and video equipment

may have different output delays for audio and video signals, and this causes unsynchronised

audio and video outputs.
This Technical Specification is the general part of the measurement method for that time

difference between audio and video outputs. The other subparts of IEC/TS 62312-1 describe

specific measurement methods for specific audio and video equipment.

– 6 – TS 62312-1-1 © IEC:2008(E)

GUIDELINE FOR SYNCHRONIZATION OF AUDIO AND VIDEO –

Part 1-1: Measurement methods for synchronization

of audio and video equipment and systems –

General
1 Scope
This part of 62312 gives guidelines for methods of synchronization of audio and video.
This Technical Specification describes general measurement methods for the synchronization
of audio and video equipment.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC/TS 62312-2, Guideline for synchronization of audio and video – Part 2: Methods for
synchronization of audio and video systems
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply. Also the terms
and definitions given in IEC 62312-2 apply.
3.1
EUT
equipment under test
4 Measuring conditions
4.1 General conditions
4.1.1 Power supplies
4.1.1.1 Voltage
The supplied AC power voltage shall be the fixed value of the region where the equipment
under test is used. The supplied DC power voltage shall be the fixed value specified by the
manufacturer. The toleran
...