iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 8100-34:2021

(Main)

Lifts for the transport of persons and goods — Part 34: Measurement of lift ride quality

Lifts for the transport of persons and goods — Part 34: Measurement of lift ride quality

This document specifies requirements and methodology for the measurement and reporting of lift ride quality during lift motion. It does not specify acceptable or unacceptable ride quality. Lift performance parameters are often referenced in conjunction with lift ride quality. Parameters relevant to lift performance include jerk and acceleration. This document defines and uses performance parameters where they are integral to the evaluation of ride quality.

Ascenseurs pour le transport des personnes et des charges — Partie 34: Mesure de la qualité de déplacement des ascenseurs

Le présent document spécifie les exigences et la méthode relatives au mesurage et à l’évaluation de la qualité de déplacement d’un ascenseur. Il ne spécifie aucun degré d’acceptabilité ou de non-acceptabilité de la qualité de déplacement. Les paramètres de performance d’un ascenseur sont souvent associés à sa qualité de déplacement. Les paramètres liés à la performance d’un ascenseur comprennent le jerk et l’accélération. Le présent document définit et utilise des paramètres de performance lorsqu’ils font partie intégrante de l’évaluation de la qualité de déplacement.

General Information

Status
Published
Publication Date
19-Dec-2021
ICS
91.140.90 - Lifts. Escalators
Technical Committee
ISO/TC 178 - Lifts, escalators and moving walks
Drafting Committee
ISO/TC 178 - Lifts, escalators and moving walks
Current Stage
6060 - International Standard published
Start Date
20-Dec-2021
Due Date
26-Aug-2021
Completion Date
20-Dec-2021
Ref Project

Relations

Consolidated By
ISO 22568-4:2021 - Foot and leg protectors — Requirements and test methods for footwear components — Part 4: Non-metallic perforation resistant inserts
Effective Date
06-Jun-2022
Revises
ISO 18738-1:2012 - Measurement of ride quality — Part 1: Lifts (elevators)
Effective Date
23-Apr-2020

Buy Standard

ISO 8100-34:2021 - Lifts for the transport of persons and goodsISO 8100-34:2021 - Lifts for the transport of persons and goods
PreviousNext
Standard
ISO 8100-34:2021 - Lifts for the transport of persons and goods
English language
18 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 8100-34:2021 - Ascenseurs pour le transport des personnes et des chargesISO 8100-34:2021 - Ascenseurs pour le transport des personnes et des charges
PreviousNext
Standard
ISO 8100-34:2021 - Ascenseurs pour le transport des personnes et des charges
French language
20 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 8100-34
First edition
2021-12
Lifts for the transport of persons and
goods —
Part 34:
Measurement of lift ride quality
Ascenseurs pour le transport des personnes et des charges —
Partie 34: Mesure de la qualité de déplacement des ascenseurs
Reference number
ISO 8100-34:2021(E)
© ISO 2021

---------------------- Page: 1 ----------------------
ISO 8100-34:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2021 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 8100-34:2021(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Measuring instrumentation .3
4.1 General . 3
4.2 Characteristics. 3
4.3 Processing of vibration data . 4
4.4 Environmental effects . 4
4.5 Sound measurement requirements . 4
4.6 Calibration requirements. 4
4.6.1 General . 4
4.6.2 Vibration measuring system. 4
4.6.3 Acceleration measuring system . 5
4.6.4 Sound measuring system . 5
5 Evaluation of ride quality . 5
5.1 Boundaries of calculation . 5
5.2 Acceleration and deceleration . 6
5.2.1 General .
...

