ISO 71:2014

Cinematography — 16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film — Positions and dimensions

ISO 71:2014 specifies the positions and width dimensions of 16 mm negative monophonic photographic sound record on 16 mm, 35/16 mm, and 35/32 mm motion picture film intended for printing of 16 mm release prints.

Cinématographie — Enregistrement sonore photographique négatif 16 mm sur film cinématographique de 16 mm, 35/16 mm et 35/32 mm — Emplacement et dimensions

General Information

• Status: Published
• Publication Date: 30-Sep-2014
• ICS: 37.060.20 - Motion picture films. Cartridges
• Technical Committee: ISO/TC 36 - Cinematography
• Drafting Committee: ISO/TC 36/WG 3 - Audio technology
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 04-Mar-2020

Relations

• Revises: ISO 71:1977 - Cinematography — 16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film — Positions and dimensions
• Effective Date: 18-May-2013

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 71
Second edition
2014-10-01
Cinematography — 16 mm negative
photographic sound record on 16
mm, 35/16 mm and 35/32 mm
motion-picture film — Positions and
dimensions
Cinématographie — Enregistrement sonore photographique négatif
16 mm sur film cinématographique de 16 mm, 35/16 mm et 35/32
mm — Emplacement et dimensions
Reference number
ISO 71:2014(E)
©
ISO 2014

---------------------- Page: 1 ----------------------
ISO 71:2014(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 71:2014(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Dimensions . 1
3 Location for emulsion . 1
Bibliography . 4
© ISO 2014 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 71:2014(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for id
...