Plain bearings — Hydrodynamic plain thrust pad bearings under steady-state conditions — Part 3: Guide values for the calculation of thrust pad bearings

This part of ISO 12131 specifies guide values for avoiding damage to thrust-pad bearings in service. The explanation of the symbols as well as examples for calculation are given in ISO 12131-1.

Paliers lisses — Butées hydrodynamiques à patins géométrie fixe fonctionnant en régime stationnaire — Partie 3: Paramètres opérationnels admissibles pour le calcul des butées à segments

La présente partie de l'ISO 12131 spécifie les paramètres opérationnels admissibles pour le calcul des butées à segments. L'explication des symboles ainsi que des exemples de calcul sont donnés dans l'ISO 12131-1.

Drsni ležaji - Aksialni hidrodinamični drsni ležaji z nepomičnimi blazinicami - 3. del: Priporočene vrednosti za izračun blazinic

General Information

Status
Withdrawn
Publication Date
18-Apr-2001
Withdrawal Date
18-Apr-2001
Current Stage
9599 - Withdrawal of International Standard
Completion Date
08-Jul-2020

Relations

Buy Standard

Standard
ISO 12131-3:2002
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 12131-3:2001 - Plain bearings -- Hydrodynamic plain thrust pad bearings under steady-state conditions
English language
5 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 12131-3:2001 - Paliers lisses -- Butées hydrodynamiques a patins géométrie fixe fonctionnant en régime stationnaire
French language
5 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ISO 12131-3:2002
01-marec-2002
'UVQLOHåDML$NVLDOQLKLGURGLQDPLþQLGUVQLOHåDML]QHSRPLþQLPLEOD]LQLFDPL
GHO3ULSRURþHQHYUHGQRVWL]DL]UDþXQEOD]LQLF
Plain bearings -- Hydrodynamic plain thrust pad bearings under steady-state conditions -
- Part 3: Guide values for the calculation of thrust pad bearings
Paliers lisses -- Butées hydrodynamiques à patins géométrie fixe fonctionnant en régime
stationnaire -- Partie 3: Paramètres opérationnels admissibles pour le calcul des butées
à segments
Ta slovenski standard je istoveten z: ISO 12131-3:2001
ICS:
21.100.10 Drsni ležaji Plain bearings
SIST ISO 12131-3:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 12131-3:2002

---------------------- Page: 2 ----------------------

SIST ISO 12131-3:2002
INTERNATIONAL ISO
STANDARD 12131-3
First edition
2001-04-15
Plain bearings — Hydrodynamic plain
thrust pad bearings under steady-state
conditions
Part 3:
Guide values for the calculation of thrust
pad bearings
Paliers lisses — Butées hydrodynamiques à patins géométrie fixe
fonctionnant en régime stationnaire
Partie 3: Paramètres opérationnels admissibles pour le calcul des butées
àsegments
Reference number
ISO 12131-3:2001(E)
©
ISO 2001

---------------------- Page: 3 ----------------------

SIST ISO 12131-3:2002
ISO 12131-3:2001(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2001
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 2001 – All rights reserved

---------------------- Page: 4 ----------------------

SIST ISO 12131-3:2002
ISO 12131-3:2001(E)
Contents Page
Foreword.iv
Introduction.v
1 Scope .1
2 Normative references .1
3 Guide values for avoiding damage caused by wear .1
4 Guide values to avoid mechanical overloading .2
5 Guide values to avoid thermal overloading .4
Bibliography.5
© ISO 2001 – All rights reserved iii

---------------------- Page: 5 ----------------------

SIST ISO 12131-3:2002
ISO 12131-3:2001(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 12131 may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 12131-3 was prepared by Technical Committee ISO/TC 123, Plain bearings,
Subcommittee SC 4, Methods of calculation of plain bearings.
ISO 12131 consists of the following parts, under the general title Plain bearings — Hydrodynamic plain thrust pad
bearings under steady-state conditions:
� Part 1: Calculation of thrust pad bearings
� Part 2: Functions for the calculation of thrust pad bearings
� Part 3: Guide values for the calculation of thrust pad bearings
iv © ISO 2001 – All rights reserved

---------------------- Page: 6 ----------------------

SIST ISO 12131-3:2002
ISO 12131-3:2001(E)
Introduction
In order to achieve that pad thrust bearings calculated in accordance with ISO 12131-1 are sufficiently reliable in
operation, it is necessary that the calculated operational parameters h , T or T and p do not fall below or
min B 2
exceed the guide values h , T and p .
lim lim lim
For limiting cases at high specific loads and/or high rotational frequencies, more accurate calculations are
necessary taking into consideration thermal, elastic, hydrodynamic and/or turbulence effects.
The guide values represent limiting values in the tribological system plain bearing unit which are dependent on
geometry and technology. These are empirical values which still give sufficient reliability in operation even when
subjected to slight disturbing influences (see clause 4 of ISO 12131-1:2001).
The empirical values given can be modified for specific fields of application.
© ISO 2001 – All rights reserved v

