iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 3827-5:1979

(Main)

Shipbuilding — Co-ordination of dimensions in ships' accommodation — Part 5: Co-ordinating sizes for key components

Shipbuilding — Co-ordination of dimensions in ships' accommodation — Part 5: Co-ordinating sizes for key components

Gives guidance on the choice of sizes for the components in question used in the outfitting of ships' accomodation. Is a companion work to the parts 1, 2, 3 and 4.

Construction navale — Coordination dimensionnelle pour l'ameublement des navires — Partie 5: Dimensions de coordination pour les composants clés

General Information

Status
Withdrawn
Publication Date
31-Jul-1979
Withdrawal Date
31-Jul-1979
ICS
47.020.80 - Accommodation spaces
Technical Committee
ISO/TC 8 - Ships and marine technology
Drafting Committee
ISO/TC 8 - Ships and marine technology
Current Stage
9599 - Withdrawal of International Standard
Completion Date
17-Mar-2006
Ref Project

Buy Standard

ISO 3827-5:1979 - Shipbuilding -- Co-ordination of dimensions in ships' accommodationISO 3827-5:1979 - Shipbuilding -- Co-ordination of dimensions in ships' accommodation
PreviousNext
Standard
ISO 3827-5:1979 - Shipbuilding -- Co-ordination of dimensions in ships' accommodation
English language
1 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 3827-5:1979 - Construction navale -- Coordination dimensionnelle pour l'ameublement des naviresISO 3827-5:1979 - Construction navale -- Coordination dimensionnelle pour l'ameublement des navires
PreviousNext
Standard
ISO 3827-5:1979 - Construction navale -- Coordination dimensionnelle pour l'ameublement des navires
French language
1 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 3827-5:1979 - Construction navale -- Coordination dimensionnelle pour l'ameublement des naviresISO 3827-5:1979 - Construction navale -- Coordination dimensionnelle pour l'ameublement des navires
PreviousNext
Standard
ISO 3827-5:1979 - Construction navale -- Coordination dimensionnelle pour l'ameublement des navires
French language
1 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

International Standard 382715
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWlE>KL1YHAPO~HAR OPl-AHM3A~klR fl0 CTAHAAPTVl3ALWl@ORGANISATION INTERNATIONALE DE 6JORMALISATION
Shipbuilding - Co-Ordination of dimensions in ships’
accommodation -
Part 5 : Co-ordinating sizes for key components
Construction navale - Coordination dimensionnelle pour l’ameublemen t des navires - Partie 5 : Dimensions de Coordination
pour /es composants ck!s
First edition - 1979-08-15
UDC 629.12.011.53 Ref. No. ISO 3827/5-1979 (EI
Descriptors : shipbuilding, ships, appointments, furnishing, dimensional Coordination, modular structures, furniture.
Price based on 1 page

---------------------- Page: 1 ----------------------
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards institutes (ISO member bedies). The work of developing Interna-
tional Standards is carried out through ISO technical committees. Every member body
interested in a subject for which a technical committee has been set up has the right to
be represented on that committee. International organizations, governmental and non-
governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council.
International Standard ISO 38271 5 was developed by Technical Committee ISO/TC 8,
Shipb uilding 8, and was circ ulated to the member bod ies in Aug ust 1978.
lt has been approved by the member bodies of the following countries :
Australia Ireland Romania
Belgium Italy Spain
B razil
Japan Sweden
Bulgaria Korea, Dem. P. Rep. of Turkey
Czechoslovakia Korea, Rep. of United Kingdom
Finland Mexico USSR
France Netherlands Y ugoslavia
India Norway
The member body of the following country expressed disapproval of the document on
technical grounds :
Germany, F. R.
International Organkation for Standardkation, 1979
Printed in Switzerland

----------------
...

4
Norme internationale 382715
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION*ME)I(LIYHAPO~HAR OPf-AHH3Al&lR Il0 CTAH~PTM3A~Wl.ORGANISATION INTERNATIONALE DE NORMALISATION
Construction navale - Coordination dimensionnelle pour
l’ameublement des navires -
Partie 5 : Dimensions de coordination pour ies
composants clés
Shipbuilding - Co-ordina tion of dimensions in ships ’ accommoda tien - Part 5 : Co-ordinating sizes for key components
Première édition - 1979-08-15
cz:
Y
CDU 629.12.011.53
Réf. no : ISO 3827/5-1979 (FI
Descripteurs : construction navale, navire, aménagement intérieur, ameublement, coordination dimensionnelle, structure modulaire, mobilier.
Prix basé sur 1 page

---------------------- Page: 1 ----------------------
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO.
La Norme internationale ISO 3827/5 a été élaborée par le comité technique ISO/TC 8,
Construction navale, et a été soumise aux comités membres en août 1978.
Les comités membres des pays suivants l’ont approuvée :
France
Australie Roumanie
Belgique Inde Royaume-Uni
Brésil Irlande Suède
Bulgarie Italie
Tchécoslovaquie
Corée, Rép. dém. p. de Japon Turquie
Mexique
Corée, Rép. de URSS
Espagne Norvége Yougoslavie
Finlande Pays- Bas
Le comité membre du pays suivant l’a désapprouvée pour des raisons techniques :
Allemagne, R. F.
0 Organisation internationale de normalisation, 1979 0
Imprimé en Suisse

---------------------- Page: 2 ----------------------
NORME INTERNATIONALE ISO 3827/5 (F
...

