ISO/IEC 14443-3:2011/Amd 1:2011

Identification cards — Contactless integrated circuit cards — Proximity cards — Part 3: Initialization and anticollision — Amendment 1: Electromagnetic disturbance handling and single-size unique identifier

Cartes d'identification — Cartes à circuit(s) intégré(s) sans contact — Cartes de proximité — Partie 3: Initialisation et anticollision — Amendement 1: Gestion des perturbations électromagnétiques et identifiant unique de taille simple

General Information

• Status: Withdrawn
• Publication Date: 13-Oct-2011
• Withdrawal Date: 13-Oct-2011
• ICS: 35.240.15 - Identification cards. Chip cards. Biometrics
• Technical Committee: ISO/IEC JTC 1/SC 17 - Cards and security devices for personal identification
• Drafting Committee: ISO/IEC JTC 1/SC 17/WG 8 - Integrated circuit cards without contacts
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 27-May-2016

Relations

• Revised: ISO/IEC 14443-3:2016 - Identification cards — Contactless integrated circuit cards — Proximity cards — Part 3: Initialization and anticollision
• Effective Date: 21-Nov-2015
• Amends: ISO/IEC 14443-3:2011 - Identification cards — Contactless integrated circuit cards — Proximity cards — Part 3: Initialization and anticollision
• Effective Date: 04-Sep-2021

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 14443-3
Second edition
2011-04-15
AMENDMENT 1
2011-10-15

Identification cards — Contactless
integrated circuit cards — Proximity
cards —
Part 3:
Initialization and anticollision
AMENDMENT 1: Electromagnetic
disturbance handling and single-size unique
identifier
Cartes d'identification — Cartes à circuit(s) intégré(s) sans contact —
Cartes de proximité —
Partie 3: Initialisation et anticollision
AMENDEMENT 1: Gestion des perturbations électromagnétiques et
identifiant unique de taille simple




Reference number
ISO/IEC 14443-3:2011/Amd.1:2011(E)
©
ISO/IEC 2011

---------------------- Page: 1 ----------------------
ISO/IEC 14443-3:2011/Amd.1:2011(E)

COPYRIGHT PROTECTED DOCUMENT


©  ISO/IEC 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO/IEC 2011 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 14443-3:2011/Amd.1:2011(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as
an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to ISO/IEC 14443-3:2011 was prepared by Joint Technical Committee ISO/IEC JTC 1,
Information technology, Subcommittee SC 17, Cards and personal identification.

© ISO/IEC 2011 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/IEC 14443-3:2011/Amd.1:2011(E)

Identification cards — Contactless integrated circuit cards —
Proximity cards —
Part 3:
Initialization and anticollision
AMENDMENT 1: Electromagnetic disturbance handling and
single-size unique identifier
Page 4, Clause 4
Insert the following new symbols between SOF and TR0:
t Low EMD time, PICC
E,PICC
t Low EMD time, PCD
E,PCD
Page 7, 6.2.1.1
Replace Figure 1 with the following:
Last data bit transmitted by PCD First modulation of PICC

FDT
t
1 etu 2 etu E, PICC
logic "1" End of communication Start of
(E) communication (S)
FDT
t
1 etu 2 etu E, PICC
logic "0" End of communication Start of
(E) communication (S)

NOTE t is specified in Clause 8.
E,PICC
Figure 1 — Frame delay time PCD to PICC
© ISO/IEC 2011 – All rights reserved 1

---------------------- Page: 4 ----------------------
ISO/IEC 14443-3:2011/Amd.1:2011(E)
Page 22, 6.5.4
Replace Table 11 with the following:

Table 11 — Single size UIDs
uid0 Description
'08' uid1 to uid3 is a random number which is dynamically generated
'X0' - 'X7', 'X9' - 'XE', Proprietary number
'18', '28', '38', '48', '58', '68', '78', '98',
'A8', 'B8', 'C8', 'D8', 'E8'
'F8' RFU
'XF' Fixed number, non-unique

Page 27, 7.1.6
Replace Figure 17 with the following:



PCD Last character EOF Unmodulated carrier

TR0 TR1
PICC

...