ISO/IEC ISP 10609-37:1995

Information technology — International Standardized Profiles TB, TC, TD and TE — Connection-mode Transport Service over connection-mode Network Service — Part 37: Definition of profile TC43212

Defines the Profile TC43212. The TC43212 profile is in the TC group which supports Transport protocol classes 0 and 2.

Technologies de l'information — Profils normalisés internationaux TB, TC, TD et TE — Service de transport en mode connexion sur service de réseau en mode connexion — Partie 37: Définition du profil TC43212

General Information

• Status: Withdrawn
• Publication Date: 26-Dec-1995
• Withdrawal Date: 26-Dec-1995
• ICS: 35.100.05 - Multilayer applications
• Technical Committee: ISO/IEC JTC 1 - Information technology
• Drafting Committee: ISO/IEC JTC 1 - Information technology
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 19-May-2009

Relations

• Consolidated By: ISO 19906:2010 - Petroleum and natural gas industries — Arctic offshore structures
• Effective Date: 06-Jun-2022

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARDIZED
ISP
PROFILE
10609-37
First edition
1995-12-15
Information technology - International
Standardized Profiles TB, TC, TD and
TE - Connection-mode Transport Service
over connection-mode Network Service -
Part 37:
Definition of Profile TC4321 2
Technologies de I ’informa tion - Profils normaMs interna tionaux TB, TC,
TD et TE - Service de transport en mode connexion sur Service de
r&eau en mode connexion -
Partie 37: Dkfinition du Profil TC43212
Reference number
ISO/IEC ISP 10609-37:1995(E)

---------------------- Page: 1 ----------------------
ISO/lEC ISP 10609=37:1995(E)
Page
Contents
. . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .~. Ill
Foreword
. . . . . . . . . . .0. “. “. vii
Introduction
1
Scope . . . . . . . . . . . . . . . . . . . . .~.~.~.~.
Normative references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .~.~.~.~. 3
Definitions . .~.~.~. 4
4
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . “.
Profile TC4321 2 . . . . . . . . . . . . . . . . . . . . . . “. ‘. ”.~. 4
5.1 Subnetwork-type independent requirements . . . . . . . . . . . . . . . . . . .s.m. 4
5.2 Subnetwork-type dependent requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
0 ISO/IEC 1995
All rights resetved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronie or mechanical, including photocopying and microfilm, without Permission in writing from
the publisher.
ISO/IEC Copyright Office l Case postale 56 l CH-1 211 Geneve l Switzerland
Printed in Switzerland
ii

---------------------- Page: 2 ----------------------
0 ISOAEC ISOhEC ISP 10609=37:1995(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International
Electrotechnical Commission) form the specialized System for worldwide
standardization. National bodies that are members of ISO or IEC participate in the
development of International Standards through technical committees established by
the respective organization to deal with particular fields of technical activity. ISO and
IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also
take part in the work.
In the field of information technology, ISO and IEC have established a joint technical
committee, ISO/IEC JTC 1. In addition to developing International Standards, ISO/IEC
JTC 1 has created a Special Group on Functional Standardization for the processing of
International Standardized Profiles.
An International Standardized Profile is an internationally agreed, harmonized
document which identifies a Standard or group of Standards, together with Options and
Parameters, necessary to accomplish a function or set of functions.
Draft International Standardized Profiles are circulated to national bodies for voting.
Publication as an International Standardized Profile requires approval by at least 75%
of the national bodies casting a vote.
International Standardized Profile ISO/IEC ISP 10609-37 was prepared with the
collaboration of
- Asia-Oceania Workshop (AOW);
- European Workshop for Open Systems (EWOS);
- Open Systems Environment Implementors’ Workshop (OIW).
ISO/IEC ISP 10609 consists of the following Parts, under the general title Information
technology - International Standardized Profiles TB, TC, TD and TE - Connection-
mode Transport Service over connection-mode Network Service:
Part 1: Subnetwork-type independent requirements for Group TB
Part 2: Subnetwork-type independent requirements for Group TC
Part 3: Subnetwork-type independent requirements for Group TD
Part 4: Subnetwork-type independent requirements for Group TE

