ISO 374-5

Protective gloves against dangerous chemicals and micro-organisms — Part 5: Terminology and performance requirements for micro-organisms risks

ISO 374-5:2016 specifies the requirements and test methods for protective gloves intended to protect the user against micro-organisms. NOTE If other protection features is to be needed, e.g. chemical risks, mechanical risks, thermal risks, electrostatic dissipation etc., the appropriate specific performance standard is to be used in addition. Further information on protective gloves standards can be found in the EN 420.

Gants de protection contre les produits chimiques dangereux et les micro-organismes — Partie 5: Terminologie et exigences de performance pour les risques par les micro-organismes

L'ISO 374-5:2016 spécifie une méthode d'essai permettant de déterminer la résistance à la pénétration des gants qui protègent contre les micro-organismes. NOTE Si d'autres fonctions de protection doivent être couvertes, par exemple les risques mécaniques, les risques thermiques, la dissipation électrostatique, etc., il convient que la norme de performance spécifique appropriée soit utilisée en complément. Des informations supplémentaires sur les normes concernant les gants de protection peuvent se trouver dans l'EN 420.

General Information

• Status: Not Published
• ICS: 01.040.13 - Environment. Health protection. Safety (Vocabularies)
• ICS: 13.340.40 - Hand and arm protection
• Technical Committee: ISO/TC 94/SC 13 - Protective clothing
• Drafting Committee: ISO/TC 94/SC 13 - Protective clothing
• Current Stage: 6000 - International Standard under publication
• Completion Date: 14-Jun-2024

Relations

• Consolidates: ISO 3316:2018 - Assembly tools for screws and nuts — Attachments for hand-operated square drive socket wrenches — Dimensions and tests
• Effective Date: 06-Jun-2022
• Revises: ISO 374-5:2016 - Protective gloves against dangerous chemicals and micro-organisms — Part 5: Terminology and performance requirements for micro-organisms risks
• Effective Date: 06-Jun-2022

Standards Content (Sample)

FINAL DRAFT
International
Standard
ISO/FDIS 374-5
ISO/TC 94/SC 13
Protective gloves against dangerous
Secretariat: SNV
chemicals and micro-organisms —
Voting begins on:
2024-03-21
Part 5:
Terminology and performance
Voting terminates on:
2024-06-13
requirements for micro-organisms
risks
Gants de protection contre les produits chimiques dangereux et
les micro-organismes —
Partie 5: Terminologie et exigences de performance pour les
risques par les micro-organismes
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/CEN PARALLEL PROCESSING LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/FDIS 374-5:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
FINAL DRAFT
ISO/FDIS 374-5:2024(en)
International
Standard
ISO/FDIS 374-5
ISO/TC 94/SC 13
Protective gloves against dangerous
Secretariat: SNV
chemicals and micro-organisms —
Voting begins on:
Part 5: 2024-03-21
Terminology and performance
Voting terminates on:
2024-06-13
requirements for micro-
organisms risks
Gants de protection contre les produits chimiques dangereux et
les micro-organismes —
Partie 5: Terminologie et exigences de performance pour les
risques par les micro-organismes
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
COPYRIGHT PROTECTED DOCUMENT
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO 2024
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/CEN PARALLEL PROCESSING
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland Reference number
ISO/FDIS 374-5:2024(en) © ISO 2024

© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO/FDIS 374-5:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Sampling . 2
4.1 Sampling for viral penetration testing .2
4.2 Sampling for bacteria/fungi penetration testing .3
5 Performance requirement. 3
5.1 General requirements .3
5.2 Dexterity .
...

Style Definition
...
Style Definition
...
Style Definition
ISO/FDIS 374-5 .
Style Definition
...
ISO/TC 94/SC 13
Style Definition
...
Style Definition
...
Date: 2023-06-21
Style Definition
...
Style Definition
ISO 374-5:2023(E) .
Style Definition
...
Secretariat: SNV
Style Definition
...
Style Definition
...
Date: 2024-xx
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Protective gloves against dangerous chemicals and micro-
Style Definition
...
organisms — Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Part 5:
Style Definition
...
Style Definition
Terminology and performance requirements for micro-organisms
...
Style Definition
...
risks
Style Definition
...
Gants de protection contre les produits chimiques dangereux et les micro-organismes- Partie 5: Style Definition
...
Terminologie et exigences de performance pour les risques contre les micro-organismes —
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
St l D fi iti

---------------------- Page: 1 ----------------------
© Partie 5: Terminologie et exigences de performance pour les risques par les micro-organismes
FDIS stage

---------------------- Page: 2 ----------------------
ISO/FDIS 374-5:2023(E) Formatted: Font: Bold
Formatted: Header, Left
Formatted: Left: 1.9 cm, Right: 1.9 cm, Gutter: 0 cm,
© ISO 20232024
Header distance from edge: 1.27 cm
Commented [eXtyles1]: The reference is to a withdrawn
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
standard which has been replaced
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,

including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can ISO 20344, Personal protective equipment — Test methods for
footwear
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
Formatted: Default Paragraph Font
ISO copyright office
Formatted: Adjust space between Latin and Asian text, Adjust
CP 401 • Ch. de Blandonnet 8 • CP 401
space between Asian text and numbers
CH-1214 Vernier, Geneva, Switzerland
Tel.Phone: + 41 22 749 01 11
Formatted: French (Switzerland)
Fax + 41 22 749 09 47
E-mail: [e-mail] Formatted: French (Switzerland)
Formatted: zzCopyright address, Adjust space between Latin
www.iso.org
and Asian text, Adjust space between Asian text and numbers
Website: www.iso.org
Published in Switzerland
Formatted: Footer, Left
© ISO 2023 – All rights reserved iii
© ISO 2024 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/FDIS 374-5:2023(E)
Formatted: Adjust space between Latin and Asian text, Adjust
Contents
space between Asian text and numbers, Tab stops: Not at
0.71 cm
Foreword . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Sampling . 2
4.1 Sampling for viral penetration testing. 2
4.2 Sampling for bacteria/fungi penetration testing . 3
5 Performance requirement .
...