ISO 2966:1982

Cinematography — 16 mm motion-picture film perforated 8 mm Type S (1-3) and (1-4) — Cutting and perforating dimensions

Cinématographie — Film cinématographique 16 mm perforé 8 mm type S (1-3) et (1-4) — Dimensions de coupe et de perforation

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-1982
• Withdrawal Date: 30-Nov-1982
• ICS: 37.060.20 - Motion picture films. Cartridges
• Technical Committee: ISO/TC 36 - Cinematography
• Drafting Committee: ISO/TC 36 - Cinematography
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 01-Nov-1988

Relations

• Revised: ISO 2966:1988 - Cinematography — 16 mm motion-picture film perforated 8 mm Type S (1-3) and (1-4) — Cutting and perforating dimensions
• Effective Date: 15-Apr-2008

Standards Content (Sample)

International Standard 2966
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION*MEXAYHAPO~HAR OPïAHH3AUHR Il0 CTAH&WTH3AUHHWRGANlSATION INTERNATIONALE DE NORMALISATION
Cinematography - 16 mm motion-picture film perforated
e
8 mm Type S (1-3) and (1-4) - Cutting and perforating
dimensions
Cinématographie - Film cinématographique 16 mm perforé 8 mm type S (1-3) et (1-4) - Dimensions de coupe et de perforation
Second edition - 1982-12-15
UDC 778.5 : 771.531.352 : 77.021.17 Ref. No. IS0 2966-1982 (E)
:-
IN
Descriptors : cinematography, motion picture film 16 mm, motion picture film 8 mm, perforating, cutting, dimensions.
rw
8 Price based on 3 pages

---------------------- Page: 1 ----------------------
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards institutes (IS0 member bodies). The work of developing Inter-
national Standards is carried out through IS0 technical committees. Every member
body interested in a subject for which a technical committee has been set up has the
right to be represented on that committee. International organizations, governmental
e
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council.
International Standard IS0 2966 was developed by Technical Committee ISO/TC 36,
Cinematography.
This second edition was submitted directly to the IS0 Council, in accordance with
clause 6.11.2 of part 1 of the Directives for the technical work of ISO. It cancels and
replaces the first edition (i.e. IS0 2966-19761, which had been approved by the
member bodies of the following countries :
Belgium Italy Switzerland
Canada Japan Turkey
Czechoslovakia Mexico United Kingdom
Denmark Netherlands USA
France South Africa, Rep. of USSR
Germany, F. R. Spain
e
India Sweden
No member body had expressed disapproval of the document.
0 International Organization for Standardization, 1982 O
Printed in Switzerland

---------------------- Page: 2 ----------------------
INTERNATIONAL STANDARD IS0 2966-1982 (E)
Cinematography - 16 mm motion-picture film perforated
8 mm Type S (1-3) and (1-4) - Cutting and perforating
dimensions
0
1 Scope and field of application
This International Standard specifies the cutting and perforating dimensions for 16 mm motion-picture raw stock perforated 8 mm
Type S in positions 1-3 and 1-4, as well as the width of motion-picture film after processing and slitting.
2 References
IS0 543, Cinematography - Motion-picture safety film - Definition, testing and marking.
IS0 1700, Cinematography - 8 mm Type S motion-picture raw stock film - Cutting and perforating dimensions.
NOTE - IS0 1700 is included as a reference guide as 8 mm Type S film is more commonly encountered in that format.
3 Dimensions
The dimensions and tolerances shall be as shown in the figures and given in the table; they apply to safety raw stock film as described
in IS0 543, immediately after cutting and perforating.
The dimensions apply at the time of cutting and perforating for film adjusted to a temperature of 23 f 1 OC, and a relative humidity of
50 f 2 %. The manufacturer may indicate other nominal temperature and humidity conditions under which the dimensions apply.
1

---------------------- Page: 3 ----------------------
IS0 2966-1982 (E)
A
A L
#
r
O
O
Refe
...

Norme internationale @ 2966
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION*ME~YHAPO~HAR OPrAHH3AUMR Il0 CTAHAAPTH3AUHH.ORGANlSATlON INTERNATIONALE DE NORMALISATION
!
r
Cinématographie - Film cinématographique 16 mm
i*
E
perforé 8 mm type S (1-3) et (1-4) - Dimensions de coupe
F
et de perforation
Cinematography - 76 mm motion-picture film perforated 8 rnm Type S (7-3) and 17-41 - Cutting and perforating dimensions
Deuxième édition - 1982-12-15
I CDU 778.5 : 771 531 352 : 77.021 .I7 Réf. no : IS0 2966-1982 (FI
5
Descripteurs : cinématographie, film cinématographique 16 mm, film cinématographique 8 mm, perforation, coupage, dimension.
E
O
Prix basé sur 3 pages
E

---------------------- Page: 1 ----------------------
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale
d'organismes nationaux de normalisation (comités membres de I'ISO). L'élaboration
des Normes internationales est confiée aux comités techniques de I'ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I'ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I'ISO.
La Norme internationale IS0 2966 a été élaborée par le comité technique ISO/TC 36,
Cinématographie.
Cette deuxième édition fut soumise directement au Conseil de I'ISO, conformément au
paragraphe 6.11.2 de la partie 1 des Directives pour les travaux techniques de I'ISO.
Elle annule et remplace la première édition (IS0 2966-1976), qui avait été approuvée par
les comités membres des pays suivants :
Afrique du Sud, Rép. d' Inde Suisse
R. F. Italie Tchécoslovaquie
Allemagne,
Belgique
Japon Turquie
Canada
Mexique URSS
Danemark Pays-Bas USA
Espagne Royaume-Uni
France Suède
Aucun comité membre ne l'avait désapprouvée.
@ Organisation internationale de normalisation, 1982 O
Imprimé en Suisse

---------------------- Page: 2 ----------------------
IS0 2966-1982 (FI
A
1
I
O U
7-
O O i
O O
F
d d
E
-
-4
Bord de
Bord de référence
référence
t
I
3
Figure 1 - Film perforé 1-4
Figure 2 - Film perforé 1-3
Ta bleau
*- A' -
Dimension mm in
* c
A 15,95 I 0,03 0,628 f 0.001 0
A' 7,975 f 0.050 0,3140 f 0.0020
O
B 4,234 f 0.010 0,166 7 I 0,oOo 4
B' *) 4,227 f 0,010 0,1664 I0.0004
C 0,914 f 0,010 0,0360 I 0,0004
D 1,143 f 0,010 0,045 O I 0,oOO 4
R 0,13 f 0.03 0,005 I 0,001
E 0,51 f 0,m 0,020 I 0,002
F 14.02 f 0.03 0,552 I 0,001
G 0,025 max. 0,001 O max.
Perforation Film traité et recoupé
7,975 f 0,025
0,314 O f 0.001 0
;*4 423,4 f 0.4 16,670 f 0,017
Figure 3 - Détail de la perforation et
L' *) **) 422,7 f 0.4 16,640 f: 0,017
largeur du film traité et recoupé
Les dimensions B' et L' (pas de perforation court) sont prévues
pour satisfaire aux exigences du tirage continu sur
...