Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas — Amendment 1

Amandma A1:2010 je dodatek k standardu SIST ISO 7010:2010.
This International Standard prescribes safety signs for the purposes of accident prevention, fire protection, health hazard information and emergency evacuation. The shape and colour of each safety sign are according to ISO 3864-1 and the design of the graphical symbols is according to ISO 3864-3. This International Standard is applicable to all locations where safety issues related to people need to be addressed. However, it is not applicable to the signalling used for guiding rail, road, river, maritime and air traffic and, in general, to those sectors subject to a regulation which may differ with regard to certain points of this International Standard and of the ISO 3864 series. This International Standard specifies the safety sign originals that may be scaled for reproduction and application purposes.

Symboles graphiques — Couleurs de sécurité et signaux de sécurité — Signaux de sécurité utilisés sur les lieux de travail et dans les lieux publics — Amendement 1

Grafični simboli - Opozorilne barve in opozorilni znaki - Opozorilni znaki, ki se uporabljajo na delovnih in javnih območjih - Dopolnilo 1

Amandma A1:2010 je dodatek k standardu SIST ISO 7010:2010.
Ta mednarodni standard predpisuje opozorilne znake za namene preprečevanja nesreč, protipožarne zaščite, informacij o nevarnostih za zdravje in evakuacije v nujnih primerih. Oblika in barva vsakega opozorilnega znaka sta v skladu z ISO 3864-1 in oblika grafičnih simbolov je v skladu z ISO 3864-3. Ta mednarodni standard velja za vse lokacije, kjer se obravnavajo vprašanja, povezana z varnostjo ljudmi. Vendar ne velja za signalizacijo, ki se uporablja za upravljanje železniških prog, cest, rek, pomorskega in zračnega prometa ter na splošno za sektorje, ki so predmet ureditve, katera se lahko razlikuje glede določenih točk tega mednarodnega standarda in serije ISO 3864. Ta mednarodni standard opredeljuje originalne opozorilne znake, ki so lahko merilo za namene ponovnega proizvajanja in rabe.

General Information

Status
Withdrawn
Publication Date
06-Mar-2006
Withdrawal Date
06-Mar-2006
Current Stage
9599 - Withdrawal of International Standard
Completion Date
27-May-2011

Relations

Buy Standard

Standard
ISO 7010:2003/Amd 1:2006
English language
12 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 7010:2003/Amd 1:2006
English language
12 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 7010:2003/Amd 1:2006
French language
12 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 7010:2003/Amd 1:2006
French language
12 pages
sale 15% off
Preview
sale 15% off
Preview
Amendment
ISO 7010:2010/Amd 1:2010 - BARVE
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 7010
First edition
2003-10-01
AMENDMENT 1
2006-03-01

Graphical symbols — Safety colours and
safety signs — Safety signs used in
workplaces and public areas
AMENDMENT 1
Symboles graphiques — Couleurs de sécurité et signaux de sécurité —
Signaux de sécurité utilisés sur les lieux de travail et dans les lieux
publics
AMENDEMENT 1




Reference number
ISO 7010:2003/Amd.1:2006(E)
©
ISO 2006

---------------------- Page: 1 ----------------------
ISO 7010:2003/Amd.1:2006(E)

PDF disclaimer
PDF files may contain embedded typefaces. In accordance with Adobe's licensing policy, such files may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading a PDF file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create the PDF file(s) constituting this document can be found in the General Info relative to
the file(s); the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the files are suitable for
use by ISO member bodies. In the unlikely event that a problem relating to them is found, please inform the Central Secretariat at the
address given below.

This CD-ROM contains the publication ISO 7010:2003/Amd.1:2006 in portable document format (PDF), which
can be viewed using Adobe® Acrobat® Reader.
Adobe and Acrobat are trademarks of Adobe Systems Incorporated.
IMPORTANT — The colours represented in the electronic file of this International Standard can be
neither viewed on screen nor printed as true representations. For colour-matching purposes, please
consult ISO 3864-1 which provides colorimetric and photometric properties together with, as a
guideline, references from colour order systems.

