iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 2884-2

(Main)

Paints and varnishes — Determination of viscosity using rotational viscometers — Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds

Paints and varnishes — Determination of viscosity using rotational viscometers — Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds

ISO 2884-2:2003 specifies a general procedure for determining the viscosity of paints, varnishes and related products with a viscosity of up to 34 pascal seconds. It is applicable mainly during production and thinning.

Peintures et vernis — Détermination de la viscosité au moyen de viscosimètres rotatifs — Partie 2: Mesurage relatif de la viscosité avec des agitateurs à disque ou à bille à des vitesses spécifiées

L'ISO 2884-2:2003 spécifie un mode opératoire général à suivre pour déterminer la viscosité des peintures, des vernis et des produits assimilés dans une gamme de viscosités allant jusqu'à 34 pascals seconde. Elle s'applique essentiellement à la production et à la dilution.

General Information

Status
Not Published
ICS
87.040 - Paints and varnishes
Technical Committee
ISO/TC 35/SC 9 - General test methods for paints and varnishes
Drafting Committee
ISO/TC 35/SC 9 - General test methods for paints and varnishes
Current Stage
6000 - International Standard under publication
Completion Date
10-Jun-2024
Ref Project

Relations

Consolidates
ISO/IEC 20897-2:2022 - Information security, cybersecurity and privacy protection — Physically unclonable functions — Part 2: Test and evaluation methods
Effective Date
16-Jul-2022
Revises
ISO 2884-2:2003 - Paints and varnishes — Determination of viscosity using rotary viscometers — Part 2: Disc or ball viscometer operated at a specified speed
Effective Date
02-Jul-2022

Buy Standard

ISO/PRF 2884-2 - Paints and varnishes — Determination of viscosity using rotational viscometers — Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds Released:13. 05. 2024ISO/PRF 2884-2 - Paints and varnishes — Determination of viscosity using rotational viscometers — Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds Released:13. 05. 2024
PreviousNext
Draft
ISO/PRF 2884-2 - Paints and varnishes — Determination of viscosity using rotational viscometers — Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds Released:13. 05. 2024
English language
5 pages
sale 15% off
Preview
sale 15% off
Preview
REDLINE ISO/PRF 2884-2 - Paints and varnishes — Determination of viscosity using rotational viscometers — Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds Released:13. 05. 2024REDLINE ISO/PRF 2884-2 - Paints and varnishes — Determination of viscosity using rotational viscometers — Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds Released:13. 05. 2024
PreviousNext
Draft
REDLINE ISO/PRF 2884-2 - Paints and varnishes — Determination of viscosity using rotational viscometers — Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds Released:13. 05. 2024
English language
5 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

International
Standard
ISO 2884-2
Second edition
Paints and varnishes —
Determination of viscosity using
rotational viscometers —
Part 2:
Relative measurement of viscosity
using disc or ball spindles at
specified speeds
Peintures et vernis — Détermination de la viscosité au moyen de
viscosimètres rotatifs —
Partie 2: Mesurage relatif de la viscosité avec des agitateurs à
disque ou à bille à des vitesses spécifiées
PROOF/ÉPREUVE
Reference number
ISO 2884-2:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
ISO 2884-2:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
PROOF/ÉPREUVE
© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO 2884-2:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Measuring assembly. 1
4.1 General .1
4.2 Spindles .2
4.3 Container .3
4.4 Temperature control device, .3
4.5 Reference fluids .3
5 Sampling . 3
6 Checking the measuring assembly . 3
7 Performance of the measurement . 4
7.1 General .4
7.2 With a reference fluid .4
7.3 With a sample .4
8 Repeatability and measuring error .
...

