ISO 14300-2:2023

Space systems — Programme management — Part 2: Product assurance

This document defines the product assurance (PA) policy, objectives, principles, and requirements for the establishment and implementation of PA programmes for space programmes covering mission definition, design, development, production and operations of space products, including disposal. The PA discipline covers: PA management, quality assurance, safety assurance, dependability (reliability, availability and maintainability), assurance of software and hardware products, as well as parts (including electrical, electromechanical and electronic components, and mechanical parts), materials and processes assurance. This document defines their respective objectives, policies, and principles to achieve the stated overall PA objectives throughout the complete life cycle of the products. This document applies to space products.

Systèmes spatiaux — Management de programme — Partie 2: Assurance produit

General Information

• Status: Published
• Publication Date: 31-Oct-2023
• ICS: 49.140 - Space systems and operations
• Technical Committee: ISO/TC 20/SC 14 - Space systems and operations
• Drafting Committee: ISO/TC 20/SC 14 - Space systems and operations
• Current Stage: 6060 - International Standard published
• Start Date: 01-Nov-2023
• Due Date: 15-Feb-2025
• Completion Date: 01-Nov-2023

Relations

• Revises: ISO 14300-2:2011 - Space systems — Programme management — Part 2: Product assurance
• Effective Date: 18-Feb-2023

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 14300-2
Third edition
2023-11
Space systems — Programme
management —
Part 2:
Product assurance
Systèmes spatiaux — Management de programme —
Partie 2: Assurance produit
Reference number
ISO 14300-2:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 14300-2:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 14300-2:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 2
3.1 Terms and definitions . 2
3.2 Abbreviated terms . 2
4 Objectives, policy and principles — General . 2
4.1 Objectives . 2
4.2 Policy and principles . 2
5 Product assurance management .3
5.1 Objective. 3
5.2 Policy and principles . 3
5.3 Requirements . 4
5.3.1 Responsibility and authority . 4
5.3.2 Resources . 4
5.3.3 Product assurance programme management . 4
5.3.4 Contractual aspects . 4
5.3.5 Risk assessment and control . 5
6 Quality assurance .
...

INTERNATIONAL ISO
STANDARD 14300-2
Third edition
Space systems — Programme
management —
Part 2:
Product assurance
Systèmes spatiaux — Management de programme —
Partie 2: Assurance produit
PROOF/ÉPREUVE
Reference number
ISO 14300-2:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 14300-2:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
PROOF/ÉPREUVE © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 14300-2:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 2
3.1 Terms and definitions . 2
3.2 Abbreviated terms . 2
4 Objectives, policy and principles — General . 2
4.1 Objectives . 2
4.2 Policy and principles . 2
5 Product assurance management .3
5.1 Objective. 3
5.2 Policy and principles . 3
5.3 Requirements . 4
5.3.1 Responsibility and authority . 4
5.3.2 Resources . 4
5.3.3 Product assurance programme management . 4
5.3.4 Contractual aspects . 4
5.3.5 Risk assessment and control . 5
6 Quality assurance .
...

ISO/PRF 14300-2
ISO/TC 20/SC 14
ISO 14300-2:2023(E)
Secretariat: ANSI/AIAA
Third edition
Date: 2023-07-1109-12
Space systems — Programme management —
Part 2:
Product assurance
Systèmes spatiaux — Management de programmes — programme —
Partie 2: Assurance produit
FDIS stage

---------------------- Page: 1 ----------------------
ISO/PRF 14300-2:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
EmailE-mail: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
© ISO 2023 – All rights reserved
ii
 © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/PRF 14300-2:2023(E)
Contents Page
Foreword . v
Introduction .vi i
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 2
3.1 Terms and definitions . 2
3.2 Abbreviated terms . 2
4 Objectives, policy and principles — General . 2
4.1 Objectives . 2
4.2 Policy and principles . 3
5 Product assurance management . 3
5.1 Objective . 3
5.2 Policy and principles . 3
5.3 Requirements . 4
5.3.1 Responsibility and authority . 4
5.3.2 Resources . 4
5.3.3 Product assurance programme management . 5
5.3.4 Contractual aspects . 5
5.3.5 Risk assessment and control . 5
6 Quality assurance . 7
6.1 Objective . 7
6.2 Policy and principles
...