©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this CD-ROM may be reproduced, stored in a retrieval system or transmitted in
any form or by any means without p
...

INTERNATIONAL ISO
STANDARD 7010
First edition
2003-10-01
AMENDMENT 1
2006-03-01


Graphical symbols — Safety colours and
safety signs — Safety signs used in
workplaces and public areas
AMENDMENT 1
Symboles graphiques — Couleurs de sécurité et signaux de sécurité —
Signaux de sécurité utilisés sur les lieux de travail et dans les lieux
publics
AMENDEMENT 1




Reference number
ISO 7010:2003/Amd.1:2006(E)
©
ISO 2006

---------------------- Page: 1 ----------------------
ISO 7010:2003/Amd.1:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2006 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 7010:2003/Amd.1:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to ISO 7010:2003 was prepared by Technical Committee ISO/TC 145, Graphical symbols,
Subcommittee SC 2, Safety identification, signs, shapes, symbols and colours.

© ISO 2006 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 7010:2003/Amd.1:2006(E)

Graphical symbols — Safety colours and safety signs — Safety
signs used in workplaces and public areas
AMENDMENT 1
IMPORTANT — The colours represented in the electronic file of this International Standard can be
neither viewed on screen nor printed as true representations. For colour-matching purposes, please
consult ISO 3864-1 which provides colorimetric and photometric properties together with, as a
guideline, references from colour order systems.
Add the following safety signs:
⎯ E007: Evacuation assembly point
⎯ E008: Break to obtain access
⎯ E009: Doctor
⎯ M002: Refer to instruction manual/booklet
⎯ P011: Do not extinguish with water
⎯ W012: Warning; Electricity
⎯ W013: Warning; Guard dog
⎯ W014: Warning; Fork lift trucks and other industrial vehicles
⎯ W015: Warning; Overhead load
⎯ W016: Warning; Toxic material
⎯ W017: Warning; Hot surface
© ISO 2006 – All rights reserved 1

---------------------- Page: 4 ----------------------
ISO 7010:2003/Amd.1:2006(E)
Safety sign E007: Evacuation assembly point
Reference
No. Safety sign Description/application
Referent
To signify the location of an
Function assembly point following
evacuation
Two human figures and a head
Image of a third figure in a group, four
content
white arrows coming from the
corners pointing to them
Field of For everyday use in workplaces
application and public areas
Safety signing
Format of

application
Safety manuals and notices
E007
Test data obtained according to
Evacuation
ISO 9186:2001 are not available
assembly
from more than one country.
point
Findings from national testing,
however, showed that the
graphical symbol did not reach
the criteria of acceptability.
Consequently, a supplementary
Additional
text sign shall be used to
information
increase comprehension except
when the safety sign is
supplemented by manuals,

instructions or training.
NOTE — The criteria of acceptability
adopted by ISO/TC 145/SC 2 are
given on the website:
www.iso.org/tc145/sc2.

2 © ISO 2006 – All rights reserved

---------------------- Page: 5 ----------------------
ISO 7010:2003/Amd.1:2006(E)
Safety sign E008: Break to obtain access
Reference
No. Safety sign Description/application
Referent
To signify a glass cover which
requires breaking to obtain
Function
access to an emergency exit
device
Image Human fist with bar surrounded
content
by a white field shaped like a star
Field of
For everyday use in workplaces
application and public areas
Safety signing
Format of

application
Safety manuals and notices
E008
Test data obtained according to
Break to
ISO 9186:2001 are not available
obtain
from more than one country.
access
Findings from national testing,
however, showed that the
graphical symbol did not reach
the criteria of acceptability.
Additional
Consequently, a supplementary
information
text sign shall be used to increase
comprehension except when the
safety sign is supplemented by
manuals, instructions or training.
NOTE — The criteria of acceptability
adopted by ISO/TC 145/SC 2 are
given on the website:
www.iso.org/tc145/sc2.