NORME ISO
INTERNATIONALE 8100-34
Première édition
2021-12
Ascenseurs pour le transport des
personnes et des charges —
Partie 34:
Mesure de la qualité de déplacement
des ascenseurs
Lifts for the transport of persons and goods —
Part 34: Measurement of lift ride quality
Numéro de référence
ISO 8100-34:2021(F)
© ISO 2021

---------------------- Page: 1 ----------------------
ISO 8100-34:2021(F)
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2021
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii
  © ISO 2021 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 8100-34:2021(F)
Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d’application . 1
2 Références normatives .1
3 Termes et définitions . 1
4 Instruments de mesure .3
4.1 Généralités . 3
4.2 Caractéristiques . 3
4.3 Traitement des données vibratoires . 4
4.4 Effets de l’environnement . 4
4.5 Exigences relatives au mesurage du bruit . 4
4.6 Exigences d’étalonnage . 4
4.6.1 Généralités . 4
4.6.2 Système de mesurage des vibrations . 5
4.6.3 Système de mesurage de l’accélération . 5
4.6.4 Système de mesurage du bruit . 5
5 Évaluation de la qualité de déplacement . 5
5.1 Limites de calcul . 5
5.2 Accélération et décélération . 6
5.2.1 Généralités .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 25745-1:2023(Main)
Energy performance of lifts, escalators and moving walks — Part 1: Energy measurement and verification

This document specifies: a) methods of measuring actual energy consumption of lifts, escalators and moving walks on a single unit basis; b) methods of carrying out periodic energy verification checks on lifts, escalators and moving walks in operation. This document only considers the energy performance during the operational portion of the life cycle of the lifts, escalators or moving walks. For lifts, this document does not cover energy aspects, such as: a) hoistway lighting; b) heating and cooling equipment, including fans in the lift car; c) machine room lighting; d) machine room heating, ventilation and air conditioning; e) non-lift, display systems, closed circuit television security cameras, etc.; f) non-lift, monitoring systems (building management systems, etc.); g) the effect of lift group dispatching on energy consumption; h) non-lift equipment consumption through the power sockets; i) energy storage systems if used as an alternative energy source for operation. For escalators and moving walks, this document does not cover energy aspects of the ancillary equipment, such as: a) lighting with the exception of comb plate lighting and step gap lighting and traffic light; b) cooling and heating; c) alarm devices and emergency battery supplies equipment, etc.

  • Standard
    16 pages
    English language
    sale 15% off
  • Standard
    17 pages
    French language
    sale 15% off
ISO
ISO/TR 14799-2:2023(Main)
Comparison of worldwide escalator and moving walk safety standards — Part 2: Abbreviated comparison and comments

This document consists of a comparison of the requirements of selected topics as covered by the following worldwide safety standards (excluding local deviations): a) Europe (CEN) – EN 115‑1:2017, Safety of escalators and moving walks — Part 1: Construction and installation; b) North America - ASME A17.1/CSA B44:2016, Safety Code for Elevators and Escalators; c) Japan – Safety requirements mainly comprised of Building Standard Law Enforcement Order (BSLJ-EO), Notifications of Ministry of Construction (MOC-N), and Japan Elevator Association Standard (JEAS).

  • Technical report
    143 pages
    English language
    sale 15% off
  • Draft
    143 pages
    English language
    sale 15% off
  • Draft
    143 pages
    English language
    sale 15% off
ISO
ISO 8100-33:2022(Main)
Lifts for the transport of persons and goods — Part 33: T-type guide rails for lift cars and counterweights

This document specifies the grades and quality, the dimensional characteristics, the dimensional and geometrical tolerances, and the surface finish of standardized guide rails and their fishplates. In addition, this document defines a designation system for guide rails. This document is applicable to guide rails used in passenger lift and service lift installations to provide guiding for the car and the counterweight.