Style Definition
ISO/DISPRF 2884-2:2023(E) .
Formatted: Font: 14 pt, English (United Kingdom)
ISO /TC 35/SC 9/WG 30
Formatted: Right: 1.5 cm, Bottom: 1 cm, Gutter: 0 cm,
Section start: New page, Header distance from edge:
Secretariat: BSI
1.27 cm, Footer distance from edge: 1.27 cm
Date: 2024-03-0105-08 Formatted
...
Formatted: zzCover large
Formatted
...
Formatted
...
Paints and varnishes — Determination of viscosity using rotational
viscometers —
Formatted: Regular
Part 2:
Formatted: Cover Title_A2, Adjust space between Latin
Relative measurement of viscosity using disc or ball spindles at
and Asian text, Adjust space between Asian text and
specified speeds
numbers
Peintures et vernis — Détermination de la viscosité au moyen de viscosimètres rotatifs —
Partie 2: Mesurage relatif de la viscosité avec des agitateurs à disque ou à bille à des vitesses spécifiées
PROOF

---------------------- Page: 1 ----------------------
ISO/DISPRF 2884-2:2023(E2024(en) Formatted: Font: 11 pt
Formatted: HeaderCentered, Space After: 0 pt, Line
spacing: single
© ISO 20232024 Formatted: Font: 11 pt
Formatted: Font: 11 pt
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, Formatted: Indent: Left: 0 cm, Right: 0 cm, Space
Before: 0 pt, No page break before, Adjust space
or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO
at the address below or ISO’s member body in the country of the requester. between Latin and Asian text, Adjust space between
Asian text and numbers
ISO copyright office
Formatted: Default Paragraph Font
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Formatted: French (Switzerland)
EmailE-mail: copyright@iso.org
Formatted: French (Switzerland)
Website: www.iso.orgwww.iso.org
Formatted: French (Switzerland)
Published in Switzerland
Formatted: French (Switzerland)
Formatted: English (United Kingdom)
Formatted: FooterPageRomanNumber
ii © ISO 2023 – All rights reserved
© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO/DISPRF 2884-2:2023(E2024(en) Formatted: Font: 11 pt
Formatted: Font: 11 pt
Formatted: HeaderCentered, Left, Space After: 0 pt,
Contents
Line spacing: single
Formatted: Font: 11 pt
Foreword . iv
Formatted: Adjust space between Latin and Asian text,
1 Scope . 1
Adjust space between Asian text and numbers
2 Normative references . 1
3 Terms and definitions . 1
4 Measuring assembly . 1
4.1 General . 1
4.2 Spindles . 2
4.3 Container . 5
4.4 Temperature control device, . 5
4.5 Reference fluids . 6
5 Sampling . 6
6 Checking the measuring assembly . 6
7 Performance of the measurement . 6
7.1 General . 6
7.2 With a reference fluid . 6
7
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 16053-2:2024(Main)
Paints and varnishes — Coating materials and coating systems for exterior wood — Part 2: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water

This document specifies a method for determining the resistance of wood coatings to artificial weathering performed in an apparatus equipped with fluorescent UV lamps, condensation and water spray devices.

  • Standard
    18 pages
    English language
    sale 15% off
ISO
ISO 4628-10:2024(Main)
Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion

This document specifies a method for assessing the amount of filiform corrosion developed from a scribed mark by measuring the length of the longest filament L and the most frequent length M of filaments. Pictorial examples provided in Annex A of this document illustrate different ratings for the degree of filiform corrosion. A comparison of the test panels with the 12 pictures in Annex A does not supersede the obligatory numerical assessment (method 1 or 2). ISO 4628-1 defines a system used for designating the quantity and size of defects and the intensity of uniform changes in appearance of coatings and outlines the general principles of the system. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes such as colour changes, for example yellowing.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    8 pages
    French language
    sale 15% off
ISO
ISO/TR 20659-2:2024(Main)
Rheological test methods — Fundamentals and interlaboratory comparisons — Part 2: Determination of the time-dependent structural change (thixotropy)

This document gives information on an interlaboratory comparison for the determination of the time-dependent structural change (thixotropy) using rheological test methods. Thixotropy is the reversible, time-dependent decrease of shear viscosity η at a constant shear rate γ or shear stress τ. This document provides examples of fields of application, in which important material properties can be characterized by the thixotropy. These fields of application include: — effectiveness of rheological additives and thixotropic agents, respectively; — stability of the structure at rest (e.g. behaviour when starting to pump); — wet film thickness after processing; — levelling and sagging behaviour (e.g. without brushmarks or sag formation); — orientation of effect pigments.

