Thermoplastics piping systems for non-pressure applications — Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings — Determination of the viscosity number and K-value

ISO 13229:2010 specifies a method for the determination of the viscosity number (also known as reduced viscosity) and K-value of an unplasticized poly(vinyl chloride) (PVC) resin derived from a pipe, fitting or compound. In ISO 13229:2010, only the method for isolation (or separation) of the PVC resin is detailed.

Systèmes de canalisations thermoplastiques pour applications sans pression — Tubes et raccords en poly(chlorure de vinyle) non plastifié (PVC-U) — Détermination de l'indice de viscosité réduite et de la valeur K

L'ISO 13229:2010 spécifie une méthode de détermination de l'indice de viscosité (également appelé «viscosité réduite») et de la valeur K d'une résine de poly(chlorure de vinyle) (PVC) non plastifié prélevée sur un tube, un raccord ou une composition. Dans l'ISO 13229:2010, seule la méthode de séparation de la résine PVC est détaillée.

General Information

Status
Published
Publication Date
07-Mar-2010
Current Stage
9093 - International Standard confirmed
Completion Date
27-Jan-2021
Ref Project

Buy Standard

Standard
ISO 13229:2010
English language
6 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 13229:2010 - Thermoplastics piping systems for non-pressure applications -- Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings -- Determination of the viscosity number and K-value
English language
5 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 13229:2010 - Systemes de canalisations thermoplastiques pour applications sans pression -- Tubes et raccords en poly(chlorure de vinyle) non plastifié (PVC-U) -- Détermination de l'indice de viscosité réduite et de la valeur K
French language
5 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

МЕЖДУНАРОДНЫЙ ISO
СТАНДАРТ 13229
Первое издание
2010-03-15

Системы безнапорные пластичных
трубопроводов.
Непластифицированные
поливинилхлоридные (PVC-U) трубы и
фитинги. Определение числа вязкости
и величины К
Thermoplastics piping systems for non-pressure applications —
Unplasticized poly(vinyl chloride) (ПВХ-U) pipes and fittings —
Determination of viscosity number and K-value



Ответственность за подготовку русской версии несёт GOST R
(Российская Федерация) в соответствии со статьёй 18.1 Устава ISO
Ссылочный номер
ISO 13229:2010(R)
©
ISO 2010

---------------------- Page: 1 ----------------------
ISO 13229:2010(R)
Отказ от ответственности при работе в PDF
Настоящий файл PDF может содержать интегрированные шрифты. В соответствии с условиями лицензирования, принятыми
фирмой Adobe, этот файл можно распечатать или смотреть на экране, но его нельзя изменить, пока не будет получена
лицензия на интегрированные шрифты и они не будут установлены на компьютере, на котором ведется редактирование. В
случае загрузки настоящего файла заинтересованные стороны принимают на себя ответственность за соблюдение
лицензионных условий фирмы Adobe. Центральный секретариат ISO не несет никакой ответственности в этом отношении.
Adobe – торговый знак фирмы Adobe Системаs Incorporated.
Подробности, относящиеся к программным продуктам, использованные для создания настоящего файла PDF, можно найти в
рубрике Общее Info файла; параметры создания PDF были оптимизированы для печати. Были приняты во внимание все
меры предосторожности с тем, чтобы обеспечить пригодность настоящего файла для использования комитетами-членами
ISO. В редких случаях возникновения проблемы, связанной со сказанным выше, просьба проинформировать Центральный
секретариат по адресу, приведенному ниже.


