iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 9276-1:1998/Cor 1:2004

(Corrigendum)

Representation of results of particle size analysis — Part 1: Graphical representation — Technical Corrigendum 1

Representation of results of particle size analysis — Part 1: Graphical representation — Technical Corrigendum 1

Représentation de données obtenues par analyse granulométrique — Partie 1: Représentation graphique — Rectificatif technique 1

Predstavitev podatkov, dobljenih z granulometrijsko analizo – 1. del: Grafični prikaz rezultatov – Tehnični popravek 1

General Information

Status
Published
Publication Date
20-Jan-2004
ICS
19.120 - Particle size analysis. Sieving
Technical Committee
ISO/TC 24/SC 4 - Particle characterization
Drafting Committee
ISO/TC 24/SC 4/WG 1 - Representation of analysis data
Current Stage
6060 - International Standard published
Completion Date
21-Jan-2004
Ref Project
SIST ISO 9276-1:2000/TC 1:2005 - Representation of results of particle size analysis - Part 1: Graphical representation - Technical Corrigendum 1

Relations

Child
ISO 9276-1:1998 - Representation of results of particle size analysis — Part 1: Graphical representation
Effective Date
15-Apr-2008
Child
SIST ISO 9276-1:2000 - Representation of results of particle size analysis -- Part 1: Graphical representation
Effective Date
12-May-2008
Corrects
ISO 9276-1:1998 - Representation of results of particle size analysis — Part 1: Graphical representation
Effective Date
06-Jun-2022

Buy Standard

ISO 9276-1:2000/TC 1:2005ISO 9276-1:2000/TC 1:2005
PreviousNext
Corrigendum
ISO 9276-1:2000/TC 1:2005
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Representation of results of particle size analysis - Part 1: Graphical representation - Technical Corrigendum 119.120Analiza velikosti delcev. SejanjeParticle size analysis. SievingICS:Ta slovenski standard je istoveten z:ISO 9276-1:1998/Cor 1:2004SIST ISO 9276-1:2000/TC 1:2005en01-november-2005SIST ISO 9276-1:2000/TC 1:2005SLOVENSKI
STANDARD



SIST ISO 9276-1:2000/TC 1:2005



ICS
19.120 Ref. No. ISO 9276-1:1998/Cor.1:2004(E)© ISO 2004 – All rights reserved Published in Switzerland
INTERNATIONAL STANDARD ISO 9276-1:1998 TECHNICAL CORRIGENDUM 1 Published 2004-02-01 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION •
• ORGANISATION INTERNATIONALE DE NORMALISATION
Representation of results of particle size analysis — Part 1: Graphical representation TECHNICAL CORRIGENDUM 1 Représentation de données obtenues par analyse granulométrique — Partie 1: Représentation graphique RECTIFICATIF TECHNIQ
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 23484:2023(Main)
Determination of particle concentration by small-angle X-ray scattering (SAXS)

This document deals with the application of small-angle X-ray scattering (SAXS) for the measurement of the particle concentration in suspensions. In this document, only the concentration of sufficiently monodisperse spherical particles is treated, which means that the width of the size distribution is typically below about 50 % of the mean diameter. Here, the differential scattering cross section can be calculated based on the form factor, which depends only on the momentum transfer q and the particle radius r. Furthermore, this document is limited to dilute systems. A dilute system in the sense of SAXS means that particle interactions are absent. In case of long-range interactions (Coulomb forces between the particles), special care needs to be taken and a reduction of the concentration can be necessary.

  • Standard
    14 pages
    English language
    sale 15% off
  • Draft
    14 pages
    English language
    sale 15% off
  • Draft
    14 pages
    English language
    sale 15% off
ISO
ISO 21501-4:2018/Amd 1:2023(Amendment)
Determination of particle size distribution — Single particle light interaction methods — Part 4: Light scattering airborne particle counter for clean spaces — Amendment 1
  • Standard
    10 pages
    English language
    sale 15% off
ISO
ISO 9277:2022(Main)
Determination of the specific surface area of solids by gas adsorption — BET method

This document specifies the determination of the overall specific external and internal surface area of either disperse (e.g. nano-powders) or porous, solids by measuring the amount of physically adsorbed gas according to the method of Brunauer, Emmett and Teller method,[1] based on the 2015 International Union for Pure and Applied Chemistry (IUPAC) recommendations[3]. NOTE For solids exhibiting a chemically heterogeneous surface, for example, metal-carrying catalyst, the BET method gives the overall surface area, whereas the metallic portion of the surface area can be measured by chemisorption methods.