© ISO 2006 – All rights reserved 3

---------------------- Page: 6 ----------------------
ISO 7010:2003/Amd.1:2006(E)
Safety sign E009: Doctor
Reference
No. Safety sign Description/application
Referent
To signify the location of a doctor
Function
for emergencies
Upper human figure with
stethoscope, with determinative
Image
cross or another appropriate
content
element evocative for the target
group
Field of For everyday use in workplaces
application
and public areas
Safety signing
Format of
E009

application
Safety manuals and notices
Doctor
Test data obtained according to
ISO 9186:2001 are not available.
Consequently, a supplementary
text sign shall be used to increase
comprehension except when the
safety sign is supplemented by
Additional
manuals, instructions or training.
information

NOTE — The criteria of acceptability
adopted by ISO/TC 145/SC 2 are
given on the website:
www.iso.org/tc145/sc2.

4 © ISO 2006 – All rights reserved

---------------------- Page: 7 ----------------------
ISO 7010:2003/Amd.1:2006(E)
Safety sign M002: Refer to instruction manual/booklet
Ref
...

NORME ISO
INTERNATIONALE 7010
Première édition
2003-10-01
AMENDEMENT 1
2006-03-01



Symboles graphiques — Couleurs de
sécurité et signaux de sécurité —
Signaux de sécurité utilisés sur les lieux
de travail et dans les lieux publics
AMENDEMENT 1
Graphical symbols — Safety colours and safety signs — Safety signs
used in workplaces and public areas
AMENDMENT 1



Numéro de référence
ISO 7010:2003/Amd.1:2006(F)
©
ISO 2006

---------------------- Page: 1 ----------------------
ISO 7010:2003/Amd.1:2006(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.


©  ISO 2006
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse

ii © ISO 2006 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 7010:2003/Amd.1:2006(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne
pas avoir identifié de tels droits de propriété et averti de leur existence.
L'Amendement 1 à l'ISO 7010:2003 a été élaboré par le comité technique ISO/TC 145, Symboles graphiques
et pictogrammes, sous-comité SC 2, Identification de sécurité, signaux, formes, symboles et couleurs.

© ISO 2006 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 7010:2003/Amd.1:2006(F)

Symboles graphiques — Couleurs de sécurité et signaux de
sécurité — Signaux de sécurité utilisés sur les lieux de travail et
dans les lieux publics
AMENDEMENT 1
IMPORTANT — Les couleurs représentées dans le fichier électronique de la présente Norme
internationale ne peuvent être considérées comme représentation réelle ni à l'affichage à l'écran, ni à
l'impression. À des fins de comparaison de couleurs, consulter l'ISO 3864-1 qui fournit des
caractéristiques colorimétriques et photométriques ainsi que, à titre d'indication, des références à des
systèmes de classification des couleurs.
Ajouter les signaux de sécurité suivants:
⎯ E007: Point de rassemblement après évacuation
⎯ E008: Casser pour obtenir l'accès
⎯ E009: Médecin
⎯ M002: Prendre connaissance du mode d'emploi/manuel
⎯ P011: Ne pas éteindre avec de l'eau
⎯ W012: Danger; Électricité
⎯ W013: Danger; Chien de garde
⎯ W014: Danger; Chariots élévateurs à fourche et autres véhicules industriels
⎯ W015: Danger; Charge suspendue
⎯ W016: Danger; Matière toxique
⎯ W017: Danger; Surface chaude

