IEC 62841-2-6:2020/COR1:2024

Corrigendum 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers

Corrigendum 1 - Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 2-6 : Exigences particulières pour les marteaux portatifs

General Information

• Status: Published
• Publication Date: 16-Oct-2024
• ICS: 25.140.20 - Electric tools
• Technical Committee: TC 116 - Safety of motor-operated electric tools
• Current Stage: PPUB - Publication issued
• Start Date: 17-Oct-2024
• Completion Date: 26-Nov-2024

Relations

• Corrects: IEC 62841-2-6:2020 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers
• Effective Date: 16-Aug-2024

Standards Content (Sample)

© IEC 2024
INTERNATIONAL ELECTROTECHNICAL COMMISSION
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
IEC 62841-2-6 IEC 62841-2-6
Edition 1.0  2020-07 Édition 1.0  2020-07

ELECTRIC MOTOR-OPERATED HAND-HELD OUTILS ÉLECTROPORTATIFS À MOTEUR,
TOOLS, TRANSPORTABLE TOOLS AND LAWN OUTILS PORTABLES ET MACHINES POUR
AND GARDEN MACHINERY – SAFETY – JARDINS ET PELOUSES – SÉCURITÉ –

Part 2-6: Particular requirements for hand-held Partie 2-6: Exigences particulières pour les
hammers marteaux portatifs
CO RRI G E NDUM 1
Corrections to the French version appear after the English text.
Les corrections à la version française sont données après le texte anglais.

Annex I – Measurement of noise and vibration emissions
Replace the first row of Table I.102, modified by Amendment 1, with the following new text:
Table I.102 – Noise test conditions for rotary hammers
Orientation Drilling vertically down into a concrete block having the formulation specified in Table I.103 and
having the minimum dimensions 500 mm × 500 mm and 200 mm in height and supported on
resilient material. The concrete block, its support and the tool shall be so oriented that
– the geometric centre of the tool is 1 m above the reflecting plane;
– the centre of the concrete block is located under the top microphone "5"; as shown in
Figure I.2 of Part 1; and
– the sides of the concrete block are parallel to the square formed by the microphones "1"
...