  • Standard
    17 pages
    English language
    sale 15% off
  • Standard
    18 pages
    French language
    sale 15% off
ISO
ISO 8102-20:2022(Main)
Electrical requirements for lifts, escalators and moving walks — Part 20: Cybersecurity

This document specifies cybersecurity requirements for new lifts, escalators and moving walks, referred to in this document as “equipment under control (EUC)”, designed in accordance with the ISO 8100 series. It is also applicable with other lift, escalator and moving walk standards that specify similar requirements, and to other lift-related equipment connected to the EUC. This document specifies product and system requirements related to cybersecurity threats in the following lifecycle steps: — product development (process and product requirements); — manufacturing; — installation; — operation and maintenance; — decommissioning. This document addresses the roles of product supplier and system integrator as shown in IEC 62443-4-1:2018, Figure 2, for the EUC. This document does not address the role of asset owner as shown in IEC 62443-4-1:2018, Figure 2, but defines requirements for the product supplier and system integrator of the EUC to establish documentation allowing the asset owner, referred to as the “EUC owner” in this document, to achieve and maintain the security of the EUC. This document specifies the minimum cybersecurity requirements for: — essential functions; — safety functions; — alarm functions. This document is applicable to EUCs that are capable of connectivity to external systems such as building networks, cloud services, or service tools. The capability to connectivity can exist through equipment permanently available on site, or equipment temporarily brought to the location during the installation, operation and maintenance, or decommissioning steps. EUC interfaces to external systems and services are in the scope of this document. External systems and services as such are out of the scope of this document. This document does not apply to EUC that are installed before the date of its publication.

  • Standard
    34 pages
    English language
    sale 15% off
  • Standard
    38 pages
    French language
    sale 15% off
ISO
ISO/TR 14799-1:2022(Main)
Comparison of worldwide escalator and moving walk safety standards — Part 1: Clause by clause comparison

This document compares the requirements of selected clauses of the following standards (excluding local deviations): a) EN115‑1:2017 [12]; b) ASME A17.1/CSA B44-2016 [11]; c) Japanese Codes 2016 [13]. NOTE The original Japanese codes were written in Japanese and no official English versions have been released. Listed Japanese codes were carefully translated, but English correspondence to the original document is not guaranteed.

  • Technical report
    230 pages
    English language
    sale 15% off
  • Technical report
    250 pages
    French language
    sale 15% off
ISO
ISO 8103-9:2022(Main)
Escalators and moving walks — Part 9: Measurement of ride quality

This document specifies requirements and methodology for the measurement and reporting of escalator and moving walk ride quality. This document does not specify acceptable or unacceptable ride quality values.

  • Standard
    17 pages
    English language
    sale 15% off
  • Standard
    17 pages
    French language
    sale 15% off
ISO
ISO 8102-2:2021(Main)
Electrical requirements for lifts, escalators and moving walks — Part 2: Electromagnetic compatibility with regard to immunity

This document specifies the immunity performance criteria and test levels for apparatus used in lifts, escalators and moving walks which are intended to be permanently installed in buildings including the basic safety requirements in regard to their electromagnetic environment. These levels represent essential EMC requirements. This document refers to EM conditions as existing in residential, office and industrial buildings. This document addresses commonly known EMC related hazards and hazardous situations relevant to lifts, escalators and moving walks when they are used as intended and under the conditions foreseen by the lift installer or escalator and/or moving walk manufacturer. It is assumed that no ports connected to safety circuit only are rated at currents greater than 100 amps. It is assumed that mobile telephones and radio transmitters used at frequencies and power of that stated in Table 1 are not placed within 200 mm distance from safety circuit(s). However: — performance criteria and test levels for apparatus/assembly of apparatus used in general function circuits do not cover situations with an extremely low probability of occurrence; — this document does not apply to other apparatus already proven to be in conformity to the EMC national regulation, and not related to the safety of the lift, escalator or moving walk, such as lighting apparatus, communication apparatus, etc. This document does not apply to electromagnetic environments such as: — radio transmitter stations; — railways and metros; — heavy industrial plant; — electricity power stations; which need additional investigations. This document is not applicable to apparatus which were manufactured before the date of its publication.