  • Standard
    22 pages
    English language
    sale 15% off
ISO
ISO 20998-2:2022(Main)
Measurement and characterization of particles by acoustic methods — Part 2: Linear theory

This document specifies requirements for ultrasonic attenuation spectroscopy methods for determining the size distributions of a particulate phase dispersed in a liquid at dilute concentrations, where the ultrasonic attenuation spectrum is a linear function of the particle volume fraction. In this regime particle-particle interactions are negligible. Colloids, dilute dispersions, and emulsions are within the scope of this document. The typical particle size for such analysis ranges from 10 nm to 3 mm, although particles outside this range have also been successfully measured. For solid particles in suspension, size measurements can be made at concentrations typically ranging from 0,1 % by volume up to 5 % by volume, depending on the density contrast between the solid and liquid phases, the particle size, and the frequency range[9],[10]. For emulsions, measurements can be made at much higher concentrations. These ultrasonic methods can be used to monitor dynamic changes in the size distribution.

  • Standard
    33 pages
    English language
    sale 15% off
ISO
ISO 26824:2022(Main)
Particle characterization of particulate systems — Vocabulary

This document defines terms that are relevant to the characterization of particles and particulate systems. This document includes such fields as the representation of results of particle size analysis, the descriptive and quantitative representation of particle shape and morphology, sample preparation, specific surface area and porosity characterization and such measurement methods as sedimentation, classification, acoustic methods, laser diffraction, dynamic light scattering, single particle light interaction methods, differential electrical mobility analysis, image analysis and others in a size scale from nanometre to millimetre.

  • Standard
    59 pages
    English language
    sale 15% off
ISO
ISO/TS 4807:2022(Main)
Reference materials for particle size measurement — Specification of requirements

This document is intended to support users of reference materials (RMs) for particle size analysis to identify suitable RMs (certified or not) for their needs. In line with the focus on users, questions on sample preparation that go beyond preparation of the sample as received by the user will not be covered by this document. This document describes the fundamental requirements that RMs (certified or not) for the determination of particle size shall fulfil in order to be fit for a given purpose. The document is limited to a description of the fundamental principles – the discussion whether a certain numerical value is fit for purpose is beyond the scope of this document. The scope of this document is limited to RMs (certified or not) in the form of particles. This document does not deal with any other form of RMs, like calibration grids.

  • Technical specification
    24 pages
    English language
    sale 15% off
ISO
ISO 20804:2022(Main)
Determination of the specific surface area of porous and particulate systems by small-angle X-ray scattering (SAXS)

This document specifies the application of small-angle X-ray scattering (SAXS) for the determination of specific surface area. Both the mass specific surface area in the order of 1 m2g-1 to 2 000 m2g-1 and the volume specific surface areas in the range from 0,01 m2cm-3 to 1 000 m2cm-3 can be obtained. The method described is applicable to dilute and concentrated systems. NOTE: In ISO 17867:2020, the determination of the particle size by SAXS is limited to dilute systems. The determination of surfaces with SAXS is straightforward for two-phase systems only. Surface determination in systems with more than two phases is beyond the scope of this document. The term ‘surface’ refers to any interface between domains of different density (more precisely: electron density) and is not restricted to the external surface of particles. As any interfaces between areas with different electron density, not only to air or vacuum, can be probed, the method can be applied to any heterogeneous system. SAXS measures not only the specific surface area of open pores but also of inaccessible, closed pores or inclusions. NOTE: This is in contrast to gas sorption methods which are described in ISO 9277:2010. In addition to porous systems, there can be contributions of internal interfaces to the measured specific surface area of any heterogeneous compact solid system, such as between crystalline and amorphous phases, provided there is an electron density contrast. Although materials comprising micropores (pore width

