iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 13100

(Main)

Methods for zeta potential determination — Streaming potential and streaming current methods for porous materials

Methods for zeta potential determination — Streaming potential and streaming current methods for porous materials

Méthodes pour la détermination du potentiel zêta — Méthodes de potentiel d’écoulement/courant d’écoulement pour les matériaux poreux

General Information

Status
Not Published
ICS
19.120 - Particle size analysis. Sieving
Technical Committee
ISO/TC 24/SC 4 - Particle characterization
Drafting Committee
ISO/TC 24/SC 4/WG 17 - Methods for zeta potential determination
Current Stage
6000 - International Standard under publication
Completion Date
20-Feb-2024
Ref Project

Buy Standard

ISO/PRF 13100 - Methods for zeta potential determination — Streaming potential and streaming current methods for porous materials Released:23. 01. 2024ISO/PRF 13100 - Methods for zeta potential determination — Streaming potential and streaming current methods for porous materials Released:23. 01. 2024
PreviousNext
Draft
ISO/PRF 13100 - Methods for zeta potential determination — Streaming potential and streaming current methods for porous materials Released:23. 01. 2024
English language
29 pages
sale 15% off
Preview
sale 15% off
Preview
REDLINE ISO/PRF 13100 - Methods for zeta potential determination — Streaming potential and streaming current methods for porous materials Released:23. 01. 2024REDLINE ISO/PRF 13100 - Methods for zeta potential determination — Streaming potential and streaming current methods for porous materials Released:23. 01. 2024
PreviousNext
Draft
REDLINE ISO/PRF 13100 - Methods for zeta potential determination — Streaming potential and streaming current methods for porous materials Released:23. 01. 2024
English language
29 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

International
Standard
ISO 13100
First edition
Methods for zeta potential
determination — Streaming
potential and streaming current
methods for porous materials
Méthodes pour la détermination du potentiel zêta — Méthodes de
potentiel d’écoulement/courant d’écoulement pour les matériaux
poreux
PROOF/ÉPREUVE
Reference number
ISO 13100:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
ISO 13100:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
PROOF/ÉPREUVE
© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO 13100:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 Terms related to the electric double layer and the zeta potential .1
3.2 Terms related to electrokinetic and electroacoustic phenomena .2
3.3 Terms related to porous materials .4
4 Symbols . 5
5 Streaming current and streaming potential . 6
5.1 General overview .6
5.2 Streaming potential in DC mode .7
5.2.1 General .7
5.2.2 Measurement of the streaming potential coupling coefficient .7
5.2.3 Calculation of the zeta potential.8
5.3 Streaming current in AC mode .9
6 Measurement of DC streaming potential for porous materials .11
6.1 Operational procedures .11
6.2 Instrument location . 1
...

ISO/PRF 13100:2023(E)
ISO/TC 24/SC 4/WG 17
Secretariat: BSI
Date: 2024-01-22
Methods for zeta potential determination — Streaming potential
and streaming current methods for porous materials
Méthodes pour la détermination du potentiel zêta — Méthodes de potentiel d’écoulement/courant
d’écoulement pour les matériaux poreux
First edition

---------------------- Page: 1 ----------------------
PROOF

---------------------- Page: 2 ----------------------
ISO/DISPRF 13100:2023(E2024(en)
© ISO 20232024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,
or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO
at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel.Phone: + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail: copyright@iso.org
Website: www.iso.org
Published in Switzerland
© ISO 2024 – All rights reserved

iii
© ISO 2023 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/DISPRF 13100:2023(E2024(en)
Contents Page
Foreword .vi i
Introduction . viii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 Terms related to the electric double layer and the zeta potential . 1
3.2 Terms related to electrokinetic and electroacoustic phenomena . 2
3.3 Terms related to porous materials . 4
4 Symbols . 5
5 Streaming current and streaming potential . 6
5.1 General overview . 6
5.2 Streaming potential in DC mode . 7
5.2.1 General . 7
5.2.2 Measurement of the streaming potential coupling coefficient . 7
5.2.3 Calculation of the zeta potential . 9
5.3 Streaming current in AC mode . 9
6 Measurement of DC streaming potential for porous materials . 13
6.1 Operational procedures . 13
6.2 Instrument location . 15
6.3 Sample holder .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 13319-2:2023(Main)
Determination of particle size distribution — Electrical sensing zone method — Part 2: Tunable resistive pulse sensing method

This document specifies the measurements of particle size distribution and concentration of suspended particles, ranging from 40 nm to 100 µm, using tunable resistive pulse sensing (TRPS). This document provides a comprehensive overview of the methodologies that are applied to achieve reproducible and accurate TRPS measurement results. This document also includes best practice considerations, possible pitfalls and information on how to alleviate or avoid these pitfalls.

