ISO 5528:2023

Ships and marine technology — Deep-sea hydraulic winch equipment

This document specifies requirements for the design, manufacture, operation, safety, performance, acceptance tests and designation system of deep-sea hydraulic winch equipment (hereafter referred to as “winch equipment”). The deep-sea hydraulic winch equipment are intended to be used for large load deep-sea operations in depths of 3 000 m to 11 000 m.

Titre manque

General Information

• Status: Published
• Publication Date: 02-May-2023
• ICS: 47.020.50 - Deck equipment and installations
• Technical Committee: ISO/TC 8/SC 4 - Outfitting and deck machinery
• Drafting Committee: ISO/TC 8/SC 4 - Outfitting and deck machinery
• Current Stage: 6060 - International Standard published
• Start Date: 03-May-2023
• Due Date: 14-Oct-2023
• Completion Date: 03-May-2023

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 5528
First edition
2023-05
Ships and marine technology — Deep-
sea hydraulic winch equipment
Reference number
ISO 5528:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 5528:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 5528:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Design and operation . 3
4.1 Composition . 3
4.2 Types . 3
4.3 General design requirements . 3
4.4 Strength requirements . 4
4.5 Traction winch . 4
4.6 Cable spooling device . 4
4.7 Cable storage winch . 5
4.8 Control system . 5
5 Performance parameters and requirements . 5
5.1 Preferred numbers of working load . 5
5.2 Nominal speed . 5
5.3 Pressure . 5
5.4 Sealing . 6
5.5 No-load . . 6
5.6 Load . 6
5.7 Overload . 6
5.8 Braking . 6
6 Acceptance tests .6
6.1 General . 6
6.2 Type test . 6
6.2.1 Pressure test . 6
6.2.2 Sealing test . 6
6.2.3 No-load test . 6
6.2.4 Load test . 7
6.2.5 Overload test . 7
6.2.6 Braking test . 7
6.3 Delivery test . 7
6.3.1 No-load test . 7
6.3.2 Load test . 7
6.3.3 Overload test . 7
6.3.4 Braking test . . 7
7 Designation system . 7
7.1 Designation of product type . 7
7.2 Product marking . 8
iii
© ISO 2023 – All rights reserved

---------------------- Page: 3 ----------------------
ISO 5528:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use
of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed
patent rights in respect thereof. As of the date of publication of this document, ISO had not received
notice of (a) patent(s) which may be required to implement this document. However, implementers are
cautioned that this may not represent the latest information, which may be obtained from the patent
database available at www.iso.org/patents. ISO shall not be held responsible for identifying any or all
such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 8, Ships and marine technology,
Subcommittee SC 4, Outfitting and deck machinery.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
  © ISO 2023 – All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 5528:2023(E)
Ships and marine technology — Deep-sea hydraulic winch
equipment
1 Scope
This document specifies requirements for the design, manufacture, operation, safety, performance,
acceptance tests and designation system of deep-sea hydraulic winch equipment (hereafter referred to
as “winch equipment”).
The deep-sea hydraulic winch equipment are intended to be used for large load deep-sea operations in
depths of 3 000 m to 11 000 m.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 780, Packaging — Distribution packaging — Graphical symbols for handling and storage of packages
ISO 3154, Stranded wire ropes for mine hoisting — Technical delivery requirements
ISO 3828, Shipbuilding and marine structures — Deck machinery — Vocabulary and symbols
ISO 4406, Hydraulic fluid power — Fluids — Method for coding the level of contamination by solid particles
ISO 4413, Hydraulic fluid power — General rules and safety requirements for systems and their components
ISO 7825, Shipbuilding — Deck machinery — General requirements
IEC 60529:2013, Degrees of protection provide by enclosure (IP code)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 3828 and the following apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electrope
...

DRAFT INTERNATIONAL STANDARD
ISO/DIS 5528
ISO/TC 8/SC 4 Secretariat: SAC
Voting begins on: Voting terminates on:
2022-06-27 2022-09-19
Ships and marine technology — Deep-sea hydraulic winch
equipments
ICS: 47.020.50
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
This document is circulated as received from the committee secretariat.
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 5528:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 1 ----------------------
ISO/DIS 5528:2022(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 5528
ISO/TC 8/SC 4 Secretariat: SAC
Voting begins on: Voting terminates on:

Ships and marine technology — Deep-sea hydraulic winch
equipments
ICS: 47.020.50
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
THEREFORE SUBJECT TO CHANGE AND MAY
This document is circulated as received from the committee secretariat.
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 5528:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2022 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 2 ----------------------
ISO/DIS 5528:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Design and operation . 3
4.1 Composition . 3
4.2 Types . 3
4.3 General design requirements . 3
4.4 Strength requirements . 4
4.5 Traction winch . 4
4.6 Cable spooling device . 4
4.7 Cable storage winch . 5
4.8 Control system . 5
5 Performance parameters and requirements . 5
5.1 Preferred numbers of working load . 5
5.2 Nominal speed . 5
5.3 Pressure . 5
5.4 Sealing . 6
5.5 No-load . . 6
5.6 Load . 6
5.7 Overload . 6
5.8 Braking . 6
6 Acceptance tests .6
6.1 General . 6
6.2 Type test . 6
6.2.1 Pressure test . 6
6.2.2 Sealing test . 6
6.2.3 No-load test . 7
6.2.4 Load test . 7
6.2.5 Overload test . 7
6.2.6 Braking test . 7
6.3 Delivery test . 7
6.3.1 No-load test . 7
6.3.2 Load test . 7
6.3.3 Overload test . 7
6.3.4 Braking test . . 7
7 Designation system . 8
7.1 Designation of product type . 8
7.2 Product marking . 8
iii
© ISO 2022 – All rights reserved

---------------------- Page: 3 ----------------------
ISO/DIS 5528:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee 8, Ships and marine technology, Subcommittee 4,
Outfitting and deck machinery.
iv
  © ISO 2022 – All rights reserved

---------------------- Page: 4 ----------------------
DRAFT INTERNATIONAL STANDARD ISO/DIS 5528:2022(E)
Ships and marine technology — Deep-sea hydraulic winch
equipments
1 Scope
This document specifies requirements for the design, operation, safety, performance, acceptance tests
and designation system of deep-sea hydraulic winch equipments (hereafter referred to as “winch
equipments”).
This document is applicable to the design, manufacture and acceptance of deep-sea hydraulic winch
equipments. The deep-sea hydraulic winch equipments are intended to be used underwater 3000m ~
11000m for large load deep-sea operations.
2 Normative references
The following documents, in whole or in part, are normatively referred in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
ISO 780, Packaging — Distribution packaging — Graphical symbols for h
...