ДОКУМЕНТ ЗАЩИЩЕН АВТОРСКИМ ПРАВОМ

©  ISO 2010
Все права сохраняются. Если не указано иное, никакую часть настоящей публикации нельзя копировать или использовать в
какой-либо форме или каким-либо электронным или механическим способом, включая фотокопии и микрофильмы, без
предварительного письменного согласия ISO, которое должно быть получено после запроса о разрешении, направленного по
адресу, приведенному ниже, или в комитет-член ISO в стране запрашивающей стороны.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Опубликовано в Швейцарии

ii © ISO 2010 – Все права сохраняются

---------------------- Page: 2 ----------------------
ISO 13229:2010(R)
Предисловие
Международная организация по стандартизации (ISO) является всемирной федерацией,
объединяющей национальные органы по стандартизации (комитеты-члены ISO). Разработка
международных стандартов, как правило, ведется в технических комитетах ISO. Каждый комитет-член,
заинтересованной в разработке теме, ради которой был образован данный технический комитет,
имеет право быть представленным в этом комитете. Международные организации, правительственные
и неправительственные, поддерживающие связь с ISO, также принимают участие в ее работе. ISO
тесно сотрудничает с Международной электротехнической комиссией (IEC) по всем вопросам
стандартизации в области электротехники.
Международные стандарты разрабатываются в соответствии с правилами, приведенными в Части 2
Директив ISO/IEC.
Основное назначение технических комитетов заключается в разработке Международных стандартов.
Проекты международных стандартов, принятые техническими комитетами, рассылаются комитетам-
членам на голосование. Для опубликования международного стандарта требуется собрать не менее
75 % положительных голосов комитетов-членов, принявших участие в голосовании.
Обращается внимание на вероятность того, что некоторые элементы настоящего документа могут
быть предметов патентных прав. ISO не несет ответственность за идентификацию части или всех
подобных прав.
ISO 13229 разработан Техническим комитетом ISO/TC 138, Трубы, фитинги и вентили из пластмасс
для транспортировки жидкостей, Подкомитетом SC 1, Трубы и фитинги из пластмасс для
канализации, стока и дренажа, включая почвенный дренаж.

© ISO 2010 – Все права сохраняются iii

---------------------- Page: 3 ----------------------
МЕЖДУНАРОДНЫЙ СТАНДАРТ ISO 13229:2010(R)

Системы безнапорные пластичных трубопроводов.
Непластифицированные поливинилхлоридные (PVC-U)
трубы и фитинги. Определение числа вязкости и величины
К
1 Область применения
Настоящий международный стандарт устанавливает метод определения коэффициента вязкости
(также известной как приведенная вязкость) и числа K непластифицированной поливинилхлоридной
(ПВХ) смолы, выделенной из трубы, фитинга или соединения.
В настоящем международном стандарте рассмотрен только метод отделения (или разделения) ПВХ
смолы, тогда как определение коэффициента вязкости приводится в ISO 1628-2.
Присутствие других присадок или полимеров может сделать недействительным настоящий метод (см.
Раздел 3).
2 Нормативные ссылки
Нижеследующие документы обязательны для применения настоящего документа. В отношении
датированных ссылок действительны только указанные издания. В отношении недатированных ссылок
применимо последнее издание упоминаемого документа, включая любые к нему изменения.
ISO 1628-2, Пластмассы. Определение вязкости полимеров в разбавленном растворе с
использованием капиллярных вискозиметров. Часть 2. Поливинилхлоридные смолы
3 Сущность метода
ПВХ смола, содержащаяся в образце, взятом от трубы, фитинга или соединения, отделяется от
большинства присадок путем растворения в тетрагидрофуране (ТГФ) и осаждения метанолом из части
раствора, который был изолирован посредством центрифугирования
...

INTERNATIONAL ISO
STANDARD 13229
First edition
2010-03-15

Thermoplastics piping systems for
non-pressure applications —
Unplasticized poly(vinyl chloride) (PVC-U)
pipes and fittings — Determination
of the viscosity number and K-value
Systèmes de canalisations thermoplastiques pour applications
sans pression — Tubes et raccords en poly(chlorure de vinyle)
non plastifié (PVC-U) — Détermination de l'indice de viscosité réduite
et de la valeur K




Reference number
ISO 13229:2010(E)
©
ISO 2010

---------------------- Page: 1 ----------------------
ISO 13229:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2010 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 13229:2010(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 13229 was prepared by Technical Committee ISO/TC 138, Plastics pipes, fittings and valves for the
transport of fluids, Subcommittee SC 1, Plastics pipes and fittings for soil, waste and drainage (including land
drainage).