4
Norme internationale 382715
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION*ME)I(L1YHAPOLIHAR OPf-AHH3Al&lR Il0 CTAH~PTM3A~Wl~RGANISATION INTERNATIONALE DE NORMALISATION
Construction navale - Coordination dimensionnelle pour
l’ameublement des navires -
Partie 5 : Dimensions de coordination pour ies
composants clés
Shipbuilding - Co-ordina tion of dimensions in ships ’ accommoda tien - Part 5 : Co-ordinating sizes for key components
Première édition - 1979-08-15
cz:
Y
CDU 629.12.011.53
Réf. no : ISO 3827/5-1979 (FI
Descripteurs : construction navale, navire, aménagement intérieur, ameublement, coordination dimensionnelle, structure modulaire, mobilier.
Prix basé sur 1 page

---------------------- Page: 1 ----------------------
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO.
La Norme internationale ISO 3827/5 a été élaborée par le comité technique ISO/TC 8,
Construction navale, et a été soumise aux comités membres en août 1978.
Les comités membres des pays suivants l’ont approuvée :
France
Australie Roumanie
Belgique Inde Royaume-Uni
Brésil Irlande Suède
Bulgarie Italie
Tchécoslovaquie
Corée, Rép. dém. p. de Japon Turquie
Mexique
Corée, Rép. de URSS
Espagne Norvége Yougoslavie
Finlande Pays- Bas
Le comité membre du pays suivant l’a désapprouvée pour des raisons techniques :
Allemagne, R. F.
0
Organisation internationale de normalisation, 1979
Imprimé en Suisse

---------------------- Page: 2 ----------------------
NORME INTERNATIONALE ISO 3827/5 (F)
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 7547:2022(Main)
Ships and marine technology — Air-conditioning and ventilation of accommodation spaces and other enclosed compartments on board ships — Design conditions and basis of calculations

This document specifies design conditions and methods of calculation for air-conditioning and ventilation of accommodation spaces on board seagoing merchant ships for all conditions, except those encountered in extremely cold or hot climates (i.e. with lower or higher conditions than those stated in 4.2 and 4.3). This document also provides special considerations for machinery control-rooms, wheelhouse, and dry provision store rooms in Annexes C, D and E. NOTE Statutory requirements, rules and regulations can be applicable to the individual ships concerned.

  • Standard
    22 pages
    English language
    sale 15% off
ISO
ISO 20283-5:2016(Main)
Mechanical vibration — Measurement of vibration on ships — Part 5: Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships

ISO 20283-5:2016 gives guidelines for the measurement, evaluation and reporting of vibration with regard to habitability for all persons on-board passenger and merchant ships, especially for crew. Overall frequency-weighted r.m.s. vibration values in the frequency range 1 Hz to 80 Hz are given as guideline values for different areas on ships. ISO 20283-5:2016 is applicable to passenger and merchant ships with intended voyages of 24 h or more. ISO 20283-5:2016 specifies requirements for the instrumentation and the procedure of measurement in normally occupied spaces. It also contains analysis specifications and guidelines for the evaluation of ship vibration with respect to habitability. The evaluation of low-frequency ship motion which can result in motion sickness is covered by ISO 2631‑1. For the evaluation of the global structural vibration of a ship, however, see ISO 20283‑2.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    French language
    sale 15% off
ISO
ISO 20200:2023(Main)
Plastics — Determination of the degree of disintegration of plastic materials under composting conditions in a laboratory-scale test

This document specifies a method of determining the degree of disintegration of plastic materials when exposed to a laboratory-scale composting environment. The method is not applicable to the determination of the biodegradability of plastic materials under composting conditions. Further testing is necessary to be able to claim compostability.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
ISO
ISO 9241-221:2023(Main)
Ergonomics of human-system interaction — Part 221: Human-centred design process assessment model