  • Standard
    22 pages
    English language
    sale 15% off
  • Draft
    22 pages
    English language
    sale 15% off
ISO
ISO 15901-2:2022(Main)
Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption — Part 2: Analysis of nanopores by gas adsorption

This document describes a method for the evaluation of porosity and pore size distribution by physical adsorption (or physisorption). The method is limited to the determination of the quantity of a gas adsorbed per unit mass of sample as a function of pressure at a controlled, constant temperature[1]-[9]. Commonly used adsorptive gases for physical adsorption characterization include nitrogen, argon, krypton at the temperatures of liquid nitrogen and argon (77 K and 87 K respectively) as well as CO2 (at 273 K). Traditionally, nitrogen and argon adsorption at 77 K and 87 K, respectively, allows one to assess pores in the approximate range of widths 0,45 nm to 50 nm, although improvements in temperature control and pressure measurement allow larger pore widths to be evaluated. CO2 adsorption at 273 K – 293 K can be applied for the microporous carbon materials exhibiting ultramicropores. Krypton adsorption at 77 K and 87 K is used to determine the surface area or porosity of materials with small surface area or for the analysis of thin porous films. The method described is suitable for a wide range of porous materials. This document focuses on the determination of pore size distribution from as low as 0,4 nm up to approximately 100 nm. The determination of surface area is described in ISO 9277. The procedures which have been devised for the determination of the amount of gas adsorbed may be divided into two groups: — those which depend on the measurement of the amount of gas removed from the gas phase, i.e. manometric (volumetric) methods; — those which involve the measurement of the uptake of the gas by the adsorbent (i.e. direct determination of increase in mass by gravimetric methods). In practice, static or dynamic techniques can be used to determine the amount of gas adsorbed. However, the static manometric method is generally considered the most suitable technique for undertaking physisorption measurements with nitrogen, argon and krypton at cryogenic temperatures (i.e. 77 K and 87 K, the boiling temperature of nitrogen and argon, respectively) with the goal of obtaining pore volume and pore size information. This document focuses only on the application of the manometric method.

  • Standard
    29 pages
    English language
    sale 15% off
  • Draft
    29 pages
    English language
    sale 15% off
ISO
ISO 13322-2:2021(Main)
Particle size analysis — Image analysis methods — Part 2: Dynamic image analysis methods

This document describes a method to transfer the images from particles having relative motion to binary images within practical systems, in which the particles in the images are individually separated. Images of moving particles are created by an optical image capture device. Effects of particle movement on the images are either minimized by the instrumentation or corrected by software procedures. This method is applicable to the particle images that are clearly distinguishable from static background. Further processing of the binary image, which is then considered as static, is described in ISO 13322-1. A dynamic image analysis system is capable of measuring a higher number of particles compared to static image analysis systems. This document provides guidance on instrument qualification for particle size distribution measurements by using particulate reference materials. This document addresses the relative movement of the particles with respect to each other, the effect of particle movement on the image (motion blur), the movement and position along the optical axis (depth of field), and the orientation of the particles with respect to the camera.

  • Draft
    54 pages
    English language
    sale 15% off
ISO
ISO/TS 22107:2021(Main)
Dispersibility of solid particles into a liquid

This document establishes a generally applicable (i.e. not application specific) definition for dispersibility. It identifies significant characteristics for evaluating dispersibility and lists examples of methods used to characterize dispersibility in various applications. This document applies to processes that disperse powders into a liquid continuous phase while reducing the size of agglomerates or flocs down to the intended level, that homogenize an existing dispersed solid phase of a suspension or the mixture of two suspensions, or that exchange the original continuous phase in a suspension for another. Specific methods to disperse particles and to characterize the state of dispersion and/or homogeneity are only referenced, if necessary, for context. This document is applicable to nano- and micro-sized particles across a range of product applications.

  • Technical specification
    22 pages
    English language
    sale 15% off
  • Draft
    22 pages
    English language
    sale 15% off