ISO 14300-2:2011

Space systems — Programme management — Part 2: Product assurance

ISO 14300-2:2011 defines the product assurance (PA) policy, objectives, principles, and requirements for the establishment and implementation of PA programmes for space programmes covering mission definition, design, development, production and operations of space products, including disposal. The PA discipline covers: PA management, quality assurance, safety assurance, dependability (reliability, availability and maintainability) assurance of software and hardware products, as well as parts (including electrical, electromechanical and electronic components, and mechanical parts), materials and processes assurance. ISO 14300-2:2011 defines their respective objectives, policies, and principles to achieve the stated overall PA objectives throughout the complete life cycle of the products. The provisions of ISO 14300-2:2011 apply to space products.

Systèmes spatiaux — Management de programme — Partie 2: Assurance produit

General Information

• Status: Withdrawn
• Publication Date: 11-Sep-2011
• ICS: 49.140 - Space systems and operations
• Technical Committee: ISO/TC 20/SC 14 - Space systems and operations
• Drafting Committee: ISO/TC 20/SC 14/WG 5 - Space System Program Management and Quality
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 01-Nov-2023

Relations

• Revised: ISO 14300-2:2023 - Space systems — Programme management — Part 2: Product assurance
• Effective Date: 18-Feb-2023
• Revises: ISO 14300-2:2002 - Space systems — Programme management — Part 2: Product assurance
• Effective Date: 23-Oct-2010

Standards Content (Sample)

INTERNATIONAL  ISO
STANDARD 14300-2
Second edition
2011-09-15
Space systems — Programme
management —
Part 2:
Product assurance
Systèmes spatiaux — Management de programmes —
Partie 2: Assurance produit
Reference number
ISO 14300-2:2011(E)
©
 ISO 2011

---------------------- Page: 1 ----------------------
ISO 14300-2:2011(E)
COPYRIGHT PROTECTED DOCUMENT
©  ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 14300-2:2011(E)
Contents Page
Foreword . v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 1
3.1 Terms and definitions . 1
3.2 Abbreviated terms . 2
4 Objectives, policy and principles — General . 2
4.1 Objectives . 2
4.2 Policy and principles . 2
5 Product assurance management . 2
5.1 Objective . 2
5.2 Policy and principles . 3
5.3 Requirements . 3
6 Quality assurance . 5
6.1 Objective . 5
6.2 Policy and principles . 5
7 Safety assurance . 6
7.1 Objective . 6
7.2 Policy and principles . 6
8 Dependability assurance . 7
8.1 Objective . 7
8.2 Policy and principles . 7
9 Parts, materials and processes .
...