IEC 61196-1-123:2023

Coaxial communication cables - Part 1-123: Electrical test methods - Test for attenuation constant of radiating cable

IEC 61196-1-123:2023 defines the test method to determine the attenuation constant of radiating coaxial communication cables that are intended for use in wireless communication systems such as tunnels, railways, highways, subways, elevators and other confined areas in which conventional antenna transmission is not satisfactory or even impossible.

General Information

• Status: Published
• Publication Date: 06-Mar-2023
• ICS: 33.120.10 - Coaxial cables. Waveguides
• Technical Committee: SC 46A - Coaxial cables
• Drafting Committee: WG 3 - TC 46/SC 46A/WG 3
• Current Stage: PPUB - Publication issued
• Start Date: 07-Mar-2023
• Completion Date: 17-Mar-2023

Overview

IEC 61196-1-123:2023 is an international standard published by the International Electrotechnical Commission (IEC) that specifies the electrical test methods for determining the attenuation constant of radiating coaxial communication cables. These cables are designed for wireless communication systems in challenging environments-such as tunnels, railways, highways, subways, and elevators-where conventional antenna transmission is unreliable or impossible.

This standard provides a uniform, precise test procedure to assess the electrical performance of radiating cables, ensuring their suitability and reliability in confined and complex structures. It serves as a critical reference for manufacturers, testing laboratories, and system integrators working with coaxial cables in specialized applications.

---

Key Topics

Scope and Purpose

• Defines test methods to measure the attenuation constant of radiating coaxial cables.
• Applies specifically to cables used in environments where wireless signals must be transmitted through confined, obstructed spaces.
• Supports quality assurance and performance verification for radiating cable deployments.

Test Methodology

IEC 61196-1-123 outlines two main measurement methods:

• Free-space method:

  • Cable is laid on non-metallic posts 1.5 m to 2 m high.
  • Measurement either with a Vector Network Analyzer (VNA) or power meter arrangement.
  • Cable length must be at least 50 m or 10 wavelengths of the test frequency, whichever is longer.

• Ground-level method:

  • Cable is placed on non-metallic spacers about 10 cm to 12 cm above concrete floor.
  • Also supports VNA or power meter test setups with similar length requirements.

Measurement Procedures

• Use of a Vector Network Analyzer (VNA) to measure S-parameters and calculate attenuation.
• Use of power meters, an RF continuous wave generator, and power splitters for power measurement techniques.
• Calibration procedures defined to ensure accuracy of the test setup.
• Temperature stabilization and correction methods are provided to normalize attenuation values at a reference temperature of 20 °C.

Data Expression and Reporting

• Attenuation constant is standardized to dB per 100 meters, enabling easy comparison across different cables.
• Temperature corrections use a defined correction factor based on cable materials and insulation type.
• Test reports must include ambient temperature, cable length, and corrected attenuation values.

---

Applications

IEC 61196-1-123:2023 is highly relevant for:

• Wireless communication system designers working in tunnels, subways, and confined transportation infrastructure.
• Manufacturers of radiating coaxial cables aiming to verify product performance and comply with international standards.
• Testing laboratories performing certification or quality assurance of coaxial cables used as radiating cables.
• Infrastructure operators ensuring that communication systems deployed in complex, obstructed environments meet attenuation requirements for reliable signal propagation.

This standard helps optimize system design and installation by providing consistent and reliable test methods to evaluate how radiating cables impact signal attenuation in difficult environments.

---

Related Standards

• IEC 61196-1: Generic specification including general definitions and requirements for coaxial communication cables.
• IEC 61196-4: Sectional specification dedicated to radiating cables, providing detailed construction and performance criteria.
• IEC 61196-1-113:2018: Electrical test methods for attenuation constant, providing complementary test procedures for general coaxial cables.

These related IEC standards collectively form a comprehensive framework for the specification, testing, and application of coaxial cables in communication systems.

---

Keywords: IEC 61196-1-123, radiating coaxial cable test, attenuation constant test, electrical test methods, wireless communication cables, tunnels communication system, coaxial cable standard, attenuation measurement, vector network analyzer, power meter test, cable attenuation correction, coaxial cable quality assurance.

Standards Content (Sample)

IEC 61196-1-123 ®
Edition 1.0 2023-03
INTERNATIONAL
STANDARD
Coaxial communication cables –
Part 1-123: Electrical test methods – Test for attenuation constant of radiating
cable
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Secretariat Tel.: [phone]
3, rue de Varembé [e-mail]
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 19 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc

If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: [e-mail].
IEC 61196-1-123 ®
Edition 1.0 2023-03
INTERNATIONAL
STANDARD
Coaxial communication cables –

Part 1-123: Electrical test methods – Test for attenuation constant of radiating

cable
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.120.10 ISBN 978-2-8322-6463-8

– 2 – IEC 61196-1-123:2023 © IEC 2023
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions and abbreviated terms . 5
3.1 Terms and definitions . 5
3.2 Abbreviated terms . 5
4 Methodology . 5
4.1 General . 5
4.2 Free-space method . 6
4.3 Ground-level method. 6
5 Test procedures . 7
5.1 General . 7
5.2 Equipment . 8
5.3 Calibration . 8
5.4 Measurement . 8
6 Expression of test results . 9
6.1 Expression . 9
6.2 Temperature correction . 9
7 Test report . 9
8 Requirements . 9
Bibliography . 10

Figure 1 – Attenuation constant with free-space method . 6
Figure 2 – Attenuation constant with ground-level method . 7

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
COAXIAL COMMUNICATION CABLES –

Part 1-123: Electrical test methods –
Test for attenuation constant of radiating cable

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall
...