© ISO 2010 – All rights reserved iii

---------------------- Page: 3 ----------------------
INTERNATIONAL STANDARD ISO 13229:2010(E)

Thermoplastics piping systems for non-pressure
applications — Unplasticized poly(vinyl chloride) (PVC-U)
pipes and fittings — Determination of the viscosity number
and K-value
1 Scope
This International Standard specifies a method for the determination of the viscosity number (also known as
reduced viscosity) and K-value of an unplasticized poly(vinyl chloride) (PVC) resin derived from a pipe, fitting
or compound.
In this International Standard, only the method for isolation (or separation) of the PVC resin is detailed, while
the determination of the viscosity number is given in ISO 1628-2.
The presence of other additives or polymers can invalidate this method (see Clause 3).
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 1628-2, Plastics — Determination of the viscosity of polymers in dilute solution using capillary
viscometers — Part 2: Poly(vinyl chloride) resins
3 Principle
A PVC resin, contained in a sample taken from a pipe, a fitting or a compound, is separated from most
additives by dissolution in tetrahydrofuran (THF) and precipitation by methanol from a portion of the solution
that has been isolated by centrifuging and decantation. The presence of additives in injection-moulding
compounds can affect the results for materials for/from injection-moulded fitting
...

NORME ISO
INTERNATIONALE 13229
Première édition
2010-03-15


Systèmes de canalisations
thermoplastiques pour applications sans
pression — Tubes et raccords en
poly(chlorure de vinyle) non plastifié
(PVC-U) — Détermination de l'indice
de viscosité réduite et de la valeur K
Thermoplastics piping systems for non-pressure applications —
Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings —
Determination of the viscosity number and K-value




Numéro de référence
ISO 13229:2010(F)
©
ISO 2010

---------------------- Page: 1 ----------------------
ISO 13229:2010(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.


DOCUMENT PROTÉGÉ PAR COPYRIGHT


©  ISO 2010
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse

ii © ISO 2010 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 13229:2010(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne
pas avoir identifié de tels droits de propriété et averti de leur existence.
L'ISO 13229 a été élaborée par le comité technique ISO/TC 138, Tubes, raccords et robinetterie en matières
plastiques pour le transport des fluides, sous-comité SC 1, Tubes et raccords en matières plastiques pour
évacuation et assainissement (y compris le drainage des sols).

© ISO 2010 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
NORME INTERNATIONALE ISO 13229:2010(F)

Systèmes de canalisations thermoplastiques pour applications
sans pression — Tubes et raccords en poly(chlorure de vinyle)
non plastifié (PVC-U) — Détermination de l'indice de viscosité
réduite et de la valeur K
1 Domaine d'application
La présente Norme internationale spécifie une méthode de détermination de l'indice de viscosité (également
appelé «viscosité réduite») et de la valeur K d'une résine de poly(chlorure de vinyle) (PVC) non plastifié
prélevée sur un tube, un raccord ou une composition.
Dans la présente Norme internationale, seule la méthode de séparation de la résine PVC est détaillée alors
que la détermination de l'indice de viscosité est donnée dans l'ISO 1628-2.
La présence d'autres additifs ou d'autres polymères peut invalider cette méthode (voir Article 3).
2 Références normatives
Les documents de référence suivants sont indispensables pour l'application du présent document. Pour les
références datées, seule l'édition citée s'applique. Pour les références non datées, la dernière édition du
document de référence s'applique (y compris les éventuels amendements).
ISO 1628-2, Plastiques — Détermination de la viscosité des polymères en solution diluée à l'aide de
viscosimètres à capillaires — Partie 2: Résines de poly(chlorure de vinyle)
3 Principe
Une résine PVC, contenue dans un prélèvement effectué sur un tube, sur un raccord ou dans une
composition, est séparée de la plupart des additifs par dissolution dans le tétrahydrofurane (THF) puis par
précipitation par addition de méthanol dans une fra
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.