  • Standard
    22 pages
    English language
    sale 15% off
  • Draft
    20 pages
    English language
    sale 15% off
  • Draft
    23 pages
    English language
    sale 15% off
  • Draft
    23 pages
    English language
    sale 15% off
ISO
ISO 23484:2023(Main)
Determination of particle concentration by small-angle X-ray scattering (SAXS)

This document deals with the application of small-angle X-ray scattering (SAXS) for the measurement of the particle concentration in suspensions. In this document, only the concentration of sufficiently monodisperse spherical particles is treated, which means that the width of the size distribution is typically below about 50 % of the mean diameter. Here, the differential scattering cross section can be calculated based on the form factor, which depends only on the momentum transfer q and the particle radius r. Furthermore, this document is limited to dilute systems. A dilute system in the sense of SAXS means that particle interactions are absent. In case of long-range interactions (Coulomb forces between the particles), special care needs to be taken and a reduction of the concentration can be necessary.

  • Standard
    14 pages
    English language
    sale 15% off
  • Draft
    14 pages
    English language
    sale 15% off
  • Draft
    14 pages
    English language
    sale 15% off
ISO
ISO 21501-4:2018/Amd 1:2023(Amendment)
Determination of particle size distribution — Single particle light interaction methods — Part 4: Light scattering airborne particle counter for clean spaces — Amendment 1
  • Standard
    10 pages
    English language
    sale 15% off
ISO
ISO 9277:2022(Main)
Determination of the specific surface area of solids by gas adsorption — BET method

This document specifies the determination of the overall specific external and internal surface area of either disperse (e.g. nano-powders) or porous, solids by measuring the amount of physically adsorbed gas according to the method of Brunauer, Emmett and Teller method,[1] based on the 2015 International Union for Pure and Applied Chemistry (IUPAC) recommendations[3]. NOTE For solids exhibiting a chemically heterogeneous surface, for example, metal-carrying catalyst, the BET method gives the overall surface area, whereas the metallic portion of the surface area can be measured by chemisorption methods.

  • Standard
    22 pages
    English language
    sale 15% off
ISO
ISO 20998-2:2022(Main)
Measurement and characterization of particles by acoustic methods — Part 2: Linear theory

This document specifies requirements for ultrasonic attenuation spectroscopy methods for determining the size distributions of a particulate phase dispersed in a liquid at dilute concentrations, where the ultrasonic attenuation spectrum is a linear function of the particle volume fraction. In this regime particle-particle interactions are negligible. Colloids, dilute dispersions, and emulsions are within the scope of this document. The typical particle size for such analysis ranges from 10 nm to 3 mm, although particles outside this range have also been successfully measured. For solid particles in suspension, size measurements can be made at concentrations typically ranging from 0,1 % by volume up to 5 % by volume, depending on the density contrast between the solid and liquid phases, the particle size, and the frequency range[9],[10]. For emulsions, measurements can be made at much higher concentrations. These ultrasonic methods can be used to monitor dynamic changes in the size distribution.

  • Standard
    33 pages
    English language
    sale 15% off
ISO
ISO 26824:2022(Main)
Particle characterization of particulate systems — Vocabulary

This document defines terms that are relevant to the characterization of particles and particulate systems. This document includes such fields as the representation of results of particle size analysis, the descriptive and quantitative representation of particle shape and morphology, sample preparation, specific surface area and porosity characterization and such measurement methods as sedimentation, classification, acoustic methods, laser diffraction, dynamic light scattering, single particle light interaction methods, differential electrical mobility analysis, image analysis and others in a size scale from nanometre to millimetre.

  • Standard
    59 pages
    English language
    sale 15% off
ISO
ISO/TS 4807:2022(Main)
Reference materials for particle size measurement — Specification of requirements

This document is intended to support users of reference materials (RMs) for particle size analysis to identify suitable RMs (certified or not) for their needs. In line with the focus on users, questions on sample preparation that go beyond preparation of the sample as received by the user will not be covered by this document. This document describes the fundamental requirements that RMs (certified or not) for the determination of particle size shall fulfil in order to be fit for a given purpose. The document is limited to a description of the fundamental principles – the discussion whether a certain numerical value is fit for purpose is beyond the scope of this document. The scope of this document is limited to RMs (certified or not) in the form of particles. This document does not deal with any other form of RMs, like calibration grids.