© ISO 2006 – Tous droits réservés 1

---------------------- Page: 4 ----------------------
ISO 7010:2003/Amd.1:2006(F)
Signal de sécurité E007: Point de rassemblement après évacuation
N° de
référence Signal de sécurité Description/application
Référent
Pour spécifier la localisation
Fonction d'un point de rassemblement
après évacuation
Deux formes humaines et la
tête d’une troisième forme
Contenu
humaine, en groupe, quatre
graphique flèches blanches tracées à
partir des coins et pointant
vers elles
Utilisation quotidienne sur
Domaine
les lieux de travail et dans
d'application
les lieux publics
Signalisation de sécurité
Type
d'application Manuels et instructions de
E007 sécurité
Point de Des résultats d'essai obtenus
rassem- conformément à
blement l'ISO 9186:2001 n'ont pas été
après mis à disposition par plus
évacua- d'un pays. Cependant, les
tion résultats de l'essai national
montrent que le symbole
graphique n'atteint pas les
critères d'acceptabilité. En
conséquence, un signal
d'information additionnelle
Information
complémentaire doit être utilisé pour
augmenter la compréhension

sauf si le signal de sécurité
est accompagné de manuels,
d'instructions ou de
formation.
NOTE — Les critères
d'acceptabilité adoptés par
l'ISO/TC 145/SC 2 sont donnés
sur le site Web:
www.iso.org/tc145/sc2

2 © ISO 2006 – Tous droits réservés

---------------------- Page: 5 ----------------------
ISO 7010:2003/Amd.1:2006(F)
Signal de sécurité E008: Casser pour obtenir l'accès
N° de
référence Signal de sécurité Description/application
Référent
Pour signifier qu'un
couvercle en verre doit être
Fonction
cassé pour obtenir l'accès à
un dispositif d'évacuation
d'urgence
Poing humain avec barre
Contenu
entouré d'une zone blanche
graphique
de la forme d'une étoile
Utilisation quotidienne sur
Domaine
les lieux de travail et dans
d'application
les lieux publics
Signalisation de sécurité
Type

d'application Manuels et instructions de
sécurité
E008
Des résultats d'essai obtenus
conformément à
Casser
l'ISO 9186:2001 n'ont pas été
pour
mis à disposition par plus
obtenir
d'un pays. Cependant, les
l'accès
résultats de l'essai national
montrent que le symbole
graphique n'atteint pas les
critères d'acceptabilité. En
conséquence, un signal
d'information additionnelle
Information
doit être utilisé pour
complémentaire
augmenter la compréhension
sauf si le signal de sécurité
est accompagné de manuels,
d'instructions ou de
formation.
NOTE — Les critères
d'acceptabilité adoptés par
l'ISO/TC 145/SC 2 sont donnés
sur le site Web:
www.iso.org/tc145/sc2

© ISO 2006 – Tous droits réservés 3

---------------------- Page: 6 ----------------------
ISO 7010:2003/Amd.1:2006(F)
Signal de sécurité E009: Médecin
N° de
référence Signal de sécurité Description/application
Référent
Pour signifier la localisation
Fonction
d'un médecin pour les
urgences
Partie supérieure d'une
forme humaine avec un
stéthoscope, avec la croix
Contenu
d'identification ou tout
graphique
autre élément approprié
évocateur pour les groupes
culturels concernés
Utilisation quotidienne sur
Domaine
les lieux de travail et dans
d'application
les lieux publics
Signalisation de sécurité
Type

d'application Manuels et instructions de
E009
sécurité
Médecin
Des résultats d'essai
obtenus conformément à
l'ISO 9186:2001 ne sont
pas disponibles. En
conséquence, un signal
d'information additionnelle
doit être utilisé pour
augmenter la
compréhension sauf si le
Information
signal de sécurité est
complémentaire
accompagné de manuels,
d'instructions ou de
formation.
NOTE — Les critères
d'acceptabilité adoptés par
l'ISO/TC 145/SC 2 sont donnés
sur le site Web:
www.iso.org/tc145/sc2

4 © ISO 2006 – Tous droits réservés

---------------------- Page: 7 ----------------------
ISO 7010:2003/Amd.1:2006(F)
Signal de sécurité M002: Prendre connaissance du mode d'emploi/manuel
N° de
référence Signa
...

