ISO 19209:2017

Adhesives — Classification of thermoplastic wood adhesives for non-structural applications

ISO 19209:2017 classifies thermoplastic resin-based wood adhesives for non-structural applications into durability classes D1 to D4 based on the dry and wet strengths of bond lines measured under specified conditions after various conditioning treatments. For special applications, further tests that do not fall within the scope of ISO 19209:2017 can be applicable. The adhesives specified in ISO 19209:2017 are suitable for the bonding of furniture and interior structures, panelling, doors, windows, stairs, etc. made of wood or derived timber products. ISO 19209:2017 does not specify the temperature resistance of bond lines.

Adhésifs — Classification des colles thermoplastiques pour bois à usages non structuraux

General Information

• Status: Published
• Publication Date: 26-Jul-2017
• ICS: 83.180 - Adhesives
• Technical Committee: ISO/TC 61/SC 11 - Products
• Drafting Committee: ISO/TC 61/SC 11 - Products
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 31-Aug-2022

Relations

• Parent: ISO 12402-4:2006 - Personal flotation devices — Part 4: Lifejackets, performance level 100 — Safety requirements
• Effective Date: 06-Jun-2022
• Consolidated By: ISO 9090:2019 - Gas tightness of equipment for gas welding and allied processes
• Effective Date: 06-Jun-2022

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 19209
First edition
2017-07
Adhesives — Classification of
thermoplastic wood adhesives for
non-structural applications
Adhésifs — Classification des colles thermoplastiques pour bois à
usages non structuraux
Reference number
ISO 19209:2017(E)
©
ISO 2017

---------------------- Page: 1 ----------------------
ISO 19209:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 19209:2017(E)

Contents  Page
Foreword .iv
Introduction .v
1  Scope . 1
2  Normative references . 1
3  Terms and definitions . 1
4  Classification . 2
5  Test method . 2
6  Requirements . 2
Bibliography . 4
© ISO 2017 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 19209:2017(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO’s adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: w w w . i s o .org/ iso/ foreword .html.
ISO 19209 was prepared by CEN/TC 193 as EN 204:2016 and was adopted (without modification) by
Technical Committee ISO/TC 61, Plastics, Subcommittee SC 11, Products.
iv © ISO 2017 – All rights reserved

---------------------- Page: 4 ----------------------
ISO 19209:2017(E)

Introduction
International Standards giving a common classification with respect to durability classes for wood
adhesives allow considerable improvement in consumer protection in any future product liability
system with regard to properties guaranteed by the adhesive manufacturer.
© ISO 2017 – All rights reserved v

---------------------- Page: 5 ----------------------
INTERNATIONAL STANDARD ISO 19209:2017(E)
Adhesives — Classification of thermoplastic wood
adhesives for non-structural applications
1  Scope
This document classifies thermoplastic resin-based wood adhesives for non-structural applications into
durability classes D1 to D4 based o
...