---------------------- Page: 7 ----------------------

SIST ISO 12131-3:2002

---------------------- Page: 8 ----------------------

SIST ISO 12131-3:2002
INTERNATIONAL STANDARD ISO 12131-3:2001(E)
Plain bearings — Hydrodynamic plain thrust pad bearings under
steady-state conditions
Part 3:
Guide values for the calculation of thrust pad bearings
1 Scope
This part of ISO 12131 specifies guide values for avoiding damage to thrust-pad bearings in service.
The explanation of the symbols as well as examples for calculation are given in ISO 12131-1.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of
this part of ISO 12131. For dated references, subsequent amendments to, or revisions of, any of these publications
do not apply. However, parties to agreements based on this part
...

INTERNATIONAL ISO
STANDARD 12131-3
First edition
2001-04-15
Plain bearings — Hydrodynamic plain
thrust pad bearings under steady-state
conditions
Part 3:
Guide values for the calculation of thrust
pad bearings
Paliers lisses — Butées hydrodynamiques à patins géométrie fixe
fonctionnant en régime stationnaire
Partie 3: Paramètres opérationnels admissibles pour le calcul des butées
àsegments
Reference number
ISO 12131-3:2001(E)
©
ISO 2001

---------------------- Page: 1 ----------------------
ISO 12131-3:2001(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2001
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 2001 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 12131-3:2001(E)
Contents Page
Foreword.iv
Introduction.v
1 Scope .1
2 Normative references .1
3 Guide values for avoiding damage caused by wear .1
4 Guide values to avoid mechanical overloading .2
5 Guide values to avoid thermal overloading .4
Bibliography.5
© ISO 2001 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 12131-3:2001(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 12131 may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 12131-3 was prepared by Technical Committee ISO/TC 123, Plain bearings,
Subcommittee SC 4, Methods of calculation of plain bearings.
ISO 12131 consists of the following parts, under the general title Plain bearings — Hydrodynamic plain thrust pad
bearings under steady-state conditions:
� Part 1: Calculation of thrust pad bearings
� Part 2: Functions for the calculation of thrust pad bearings
� Part 3: Guide values for the calculation of thrust pad bearings
iv © ISO 2001 – All rights reserved

---------------------- Page: 4 ----------------------
ISO 12131-3:2001(E)
Introduction
In order to achieve that pad thrust bearings calculated in accordance with ISO 12131-1 are sufficiently reliable in
operation, it is necessary that the calculated operational parameters h , T or T and p do not fall below or
min B 2
exceed the guide values h , T and p .
lim lim lim
For limiting cases at high specific loads and/or high rotational frequencies, more accurate calculations are
necessary taking into consideration thermal, elastic, hydrodynamic and/or turbulence effects.
The guide values represent limiting values in the tribological system plain bearing unit which are dependent on
geometry and technology. These are empirical values which still give sufficient reliability in operation even when
subjected to slight disturbing influences (see clause 4 of ISO 12131-1:2001).
The empirical values given can be modified for specific fields of application.
© ISO 2001 – All rights reserved v

---------------------- Page: 5 ----------------------
INTERNATIONAL STANDARD ISO 12131-3:2001(E)
Plain bearings — Hydrodynamic plain thrust pad bearings under
steady-state conditions
Part 3:
Guide values for the calculation of thrust pad bearings
1 Scope
This part of ISO 12131 specifies guide values for avoiding damage to thrust-pad bearings in service.
The explanation of the symbols as well as examples for calculation are given in ISO 12131-1.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of
this part of ISO 12131. For dated references, subsequent amendments to, or revisions of, any of these publications
do not apply. However, parties to agreements based on this part of ISO 12131 are encouraged to investigate the
possibility of applying the most recent editions of the normative documents indicated below. For undated
references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain
registers of currently valid International Standards.
ISO 4381, Plain bearings — Lead and tin casting alloys for multilayer plain bearings.
ISO 4382-1, Plain bearings — Copper alloys — Part 1: Cast copper alloys for solid and multilayer thick-walled plain
bearings.
ISO 4382-2, Plain bearings — Copper alloys — Part 2: Wrought
...