NORME ISO
INTERNATIONALE 7010
Première édition
2003-10-01
AMENDEMENT 1
2006-03-01

Symboles graphiques — Couleurs de
sécurité et signaux de sécurité —
Signaux de sécurité utilisés sur les lieux
de travail et dans les lieux publics
AMENDEMENT 1
Graphical symbols — Safety colours and safety signs — Safety signs
used in workplaces and public areas
AMENDMENT 1




Numéro de référence
ISO 7010:2003/Amd.1:2006(F)
©
ISO 2006

---------------------- Page: 1 ----------------------
ISO 7010:2003/Amd.1:2006(F)

PDF – Exonération de responsabilité
Les fichiers PDF peuvent contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ils peuvent
être imprimés ou visualisés, mais ne doivent pas être modifiés à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de fichiers PDF, les parties
concernées acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO
décline toute responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du ou des fichiers PDF qui constituent cette publication sont
disponibles dans la rubrique General Info des fichiers; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les
mesures ont été prises pour garantir l'exploitation de ces fichiers par les comités membres de l'ISO. Dans le cas peu probable où
surviendrait un problème d'utilisation, veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.

Le présent CD-ROM contient la publication ISO 7010:2003/Amd.1:2006 au format PDF (portable document
format), qui peut être visualisée en utilisant Adobe® Acrobat® Reader.
Adobe et Acrobat sont des marques déposées de Adobe Systems Incorporated.

IMPORTANT — Les couleurs représentées dans le fichier électronique de la présente Norme
internationale ne peuvent être considérées comme représentation réelle ni à l'affichage à l'écran, ni à
l'impression. À des fins de comparaison de couleurs, consulter l'ISO 3864-1 qui fournit des
caractéristiques colorimétriques et photométriques ainsi que, à titre d'indication, des références à
des systèmes de classification des couleurs.

©  ISO 2006
Tous droits réservés. Sauf prescription différente, aucune partie de ce CD-ROM ne peut être reproduite, enregistrée dans un système
...

SLOVENSKI STANDARD
SIST ISO 7010:2010/Amd 1:2010
01-januar-2010
*UDILþQLVLPEROL2SR]RULOQHEDUYHLQRSR]RULOQL]QDNL2SR]RULOQL]QDNLNLVH
XSRUDEOMDMRQDGHORYQLKLQMDYQLKREPRþMLK'RSROQLOR
Graphical symbols - Safety colours and safety signs - Safety signs used in workplaces
and public areas - AMENDMENT 1
Signaux de sécurité utilisés sur les lieux de travail et dans les lieux publics -
AMENDEMENT 1
Ta slovenski standard je istoveten z: ISO 7010:2003/Amd 1:2006
ICS:
01.080.10 Simboli za javne informacije Public information symbols
13.200 3UHSUHþHYDQMHQHVUHþLQ Accident and disaster control
NDWDVWURI
SIST ISO 7010:2010/Amd 1:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 7010:2010/Amd 1:2010

---------------------- Page: 2 ----------------------

SIST ISO 7010:2010/Amd 1:2010


INTERNATIONAL ISO
STANDARD 7010
First edition
2003-10-01
AMENDMENT 1
2006-03-01


Graphical symbols — Safety colours and
safety signs — Safety signs used in
workplaces and public areas
AMENDMENT 1
Symboles graphiques — Couleurs de sécurité et signaux de sécurité —
Signaux de sécurité utilisés sur les lieux de travail et dans les lieux
publics
AMENDEMENT 1




Reference number
ISO 7010:2003/Amd.1:2006(E)
©
ISO 2006

---------------------- Page: 3 ----------------------

SIST ISO 7010:2010/Amd 1:2010
ISO 7010:2003/Amd.1:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2006 – All rights reserved

---------------------- Page: 4 ----------------------

SIST ISO 7010:2010/Amd 1:2010
ISO 7010:2003/Amd.1:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to ISO 7010:2003 was prepared by Technical Committee ISO/TC 145, Graphical symbols,
Subcommittee SC 2, Safety identification, signs, shapes, symbols and colours.

