ISO/FDIS 8367-1

Packaging — Dimensional tolerances for general purpose sacks — Part 1: Paper sacks

This document specifies a set of tolerances applicable to the manufacture of paper sacks as defined in ISO 6590-1.

Emballages — Tolérances dimensionnelles des sacs d'usage général — Partie 1: Sacs en papier

La présente partie de l'ISO 8367 prescrit un ensemble de tolérances applicables à la fabrication de sacs en papier tels que définis dans l'ISO 6590-1.

General Information

• Status: Not Published
• ICS: 55.080 - Sacks. Bags
• Technical Committee: ISO/TC 122/SC 3 - Performance requirements and tests for means of packaging, packages and unit loads (as required by ISO/TC 122)
• Drafting Committee: ISO/TC 122/SC 3/WG 11 - Paper bags and paper sacks
• Current Stage: 5000 - FDIS registered for formal approval
• Start Date: 27-Mar-2026
• Completion Date: 17-Mar-2026

Relations

• Consolidates: prEN ISO 8367-1 - Packaging - Dimensional tolerances for general purpose sacks - Part 1: Paper sacks (ISO/DIS 8367-1:2025)
• Effective Date: 12-Feb-2026
• Consolidates: ISO 1888:2022 - Textile glass — Staple fibres or filaments — Determination of average diameter
• Effective Date: 05-Jul-2025
• Revises: ISO 8367-1:1993 - Packaging — Dimensional tolerances for general purpose sacks — Part 1: Paper sacks
• Effective Date: 21-Jun-2025

Standards Content (Sample)

FINAL DRAFT
International
Standard
ISO/TC 122/SC 3
Packaging — Dimensional
Secretariat: BSI
tolerances for general purpose
Voting begins on:
sacks —
2026-04-30
Part 1:
Voting terminates on:
2026-06-25
Paper sacks
Emballages — Tolérances dimensionnelles des sacs d'usage
général —
Partie 1: Sacs en papier
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/CEN PARALLEL PROCESSING LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
FINAL DRAFT
International
Standard
ISO/TC 122/SC 3
Packaging — Dimensional
Secretariat: BSI
tolerances for general purpose
Voting begins on:
sacks —
Part 1:
Voting terminates on:
Paper sacks
Emballages — Tolérances dimensionnelles des sacs d'usage
général —
Partie 1: Sacs en papier
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO 2026
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/CEN PARALLEL PROCESSING
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland Reference number
ii
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Dimensional tolerances . 1
5 Paper grammage . 2
5.1 General .2
5.2 Single paper ply grammage .2
5.3 Total sack paper plies grammage .2

iii
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is in
...

ISO/DISFDIS 8367-1:2026(en)
ISO/TC 122/SC 3/WG 11
Secretariat: BSI
Date: 2026-03-1004-15
Packaging — Dimensional tolerances for general purpose sacks — —
Part 1:
Paper sacks
Emballages — Tolérances dimensionnelles des sacs d'usage général —
Partie 1: Sacs en papier
FDIS stage
TTTTTThhihihhhiiiis drs drs drs drss d drraaaaaafffffftttttt i i i i i is s s s ss sssusususuububbbbbmmmmmmiiiiiitttttttttttteeeeeedd d d d d ttttttoooooo   aaaaaa   p pppppaaaaaarrrrrraaaaaallellellellellellel l l l l l vvvvvvooooootttttteeeeee i i i i iinnnnnn   IIIIIISSSSSSOOOOOO,,,,,,   C CCCCCEEEEEEN.N.N.N.N.N.

ISO #####-#:####(X/FDIS 8367-1:2026(en)
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,
or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO
at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
EmailE-mail: [e-mail]
Website: www.iso.org
Published in Switzerland
© ISO #### 2026 – All rights reserved
ii
ISO/DISFDIS 8367-1:2026(en)
Contents
Foreword . iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Dimensional tolerances . 1
5 Paper grammage . 2
5.1 General . 2
5.2 Single paper ply grammage . 2
5.3 Total sack paper plies grammage . 2

iii
ISO #####-#:####(X/FDIS 8367-1:2026(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of
ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights
in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s)
which may be required to implement this document. However, implementers are cautioned that this may not
represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 122, Packaging, Subcommittee SC 3,
Performance requirements and tests for means of packaging, packages and unit loads, in collaboration with the
European Committee for Standardization (CEN) Technical Committee CEN/TC 261, Packaging, in accordance
with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first
...