Information technology — Biometric presentation attack detection — Part 4: Profile for testing of mobile devices

This document is a profile that specifies requirements for testing biometric presentation attack detection (PAD) mechanisms on mobile devices with local biometric recognition and on biometric modules integrated into mobile devices. The profile lists requirements from ISO/IEC 30107-3 that are specific to mobile devices. It also establishes requirements that are not present in ISO/IEC 30107-3. For each requirement, the profile defines an “Approach in PAD Tests for Mobile Devices”. For some requirements, numerical values or ranges are provided in the form of best practices. This profile is applicable to mobile devices that operate as closed systems with no access to internal results, including mobile devices with local biometric recognition as well as biometric modules for mobile devices. This document is not applicable to mobile devices with solely remote biometric recognition. The attacks considered in this document take place at the capture device during the presentation and collection of biometric characteristics. Any other attacks are outside the scope of this document.

Technologies de l'information — Détection d'attaque de présentation en biométrie — Partie 4: Profil pour les essais des dispositifs mobiles

General Information

Status
Published
Publication Date
06-Feb-2024
Current Stage
6060 - International Standard published
Start Date
07-Feb-2024
Due Date
11-Feb-2024
Completion Date
07-Feb-2024
Ref Project

Relations

Buy Standard

Draft
ISO/IEC FDIS 30107-4 - Information technology — Biometric presentation attack detection — Part 4: Profile for testing of mobile devices Released:26. 10. 2023
English language
15 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
REDLINE ISO/IEC FDIS 30107-4 - Information technology — Biometric presentation attack detection — Part 4: Profile for testing of mobile devices Released:26. 10. 2023
English language
15 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

FINAL
INTERNATIONAL ISO/IEC
DRAFT
STANDARD FDIS
30107-4
ISO/IEC JTC 1/SC 37
Information technology — Biometric
Secretariat: ANSI
presentation attack detection —
Voting begins on:
2023-11-09
Part 4:
Voting terminates on:
Profile for testing of mobile devices
2024-01-04
Technologies de l'information — Détection d'attaque de présentation
en biométrie —
Partie 4: Profil pour les essais des dispositifs mobiles
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/IEC FDIS 30107-4:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO/IEC 2023

---------------------- Page: 1 ----------------------
ISO/IEC FDIS 30107-4:2023(E)
FINAL
INTERNATIONAL ISO/IEC
DRAFT
STANDARD FDIS
30107-4
ISO/IEC JTC 1/SC 37
Information technology — Biometric
Secretariat: ANSI
presentation attack detection —
Voting begins on:
Part 4:
Voting terminates on:
Profile for testing of mobile devices
Technologies de l'information — Détection d'attaque de présentation
en biométrie —
Partie 4: Profil pour les essais des dispositifs mobiles
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: +41 22 749 01 11
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: copyright@iso.org
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/IEC FDIS 30107­4:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN­
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
  © ISO/IEC 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO/IEC 2023

---------------------- Page: 2 ----------------------
ISO/IEC FDIS 30107-4:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms . 2
5 Conformance . 2
6 General profile for PAD testing of mobile devices . 2
7 FIDO Profile for PAD testing of mobile devices . 9
Bibliography .15
iii
© ISO/IEC 2023 – All rights reserved

---------------------- Page: 3
...

ISO/IEC DISFDIS 30107-4:2023(E)
ISO/IEC JTC 001 1/SC 37/WG 3
Secretariat: ANSI
Date: 2023-01-2510-26
Information technology — Biometric presentation attack
detection —
Part 4:
Profile for testing of mobile devices
Technologies de l'information — Détection d'attaque de présentation en biométrie —
Partie 4: Profil pour les essais des dispositifs mobiles
FDIS stage

---------------------- Page: 1 ----------------------
ISO/IEC DISFDIS 30107-4:2023(E)
© ISO/IEC 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
EmailE-mail: copyright@iso.org
Website: www.iso.orgwww.iso.org
Published in Switzerland
ii © ISO/IEC 2023 – All rights reserved
ii © ISO/IEC 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC DISFDIS 30107-4:2023(E)
Contents
Foreword . iv
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Abbreviated terms . 2
5 Conformance . 2
6 General profile for PAD testing of mobile devices . 3
7 FIDO Profile for PAD testing of mobile devices . 9
Bibliography . 17

Foreword ii
Introduction iii
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Conformance 2
5 Profile for PAD testing of mobile devices 3
Annex A (Normative) FIDO biometric presentation attack detection evaluation requirements 8
Bibliography 13
© ISO/IEC 2023 – All rights reserved iii
© ISO/IEC 2023 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/IEC DISFDIS 30107-4:2023(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical activity.
ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of document should be noted. This document was drafted in accordance with the editorial
rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directiveswww.iso.org/directives or
www.iec.ch/members_experts/refdocswww.iec.ch/members_experts/refdocs).
ISO and IEC draw attention to the possibility that the implementation of this document may involve the
use of (a) patent(s). ISO and IEC take no position concerning the evidence, validity or applicability of any
claimed patent rights in respect thereof. As of the date of publication of this document, ISO and IEC had
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.