ISO 14930:2012

Leather — Leather for dress gloves — Specification

ISO 14930:2012 specifies the requirements, sampling and methods of testing for chrome and chrome-alum tanned leather used for the manufacture of dress gloves. ISO 14930:2012 does not apply to chamois and alum tanned (tawed) leather or to leather for safety or sports gloves.

Cuir — Cuir pour gants de cérémonie — Spécifications

General Information

• Status: Published
• Publication Date: 19-Jan-2012
• ICS: 59.140.30 - Leather and furs
• Technical Committee: ISO/TC 120/SC 2 - Tanned leather
• Drafting Committee: ISO/TC 120/SC 2 - Tanned leather
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 12-Sep-2023

Relations

• Amended By: ISO 14930:2012/Amd 1:2021 - Leather — Leather for dress gloves — Specification — Amendment 1: Colour fastness to to-and-fro rubbing, tear load and colour fastness to light
• Effective Date: 28-Aug-2021

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 14930
First edition
2012-02-01

Leather — Leather for dress gloves —
Specification
Cuir — Cuir pour gants de cérémonie — Spécifications




Reference number
ISO 14930:2012(E)
©
ISO 2012

---------------------- Page: 1 ----------------------
ISO 14930:2012(E)

COPYRIGHT PROTECTED DOCUMENT


©  ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO 2012 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 14930:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 14930 was prepared by Technical Committee ISO/TC 120, Leather, Subcommittee SC 2, Tanned leather.

© ISO 2012 – All rights reserved iii

---------------------- Page: 3 ----------------------
INTERNATIONAL STANDARD ISO 14930:2012(E)

Leather — Leather for dress gloves — Specification
1 Scope
This International Standard specifies the requirements, sampling and methods of testing for chrome and
chrome-alum tanned leather used for the manufacture of dress gloves.
This International Standard does not apply to chamois and alum tanned (tawed) leather or to leather for safety
or sports gloves.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 105-B02, Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc
fading lamp test
ISO 2418, Leather — Chemical, physical and mechanical and fastness tests — Sampling location
ISO 2419, Leather — Physical and mechanical tests — Sample preparation and conditioning
ISO 2588, Leather — Sampling — Number of items for a gross sample
ISO 3376, Leather — Physical and mechanical tests — Determination of tensile strength and percentage
extension
ISO 3377-2, Leather — Physical and mechanical tests — Determination of tear load — Part 2: Double edge
tear
ISO 3380, Leather — Phy
...