© ISO 2006 – All rights reserved iii

---------------------- Page: 5 ----------------------

SIST ISO 7010:2010/Amd 1:2010

---------------------- Page: 6 ----------------------

SIST ISO 7010:2010/Amd 1:2010
ISO 7010:2003/Amd.1:2006(E)

Graphical symbols — Safety colours and safety signs — Safety
signs used in workplaces and public areas
AMENDMENT 1
IMPORTANT — The colours represented in the electronic file of this International Standard can be
neither viewed on screen nor printed as true representations. For colour-matching purposes, please
consult ISO 3864-1 which provides colorimetric and photometric properties together with, as a
guideline, references from colour order systems.
Add the following safety signs:
⎯ E007: Evacuation assembly point
⎯ E008: Break to obtain access
⎯ E009: Doctor
⎯ M002: Refer to instruction manual/booklet
⎯ P011: Do not extinguish with water
⎯ W012: Warning; Electricity
⎯ W013: Warning; Guard dog
⎯ W014: Warning; Fork lift trucks and other industrial vehicles
⎯ W015: Warning; Overhead load
⎯ W016: Warning; Toxic material
⎯ W017: Warning; Hot surface
© ISO 2006 – All rights reserved 1

---------------------- Page: 7 ----------------------

SIST ISO 7010:2010/Amd 1:2010
ISO 7010:2003/Amd.1:2006(E)
Safety sign E007: Evacuation assembly point
Reference
No. Safety sign Description/application
Referent
To signify the location of an
Function assembly point following
evacuation
Two human figures and a head
Image of a third figure in a group, four
content
white arrows coming from the
corners pointing to them
Field of For everyday use in workplaces
application and public areas
Safety signing
Format of

application
Safety manuals and notices
E007
Test data obtained according to
Evacuation
ISO 9186:2001 are not available
assembly
from more than one country.
point
Findings from national testing,
however, showed that the
graphical symbol did not reach
the criteria of acceptability.
Consequently, a supplementary
Additional
text sign shall be used to
information
increase comprehension except
when the safety sign is
supplemented by manuals,

instructions or training.
NOTE — The criteria of acceptability
adopted by ISO/TC 145/SC 2 are
given on the website:
www.iso.org/tc145/sc2.

2 © ISO 2006 – All rights reserved

---------------------- Page: 8 ----------------------

SIST ISO 7010:2010/Amd 1:2010
ISO 7010:2003/Amd.1:2006(E)
Safety sign E008: Break to obtain access
Reference
No. Safety sign Description/application
Referent
To signify a glass cover which
requires breaking to obtain
Function
access to an emergency exit
device
Image Human fist with bar surrounded
content
by a white field shaped like a star
Field of
For everyday use in workplaces
application and public areas
Safety signing
Format of

application
Safety manuals and notices
E008
Test data obtained according to
Break to
ISO 9186:2001 are not available
obtain
from more than one country.
access
Findings from national testing,
however, showed that the
graphical symbol did not reach
the criteria of acceptability.
Additional
Consequently, a supplementary
information
text sign shall be used to increase
comprehension except when the
safety sign is supplemented by
manuals, instructions or training.
NOTE — The criteria of acceptability
adopted by ISO/TC 145/SC 2 are
given on the website:
www.iso.org/tc145/sc2.

© ISO 2006 – All rights reserved 3

---------------------- Page: 9 ----------------------

SIST ISO 7010:2010/Amd 1:2010
ISO 7010:2003/Amd.1:2006(E)
Safety sign E009: Doctor
Reference
No. Safety sign Description/application
Referent
To signify the location of a doctor
Function
for emergencies
Upper human figure with
stethoscope, with determinative
Image
cross or another appropriate
content
element evocative for the target
group
Field of For everyday use in workplaces
application
and public areas
Safety signing
Format of
E009

application
Safety manuals and notic
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.