This document specifies the process references model (PRM) for human-centred design (HCD) according to ISO 9241-220, as well as the process assessment model (PAM) for assessing these processes, based on ISO/IEC 33020 and in accordance with the requirements of ISO/IEC 33004. This HCD PAM contains a set of indicators to be considered while interpreting the intent of the HCD PRM defined in ISO 9241-220. These indicators can also be applied when implementing a process improvement programme post an assessment. NOTE 1 The PRM in this document focuses on assessing HCD processes rather than system life cycle, for example as in ISO/IEC/IEEE 15288, or software life cycle, as in ISO/IEC/IEEE 12207. NOTE 2 If processes beyond the scope of ISO 9241-220 are required, appropriate processes from other PRMs, such as ISO/IEC/IEEE 12207, ISO/IEC/IEEE 15288 or ISO/TS 18152, can be added based on the business needs of the organization. The intended application of this document is computer-based interactive systems. While the processes apply to interactive systems that deliver services, they do not cover the design of those services. The relevant aspects of the processes can also be applied to simple or non-computer-based interactive systems. NOTE 3 HCD concentrates on the human-centred aspects of design and not on other aspects of design, such as mechanical construction, programming or the basic design of services. The process descriptions in this document provide the basis for a rigorous assessment of an enterprise’s capability to carry out human-centred processes in conformity with the ISO/IEC 33004 and ISO/IEC 33020. This document is intended for use by organizations that want to address and improve their treatment of human-centred design of either their internal systems or the products and services they provide, and the procurement of systems and parts of systems. The processes can be applied by small- and medium-sized enterprises as well as by large organizations. NOTE 4 The scope of application of the PAM is the same as that of the PRM, which is described in ISO 9241-220:2019, Clause 1.

  • Standard
    102 pages
    English language
    sale 15% off
ISO
ISO 19642-1:2023(Main)
Road vehicles — Automotive cables — Part 1: Vocabulary and design guidelines

This document defines terms in the field of cables applied in road vehicle general purpose applications, for use in the other parts of the ISO 19642 series.

  • Standard
    27 pages
    English language
    sale 15% off
ISO
ISO/IEC 9797-1:2011/Amd 1:2023(Amendment)
Information technology — Security techniques — Message Authentication Codes (MACs) — Part 1: Mechanisms using a block cipher — Amendment 1
  • Standard
    1 page
    English language
    sale 15% off
ISO
ISO 23316-7:2023(Main)
Tractors and machinery for agriculture and forestry — Electrical high-power interface 700 V DC / 480 V AC — Part 7: Mechanical integration

This document instructs the manufacturers of tractors and implements how to integrate mechanically and use the HPI. NOTE The terms "tractor" and "implement” are used instead of “supply system” and “consumer system” for better understanding in this part.

  • Standard
    5 pages
    English language
    sale 15% off
ISO
ISO/TS 24665:2023(Main)
Playground and recreational areas — Framework for the competence of playground inspectors and playground maintenance technicians

This document gives guidance and requirements for the education, examination and evaluation of the inspectors’ and maintenance technicians’ competence concerning public playground and recreational areas. This document describes the knowledge and competence required for each specific task an inspector or technician performs. This document is intended primarily for public playgrounds, but the principles are applicable to other recreational areas. This document does not include benefit/risk assessment methods. This document does not cover the competence of staff conducting product certification. NOTE 1 The different types of inspections covered are: routine visual inspection; operational inspection; annual main inspection; post-installation inspection; post-accident inspection; pre-installation consultation; mid-installation surveillance. NOTE 2 This document can be applicable to: roller-sport infrastructure; multi-sport arenas; outdoor exercise equipment; bouldering walls; portable and permanent socketed goals; parkour facilities; adventure playgrounds; ropes courses; inflatable play equipment.

  • Technical specification
    23 pages
    English language
    sale 15% off
  • Draft
    22 pages
    English language
    sale 15% off
  • Draft
    22 pages
    English language
    sale 15% off
ISO
ISO 22574:2023(Main)
Road vehicles — Brake linings friction materials — Visual inspection

This document defines visual aspects for the identification and assessment of product characteristics for friction materials in terms of quality and for commercial and technical agreements. The sequence of the product characteristics represents no order of priority. Inspection is carried out in unused, “as supplied” condition. In some characteristic features, there are differences between brake linings with an effective lining pad area less than 120 cm2 and larger than 120 cm2. The acceptance criteria ensure exclusion of any characteristics that could impact the function and performance of brake linings and applies unless other agreements between the customer and the supplier.

  • Standard
    35 pages
    English language
    sale 15% off
ISO
ISO 7055:2023(Main)
Natural gas — Upstream area — Determination of drag reduction in laboratory for slick water

This document specifies a method for the determination of drag reduction of slick water, which is mainly used to evaluate the drag reduction performance of slick water. This document uses the pipeline method to evaluate the drag reduction, which is currently recognized as the best method to evaluate the drag reduction performance. This document describes the device, experimental conditions and operating steps in detail. The drag reduction value obtained by evaluation according to this document can effectively represent the on-site drag reduction performance.

  • Standard
    5 pages
    English language
    sale 15% off