---------------------- Page: 3 ----------------------
ISO/IECISP 10609=37:1995(E) 0 ISOAEC
Part 5: Definition of profiles TB 111 l/TB 1121
Patt 6: Definition of profies TC1 1 1 lITCl121
Part 7: Definition of profiles TDI 11 VTD 1121
Part 8: Definition of profies TE Ill UTE 1121
Part 9: Subnetwork-type dependent requirements for Network Layer, Data
Link Layer and Physical Layer concerning permanent access to a packet
switched data network using virtual calls
Part IO: LAN subnetwork-dependent, media-independent requirements
Part 11: CSMA/CD LAN subnetwork-dependent, media-dependent
requirements
Part 12: Definition of Profile TC51, Provision of the OSI connection-mode
Transport Sen/ice using the OSI connection-mode Network Service in an
End System attached to a CSMAKD LAN
Part 14: Definition of Profile TC53, Provision of the OSI connection-mode
Transport Service using the OSI connection-mode Network Service in an
End System attached to a Token Ring LAN
Part 15: Definition of Profile TC54, Provision of the OSI connection-mode
Transport Service using the OSI connection-mode Network Service in an
End System attached to an FDDI LAN
Part 20: Overview of the generalized multi-part ISP structure for TC and TD
Group profiles for OSI usage of ISDN
Part 21: Subnetwork-type dependent requirements for Network Layer and
Data Link Layer for ISDN B-channel X.25 DTE to DTE Operation
Part 22: Subnetwork-type dependent requirements for Network Layer and
Data Link Layer for ISDN B-channel X.25 DTE to DCE Operation
Part 23: Subnetwork-type dependent requirements for Network Layer and
Data Link Layer for Data Transfer concerning a packet switched mode
Integrated Services Digital Network using virtual calls: B-channel access
case
IV

---------------------- Page: 4 ----------------------
0 ISOAEC ISO/IEC ISP 10609=37:1995(E)
Part 24: Subnetwork-type dependent requirements for Network Layer and
Data Link Layer for Data Transfer concerning a packet switched mode
Integrated Services Digital Network using virfual calls: D-channel access
case
Part 25: Subnetwork-type dependent requirements for Q.93 1 circuit-
switched Operation
Pan 26: Subnetwork-type dependent requirements for Network Layer for
Cal/ Control procedures concerning the outgoing cal1 of a packet switched
mode Integrated Services Digital Network in case B using virtual calls
Part 27: Subnetwork-type dependent requirements for Network Layer for
Ca11 Control procedures concerning the incoming call of a packet switched
mode Integrated Services Digital Network in case B using virtual calls
Part 28: Subnetwork-type dependent requirements for Data Link Layer for
end Systems attached to an ISDN subnetwork
Part 30: Definition of Profile TC1 13 1
Pan 3 1: Definition of Profile TC 123 1
Part 32: Definition of Profile TC4 Ill
Part 33: Definition of Profile TC421 1
Pan 34: Definition of Profile TC43 Ill
Part 35: Definition of Profile TC431 12
Pan 36: Definition of Profile TC4321 1
Part 37: Definition of Profile TC43212
Part 38: Definition of Profile TC4331
Part 40: Definition of Profile TDI 131
Part 4 1: Definition of Profile TD 123 1
Part 42: Definition of Profile TD4 Ill
Patf 43: Definition of Profile TD4211

---------------------- Page: 5 ----------------------
ISO/lEC ISP 10609=37:1995(E)
0 ISOAEC
Part 44: Definition of Profile TD43 Ill
Part 45: Definition of Profile TD43112
Part 46: Definition sf Profile TD43211
Part 47: Definition of Profile TD432 12
Part 48: Definition of Profile TD433 1

---------------------- Page: 6 ----------------------
0 ISO/IEC ISO/IEC ISP 10609=37:1995(E)
Introduction
This International Standardized Profile (BP) is defined in accordance with the
principles specified by ISO/IEC Technical Report 10000, “Information Technology -
Framework and taxonomy sf International Standardized Profiles ”.
The context of Functional Standardization is one area in the Overall field of Infor-
mation Technology (IT) standardization activities, covering base Standards, profiles,
and registration mechanisms. A Profile defines a combination of base Standards that
collectively perform a specific weil-defined IT function. Profiles standardize the use of
Options and other variations in the base Standards, and provide a basis for the
development of uniform, internationally recognized System tests.
ISPs are produced not simply to ‘legitimize’ a particular choice of base Standards and
Options, but to promote real System interoperability. One of the most important roles
for an ISP is to serve as the basis for the development (by organizations oth
...