iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 61300-2-51:2007/COR1:2015

(Corrigendum)

Corrigendum 1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-51: Tests - Fibre optic connector test for transmission with applied tensile load - Singlemode and multimode

Corrigendum 1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-51: Tests - Fibre optic connector test for transmission with applied tensile load - Singlemode and multimode

Corrigendum 1 - Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-51: Essais - Essai des connecteurs à fibres optiques en transmission lorsqu'une charge de traction est appliquée - Unimodal et multimodal

General Information

Status
Published
Publication Date
08-Jan-2015
ICS
33.180.20 - Fibre optic interconnecting devices
Technical Committee
SC 86B - Fibre optic interconnecting devices and passive components
Current Stage
PPUB - Publication issued
Start Date
31-Dec-2014
Completion Date
09-Jan-2015
Ref Project

Relations

Corrects
IEC 61300-2-51:2007 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-51: Tests - Fibre optic connector test for transmission with applied tensile load - Singlemode and multimode
Effective Date
05-Sep-2023

Buy Standard

IEC 61300-2-51:2007/COR1:2015 - Corrigendum 1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-51: Tests - Fibre optic connector test for transmission with applied tensile load - Singlemode and multimode Released:9. 01. 2015IEC 61300-2-51:2007/COR1:2015 - Corrigendum 1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-51: Tests - Fibre optic connector test for transmission with applied tensile load - Singlemode and multimode Released:9. 01. 2015
PreviousNext
Standard
IEC 61300-2-51:2007/COR1:2015 - Corrigendum 1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-51: Tests - Fibre optic connector test for transmission with applied tensile load - Singlemode and multimode Released:9. 01. 2015
English and French language
10 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


 IEC 2015
INTERNATIONAL ELECTROTECHNICAL COMMISSION
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
IEC 61300-2-51 IEC 61300-2-51
Edition 1.0  2007-06 Édition 1.0  2007-06

Fibre optic interconnecting Dispositifs d’interconnexion et
devices and passive components – composants passifs à fibres optiques –
Basic test and measurement procedures – Méthodes fondamentales d’essais et de
mesures –
Part 2-51: Tests –
Fibre optic connector test for Partie 2-51: Essais –
transmission with applied tensile load – Essai des connecteurs à fibres
Singlemode and multimode optiques en transmission lorsqu’une
charge de traction est appliquée –
Unimodal et multimodal
CORRIGENDUM 1
2. Normative references 2. Références normatives
Delete the following existing normative Supprimer la référence normative
reference existante suivante
IEC 61300-3-34, Fibre optic IEC 61300-3-34, Fibre optic
interconnecting devices and passive interconnecting devices and passive
components – Basic test and components – Basic test and
measurement procedures – Part 3-34: measurement procedures – Part 3-34:
Examinations and
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 61300-2-22:2024(Main)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature

IEC 61300-2-22:2024 describes a procedure to determine the suitability of a fibre optic interconnecting device and a passive component to withstand the effects of a change of temperature or a succession of changes of temperature.

  • Standard
    32 pages
    English language
    sale 15% off
  • Standard
    20 pages
    English and French language
    sale 15% off
IEC
IEC 61300-2-34:2024(Main)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests - Resistance to solvents and contaminating fluids

IEC 61300-2-34:2024 is for testing the resistance to solvents and contaminating fluids on fibre optic interconnecting devices, passive components and protective housings, and their functionality.

  • Standard
    36 pages
    English language
    sale 15% off
  • Standard
    22 pages
    English and French language
    sale 15% off
IEC
IEC 61754-13:2024(Main)
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 13: Type FC-PC connector family

IEC 61754-13:2024 defines the standard interface dimensions for the type FC-PC family of connectors. This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) revising normative reference reflecting the latest documents;
b) addition of intermateability in 5.2;
c) changes of dimensions of the plug connector interface in Table 2 and Table 3;
d) addition of Grade Am, Bm and Cm in Table 3.

  • Standard
    50 pages
    English language
    sale 15% off
  • Standard
    29 pages
    English and French language
    sale 15% off
IEC
IEC 61300-2-27:2024(Main)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-27: Tests - Dust (laminar flow)

IEC 61300-2-27:2024 determines the effects of dust on fibre optic interconnecting devices or passive components. This second edition cancels and replaces the first edition published in 1995. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) normative references have been added;
b) the relative humidity requirement during the test has been modified;
c) the procedure description has been modified;
d) Figure 1 showing possible test configurations has been added;
e) the severity of the test has been updated according to the component and performance category;
f) Clause 8 has been added, listing details to be specified and reported.

  • Standard
    21 pages
    English and French language
    sale 15% off
IEC
IEC 61300-1:2022/AMD1:2024(Amendment)
Amendment 1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance

IEC 61300-1: 2024 Amendment 1

  • Standard
    32 pages
    English and French language
    sale 15% off
IEC
IEC 60875-1:2024(Main)
Fibre optic interconnecting devices and passive components - Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification

IEC 60875-1:2024 applies to non-wavelength-selective fibre optic branching devices, all exhibiting the following features:
- they are passive, in that they contain no optoelectronic or other transducing elements;
- they have three or more ports for either the entry or exit, or both, of optical power, and share optical power among these ports in a predetermined fashion;
- the ports are optical fibres, or optical fibre connectors.
This document establishes uniform requirements for the optical, mechanical and environmental properties. This seventh edition cancels and replaces the sixth edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) removal of variant and reference extensions in clause classification
b) removal of specification system in clause documentation
c) removal of interface standards, reliability standards and interlinking in clause standardization system