  • Technical specification
    24 pages
    English language
    sale 15% off
ISO
ISO 20804:2022(Main)
Determination of the specific surface area of porous and particulate systems by small-angle X-ray scattering (SAXS)

This document specifies the application of small-angle X-ray scattering (SAXS) for the determination of specific surface area. Both the mass specific surface area in the order of 1 m2g-1 to 2 000 m2g-1 and the volume specific surface areas in the range from 0,01 m2cm-3 to 1 000 m2cm-3 can be obtained. The method described is applicable to dilute and concentrated systems. NOTE: In ISO 17867:2020, the determination of the particle size by SAXS is limited to dilute systems. The determination of surfaces with SAXS is straightforward for two-phase systems only. Surface determination in systems with more than two phases is beyond the scope of this document. The term ‘surface’ refers to any interface between domains of different density (more precisely: electron density) and is not restricted to the external surface of particles. As any interfaces between areas with different electron density, not only to air or vacuum, can be probed, the method can be applied to any heterogeneous system. SAXS measures not only the specific surface area of open pores but also of inaccessible, closed pores or inclusions. NOTE: This is in contrast to gas sorption methods which are described in ISO 9277:2010. In addition to porous systems, there can be contributions of internal interfaces to the measured specific surface area of any heterogeneous compact solid system, such as between crystalline and amorphous phases, provided there is an electron density contrast. Although materials comprising micropores (pore width

  • Standard
    22 pages
    English language
    sale 15% off
  • Draft
    22 pages
    English language
    sale 15% off
ISO
ISO 15901-2:2022(Main)
Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption — Part 2: Analysis of nanopores by gas adsorption

This document describes a method for the evaluation of porosity and pore size distribution by physical adsorption (or physisorption). The method is limited to the determination of the quantity of a gas adsorbed per unit mass of sample as a function of pressure at a controlled, constant temperature[1]-[9]. Commonly used adsorptive gases for physical adsorption characterization include nitrogen, argon, krypton at the temperatures of liquid nitrogen and argon (77 K and 87 K respectively) as well as CO2 (at 273 K). Traditionally, nitrogen and argon adsorption at 77 K and 87 K, respectively, allows one to assess pores in the approximate range of widths 0,45 nm to 50 nm, although improvements in temperature control and pressure measurement allow larger pore widths to be evaluated. CO2 adsorption at 273 K – 293 K can be applied for the microporous carbon materials exhibiting ultramicropores. Krypton adsorption at 77 K and 87 K is used to determine the surface area or porosity of materials with small surface area or for the analysis of thin porous films. The method described is suitable for a wide range of porous materials. This document focuses on the determination of pore size distribution from as low as 0,4 nm up to approximately 100 nm. The determination of surface area is described in ISO 9277. The procedures which have been devised for the determination of the amount of gas adsorbed may be divided into two groups: — those which depend on the measurement of the amount of gas removed from the gas phase, i.e. manometric (volumetric) methods; — those which involve the measurement of the uptake of the gas by the adsorbent (i.e. direct determination of increase in mass by gravimetric methods). In practice, static or dynamic techniques can be used to determine the amount of gas adsorbed. However, the static manometric method is generally considered the most suitable technique for undertaking physisorption measurements with nitrogen, argon and krypton at cryogenic temperatures (i.e. 77 K and 87 K, the boiling temperature of nitrogen and argon, respectively) with the goal of obtaining pore volume and pore size information. This document focuses only on the application of the manometric method.

  • Standard
    29 pages
    English language
    sale 15% off
  • Draft
    29 pages
    English language
    sale 15% off
ISO
ISO 13322-2:2021(Main)
Particle size analysis — Image analysis methods — Part 2: Dynamic image analysis methods

This document describes a method to transfer the images from particles having relative motion to binary images within practical systems, in which the particles in the images are individually separated. Images of moving particles are created by an optical image capture device. Effects of particle movement on the images are either minimized by the instrumentation or corrected by software procedures. This method is applicable to the particle images that are clearly distinguishable from static background. Further processing of the binary image, which is then considered as static, is described in ISO 13322-1. A dynamic image analysis system is capable of measuring a higher number of particles compared to static image analysis systems. This document provides guidance on instrument qualification for particle size distribution measurements by using particulate reference materials. This document addresses the relative movement of the particles with respect to each other, the effect of particle movement on the image (motion blur), the movement and position along the optical axis (depth of field), and the orientation of the particles with respect to the camera.

  • Standard
    53 pages
    English language
    sale 15% off
  • Draft
    54 pages
    English language
    sale 15% off