  • Technical report
    36 pages
    English language
    sale 15% off
ISO
ISO/TR 20659-1:2024(Main)
Rheological test methods — Fundamentals and interlaboratory comparisons — Part 1: Determination of the yield point

This document gives information on an interlaboratory comparison for the determination of the yield point, using rheological test methods. The yield point is the shear stress τ below which a material does not flow. This document provides examples of fields of applications, in which important material properties are characterized with the aid of the yield point. These fields of application include: — effectiveness of rheological additives; — shelf life (e.g. with regard to sedimentation, separation and flocculation); — stability of the structure at rest; — behaviour when starting to pump; — use in scraper systems; — wet-film thickness; — levelling and sagging behaviour (e.g. without brushmarks or sag formation); — orientation of effect pigments.

  • Technical report
    17 pages
    English language
    sale 15% off
ISO
ISO/TR 5604:2024(Main)
Electrochemical noise measurement for assessing the protection of metal afforded by organic coatings

This document describes the principle of electrochemical noise measurement (EN), specifically focusing on the application of the technique to indicate the level of protection provided by an organic coating to the underlying metal. It discusses the principles behind the measurement method but also the type of electrochemical apparatus, the experimental set-up and electrodes configurations, the presentation of measured data, and analysis of results that have been used in the work done so far and reported in the references. This work has mainly been done in the laboratory, and there are some examples of work conducted in the field. NOTE At the time of publication of this document, electrochemical noise measurement for coatings is mainly used by a number of academic groups. This document aims to encourage more general application of this method, particularly to field work.

  • Technical report
    14 pages
    English language
    sale 15% off
ISO
ISO 2811-3:2023(Main)
Paints and varnishes — Determination of density — Part 3: Oscillation method

This document specifies a method for determining the density of paints, varnishes and related products using an oscillator. The method is suitable for all materials, including paste-like coatings. If a pressure-resistant type of apparatus is used, the method is also applicable to aerosols.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
ISO
ISO 4628-6:2023(Main)
Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method

This document provides pictorial reference standards for designating the degree of chalking of paint coatings. It also describes a method by which the degree of chalking is rated. In using this method, it is essential that care be taken to distinguish between true degradation products and adhering dirt, particularly when chalking is slight.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
ISO
ISO 20567-2:2023(Main)
Paints and varnishes — Determination of stone-chip resistance of coatings — Part 2: Single-impact test with a guided impact body

This document specifies a method to evaluate the resistance of automobile finishes and other coatings to the impact of a wedge-shaped body which is projected onto the surface under test to simulate the impact of stones.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
ISO
ISO 4624:2023(Main)
Paints and varnishes — Pull-off test for adhesion

This document specifies three methods for determining the adhesion by carrying out a pull-off test on a single coating or a multi-coat system of paint, varnish or related product. These methods include: — method A: using two dollies, suitable for testing both rigid and deformable substrates; — method B: testing from one side only, using a single dolly, suitable for rigid substrates only; — method C: using dollies, one as a painted substrate. These test methods have been found useful in comparing the adhesion behaviour of different coatings. It is most useful in providing relative ratings for a series of coated panels exhibiting significant differences in adhesion. The test can be applied using a wide range of substrates. Different procedures are given according to whether the substrate is deformable, e.g. thin metal, plastics and wood, or rigid, e.g. thick concrete and metal plates. To avoid distortion of the substrate during the tensile test, it is common to use a sandwich construction. For example, for special purposes, the coating can be applied directly to the face of a test dolly.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    12 pages
    French language
    sale 15% off
ISO
ISO 20567-4:2023(Main)
Paints and varnishes — Determination of stone-chip resistance of coatings — Part 4: Mobile multi-impact testing on a small testing area

This document specifies a mobile method for evaluating the resistance of automotive finishes to chilled-iron grit projected onto the surface under test to simulate the effect of stone chipping. Results from the test specified in this document are not comparable with results specified in ISO 20567-1.

  • Standard
    11 pages
    English language
    sale 15% off