  • Standard
    16 pages
    English language
    sale 15% off
  • Draft
    16 pages
    English language
    sale 15% off
ISO
ISO 8102-1:2020(Main)
Electrical requirements for lifts, escalators and moving walks — Part 1: Electromagnetic compatibility with regard to emission

This document specifies the emission limits in relation to electromagnetic disturbances and test conditions for lifts, escalators and moving walks, which are intended to be permanently installed in buildings. It is possible, however, that these limits do not provide full protection against disturbances caused to radio and TV reception when such equipment is used within distances given in Table 1. This document is not applicable for apparatus which are manufactured before the date of its publication

  • Standard
    13 pages
    English language
    sale 15% off
  • Draft
    13 pages
    English language
    sale 15% off
ISO
ISO 8100-32:2020(Main)
Lifts for the transportation of persons and goods — Part 32: Planning and selection of passenger lifts to be installed in office, hotel and residential buildings

This document covers traffic planning and selection of new passenger lift installations in office, hotel and residential buildings. The requirements and recommendations given are applicable to both simple and complex lift installations. This document gives guidance to select the most appropriate method of traffic planning for each case within the scope. This document permits the number and configuration of lifts and their main characteristics to be determined at the early stages of building design, provided that the size and intended use of the building is known. This document is applicable to lifts classified according to Table 1. This document is applicable to mixed use buildings provided that the mixed use can be evaluated separately as either office, residential or hotel use. This document proposes a standardized method of lift traffic planning. Alternative methods can be valid but are not in the scope of this document. This document gives basic requirements and recommendations as part of the planning and selection of lift(s) relating to: a) the design criteria to be evaluated; b) the values of design criteria to be used; c) a calculation method (see Clause 7) to be used as part of simple planning and selection of lifts (5.3); d) a simulation method (see Clause 8) to be used as part of simple and more complex planning and selection of lifts (5.3); e) output report format of lift planning and selection analysis to be provided to interested parties; f) consideration of existing safety standards and cultural norms for determining the number of persons that can fit into a specific size of car[1]; g) accommodation for luggage, bicycles, prams, etc., or other non-personal items that can be transported with passengers in the lifts; h) accessibility for persons with disabilities. This document does not address: i) the transportation of goods only; j) the transportation of passengers using multiple cars sharing a single hoist way; k) the transportation of passengers using double deck systems; l) terminal to terminal travel in excess of 200 m and/or rated speed above 7 m/s; m) variations to the calculation method (e.g. traffic conditions other than uppeak, door dwell time definitions, unequal floor heights, unequal floor populations, speed not being reached in one floor jump, etc.); n) variations to the simulation method (e.g. passenger batches or traffic templates with variable passenger demand); o) design of simulator models or traffic control systems; p) advanced passenger features (e.g. walking speed); q) performance verifications of the design after installation. [1] The European Lift Directive 2014 refers to the car as a carrier.

  • Standard
    47 pages
    English language
    sale 15% off
  • Standard
    50 pages
    French language
    sale 15% off
  • Draft
    47 pages
    English language
    sale 15% off
ISO
ISO 8100-30:2019(Main)
Lifts for the transport of persons and goods — Part 30: Class I, II, III and VI lifts installation
SIST ISO 8100-30:2021

This document specifies the necessary dimensions to permit the installation of passenger lifts of class I, II, III and VI. These dimensions reflect the requirements for the apparatus. This document is applicable to all new lift installations, irrespective of drive systems, including a car with one entrance, to be installed in a new building. However, for arrangements with counterweight at the side, a through-entrance configuration is possible. Where relevant, this document is also applicable to an installation in an existing building. This document is not applicable to lifts of rated speed greater than 6,0 m/s. NOTE It is the responsibility of the user to consult the manufacturer for such installations.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    30 pages
    English language
    sale 15% off
  • Standard
    30 pages
    English language
    sale 15% off
  • Standard
    31 pages
    French language
    sale 15% off
  • Standard
    30 pages
    French language
    sale 15% off