  • Standard
    54 pages
    English language
    sale 15% off
  • Standard
    29 pages
    English and French language
    sale 15% off
IEC
IEC 61755-3-2:2024(Main)
Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-2: Connector parameters of dispersion unshifted single-mode physically contacting fibres - Angled 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules

IEC 61755-3-2:2024 defines the dimensional limits of the optical interface that are necessary for single-mode fibre optic connectors with 2,5 mm or 1,25 mm diameter cylindrical zirconia (ZrO2) ferrules polished at an 8° angle to meet the specific requirements for fibre-to-fibre interconnection, as defined in IEC 61755-2-2. Ferrules made from the material specified in this standard are suitable for use in all the operating service environments defined in IEC 61753-1. Ferrule dimensions and features are contained in the IEC 61754 series of fibre optic connector interface standards. This second edition cancels and replaces the first edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) normative references have been added;
b) The introduction of an additional optical interface with a different fibre core eccentricity profile. The previous revision of optical interface standard is named "Variant 1: with fibre core axis oriented towards the connector guide key".
The additional optical interface is named "Variant 2: with fibre core axis not oriented towards the connector guide key";
c) statements added related to interoperability, where both variants remain intermateable within a given performance grade and are fully backwards compatible to IEC 61755-3-2:2006;
d) The addition of Grade B and Grade C interface requirements for both variants;
f) The addition of a descriptive statistic for the mean fibre core eccentricity (mean value) to describe the distribution of fibre core eccentricity to ensure interoperability;
g) A new informative Annex B to give guidance on the expected attenuation when mated to a reference connector plug;
h) A new informative Annex D to give guidance related to estimation of mean fibre eccentricity limits for finite production batch sizes.

  • Standard
    47 pages
    English and French language
    sale 15% off
IEC
IEC 61755-3-1:2024(Main)
Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-1: Connector parameters of dispersion unshifted single-mode physically contacting fibres - Non-angled 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules

IEC 61755-3-1:2024 defines the dimensional limits of the optical interface that are necessary for single-mode fibre optic connectors with 2,5 mm or 1,25 mm diameter cylindrical zirconia (ZrO2) ferrules to meet the specific requirements for fibre-to-fibre interconnection, as defined in IEC 61755-2-1. Ferrules made from the material specified in this document are suitable for use in all the operating service environments defined in IEC 61753-1. Ferrule dimensions and features are contained in the IEC 61754 series of fibre optic connector interface standards.
This second edition cancels and replaces the first edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) normative references have been added;
b) the introduction of an additional optical interface with a different fibre core eccentricity profile. The previous revision of optical interface standard is named "Variant 1: with fibre core axis oriented towards the connector guide key". The additional optical interface is named "Variant 2: with fibre core axis not oriented towards the connector guide key";
c) statements added related to interoperability, where both variants remain intermateable within a given performance grade and backwards compatible to IEC 61755-3-1:2006;
d) The addition of Grade B and Grade C interface requirements for both variants;
e) The addition of a descriptive statistic for the mean fibre core eccentricity (mean value) to describe the distribution of fibre core eccentricity to ensure interoperability;
f) A new informative Annex B to give guidance on the expected attenuation when mated to a reference connector plug;
g) A new informative Annex C to give guidance related to the simulation of optical interface attenuation;
h) A new informative Annex D to give guidance related to estimation of mean fibre eccentricity limits for finite production batch sizes.

  • Standard
    49 pages
    English and French language
    sale 15% off
IEC
IEC 63267-2-2:2024(Main)
Fibre optic interconnecting devices and passive components - Connector optical interfaces for enhanced macro bend multimode fibres - Part 2-2: Connection parameters of physically contacting 50 μm core diameter fibres - Non-angled and angled for reference connector applications

IEC 63267-2-2:2024 defines the dimensional limits of an optical interface for reference connections necessary to meet specific requirements for fibre-to-fibre interconnection of non-angled and angled polished multimode reference connectors intended to be used for attenuation measurements in the field or factory. Several grades of reference connections are defined in this document.
The multimode reference connections are terminated to restricted IEC 60793-2-10 A1-OM2b to A1-OM5b fibre at the 850 nm band only.
The geometrical dimensions and tolerances of the specified reference connections have been developed primarily to limit the variation in measured attenuation between multiple sets of two reference connectors, and therefore to limit the variation in measured attenuation between randomly chosen reference connectors when mated with connectors in the field or factory.

  • Standard
    25 pages
    English and French language
    sale 15% off
IEC
IEC 63267-2-1:2024(Main)
Fibre optic interconnecting devices and passive components - Connector optical interfaces for enhanced macro bend multimode fibres - Part 2-1: Connection parameters of physically contacting 50 µm core diameter fibres - Non-angled
SIST IEC 60072-1:2001

IEC 63267-2-1:2024 defines a set of specified conditions for an enhanced macro bend of 50/125 µm, graded index multimode fibre optic connection that is maintained in order to satisfy the requirements of attenuation and return loss performance in a randomly mated pair of polished physically contacting (PC) fibres.
An encircled flux (EF) compliant launch condition in accordance with IEC 61300-1, at an operational wavelength of 850 nm, is used for determination of performance grades, based on lateral fibre core offset, numerical aperture (NA) mismatch, and fibre core diameter (CD) variation.
Fibre core angular offset is considered insignificant given the state-of-the-art and is excluded as a factor for attenuation estimation. Attenuation and return loss performance grades are defined in IEC 63267-1.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    25 pages
    English and French language
    sale 15% off