ISO 10349-4:1992

Photography — Photographic-grade chemicals — Test methods — Part 4: Determination of residue after ignition

The method is based on weighing a test portion and placing it in prepared ignition crucible, heating the crucible over a low flame to drive off any volatile matter, incineration in a furnace, cooling to room temperature in a desiccator, and reweighing.

Photographie — Produits chimiques de qualité photographique — Méthodes d'essai — Partie 4: Détermination du résidu après calcination

General Information

• Status: Published
• Publication Date: 29-Dec-1992
• ICS: 37.040.30 - Photographic chemicals
• Technical Committee: ISO/TC 42 - Photography
• Drafting Committee: ISO/TC 42 - Photography
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 20-Dec-2023

Standards Content (Sample)

INTERNATIONAL IS0
STANDARD
10349-4
First edition
1992-I 2-l 5
- Photographic-grade
Photography
chemicals - Test methods -
Part 4:
Determination of residue after ignition
- Prod&s chimiques de qua/it& photographique -
Photographie
Mbthodes d’essai -
Partie 4: Dktermination du rksidu apr&s calcina tion
Reference number
IS0 10349-4: 1992(E)

---------------------- Page: 1 ----------------------
IS0 10349=4:1992(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard IS0 10349-4 was prepared by Technical Committee
ISO/TC 42, Photography.
IS0 10349 consists of the following parts, under the general title Pho-
- Photographic-grade chemicals - Test methods:
tography
- Part 7: General
- Part 2: Determination of matter insoluble in water
insoluble in ammonium hydroxide
- Part 3: Determjna Con of matter
solution
- Part 4: Determination of residue after ignition
- Part 5: De termination of heavy metals and iron con tent
- Part 6: Determination of halide content
- Part 7: Determination of alkalinity or acidity
- Part 8: Determination of volatile matter
- Part 9: Reaction to ammoniacal silver nitrate
- Part 10: Determination of sulfide con tent
0 IS0 1992
All rights reserved. No part of this publication may be reproduced or utilized in any form or
by any means, electronic or mechanical, including photocopying and microfilm, without per-
mission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland

---------------------- Page: 2 ----------------------
IS0 10349=4:1992(E)
- Part 7 7: Determination of specific gravity
- Part 12: Determination of density

---------------------- Page: 3 ----------------------
This page intentionally left blank

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD
IS0 10349-4:1992(E)
Photography - Photographic-grade chemicals
- Test
methods -
Part 4:
Determination of residue after ignition
4 Requirements
I Scope
See IS0 10349-I for requirements for reagents and
This part of IS0 10349 specifies a general tes
...