ISO 18642:2016

Fertilizer and soil conditioners — Fertilizer grade urea — General requirements

ISO 18642:2016 specifies the general requirements regarding testing methods, sampling and preparation of test sample, marking and labelling, package, transport, and storage of fertilizer grade urea. It is applicable to urea in solid form, e.g. granular, prilled, or pastilled, which is made by the reaction of ammonia with carbon dioxide. Urea can be classified by its intended use, industrial and/or agricultural. It is mainly used as fertilizer in the field of agriculture. It is only applicable to fertilizer grade urea in the field of agriculture.

Matières fertilisantes — Engrais à l'urée — Exigences générales

General Information

• Status: Published
• Publication Date: 06-Jul-2016
• ICS: 65.080 - Fertilizers
• Technical Committee: ISO/TC 134 - Fertilizers, soil conditioners and beneficial substances
• Drafting Committee: ISO/TC 134/WG 1 - Fertilizers
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 18-May-2022

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 18642
First edition
2016-07-15
Fertilizer and soil conditioners —
Fertilizer grade urea — General
requirements
Matières fertilisantes — Engrais à l’urée — Exigences générales
Reference number
ISO 18642:2016(E)
©
ISO 2016

---------------------- Page: 1 ----------------------
ISO 18642:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 18642:2016(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirement . 2
5 Testing methods . 2
6 Sampling and preparation of test sample . 3
7 Marking and labelling . 3
8 Package, transport, and storage . 4
Bibliography . 5
© ISO 2016 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 18642:2016(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment,
as well as information about ISO’s adherence to the World Trade Organization (WTO) principles in the
Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html
The committee responsible for this document is ISO/TC 134, Fertilizers and soil conditioners.
iv © ISO 2016 – All rights reserved

---------------------- Page: 4 ----------------------
ISO 18642:2016(E)

Introduction
Urea, also known as carbamide, is the world’s most widely used nitrogen fertilizer product. The
production of urea globally has reached 198 million tons and the volume of global trade has reached
45 million tons in the year 2013. About 85 % of the world’s production of urea is destined for use as a
nitrogen-release fertilizer. Urea has the highest nitrogen content of all solid nitrogenous fertilizers in
common use. The standard crop-nutrient rating of urea is 46-0-0.
For facilitating international fertilizer trade, it is necessary to have an international and general
standard for fertilizer grade urea.
© ISO 2016 – All rights reserved v

---------------------- Page: 5 ----------------------
INTERNATIONAL STANDARD ISO 18642:2016(E)
Fertilizer and soil conditioners — Fertilizer grade urea —
General requirements
1 Scope
This International Standard specifies the general requirements regarding testing methods, sampling
and preparation of test sample, marking and labelling, package, transport, and storage of fertilizer
grade urea.
This International Standard is applicable to urea in solid form, e.g. granular, prilled, or pastilled, which
is made by the reaction of ammonia with carbon dioxide. Urea can be classified by its intended use,
industrial and/or agricultural. It is mainly used as fertilizer in the field of agriculture. This International
Standard is only applicable to fertilizer grade urea in the field of agriculture.
2 Normative references
The following documents, in whole
...