NORME ISO
INTERNATIONALE 12131-3
Première édition
2001-04-15
Paliers lisses — Butées hydrodynamiques
à patins géométrie fixe fonctionnant en
régime stationnaire
Partie 3:
Paramètres opérationnels admissibles pour
le calcul des butées à segments
Plain bearings — Hydrodynamic plain thrust pad bearings under steady-
state conditions
Part 3: Guide values for the calculation of thrust pad bearings
Numéro de référence
ISO 12131-3:2001(F)
©
ISO 2001

---------------------- Page: 1 ----------------------
ISO 12131-3:2001(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier peut
être imprimé ou visualisé, mais ne doit pas être modifiéà moins que l'ordinateur employéà cet effet ne bénéficie d'une licence autorisant
l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées acceptent de fait la
responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute responsabilité en la
matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la créationduprésent fichier PDF sont disponibles dans la rubrique General Info du
fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir l'exploitation de
ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation, veuillez en informer le
Secrétariat central à l'adresse donnée ci-dessous.
© ISO 2001
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque
forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l’ISO à
l’adresse ci-aprèsouducomité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Imprimé en Suisse
ii © ISO 2001 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 12131-3:2001(F)
Sommaire Page
Avant-propos.iv
Introduction.v
1 Domaine d'application.1
2Références normatives .1
3 Valeurs indicatives permettant d'éviter les dommages dus à l'usure .1
4 Valeurs indicatives permettant d'éviter toute surcharge mécanique .2
5 Valeurs indicatives permettant d'éviter une surcharge thermique .4
Bibliographie .5
© ISO 2001 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 12131-3:2001(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiéeaux
comités techniques de l'ISO. Chaque comité membre intéressé par une étude aledroit de fairepartie ducomité
technique créé à cet effet. Les organisations internationales, gouvernementales et non gouvernementales, en
liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec la Commission
électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI, Partie 3.
Les projets de Normes internationales adoptés par les comités techniques sont soumis aux comités membres pour
vote. Leur publication comme Normes internationales requiert l'approbation de 75 % au moins des comités
membres votants.
L’attention est appelée sur le fait que certains des éléments delaprésente partie de l’ISO 12131 peuvent faire
l’objet de droits de propriété intellectuelle ou de droits analogues. L’ISO ne saurait être tenue pour responsable de
ne pas avoir identifié de tels droits de propriété et averti de leur existence.
La Norme internationale ISO 12131-3 a étéélaborée par le comité technique ISO/TC 123, Paliers lisses, sous-
comité SC 4, Méthodes de calcul des paliers lisses.
L'ISO 12131 comprend les parties suivantes, présentées sous le titre général Paliers lisses — Butées
hydrodynamiques à patins géométrie fixe fonctionnant en régime stationnaire:
� Partie 1: Calcul des butées à segments
� Partie 2: Fonctions pour le calcul des butées à segments
� Partie 3: Paramètres opérationnels admissibles pour le calcul des butées à segments
iv © ISO 2001 – Tous droits réservés

---------------------- Page: 4 ----------------------
ISO 12131-3:2001(F)
Introduction
Afin de déterminer que les paliers de butée à patins calculés conformément à l'ISO 12131-1 sont suffisamment
fiables en fonctionnement, il est nécessaire que les paramètres de fonctionnement calculés h , T ou T et p ne
min B 2
soient pas inférieurs ounedépassent pas les valeurs indicatives h , T et p .
lim lim
lim
Pour limiter les cas de grandes charges spécifiques et/ou de hautes fréquences de rotation, des calculs plus précis
sont nécessaires prenant en considération les effets thermiques, élastiques, hydrodynamiques et/ou les
turbulences.
Les valeurs indicatives représentent les valeurs limites de l'ensemble de paliers lisses à système tribologique qui
dépendent de la géométrie et de la technologie. Ces valeurs sont des valeurs empiriques qui garantissent une
fiabilité suffisante en fonctionnement même lorsque les paliers sont soumis à de faibles influences perturbatrices
(voir l'article 5 de l'ISO 12131-1:2001).
Les valeurs empiriques données peuvent être modifiées pour des domaines d'application spécifiques.
© ISO 2001 – Tous droits réservés v

---------------------- Page: 5 ----------------------
NORME INTERNATIONALE ISO 12131-3:2001(F)
Paliers lisses — Butées hydrodynamiques à patins géométrie fixe
fonctionnant en régime stationnaire
Partie 3:
Paramètres opérationnels admissibles pour le calcul des butées
à segments
1 Domaine d'application
La présente partie de l’ISO 12131 spécifie les paramètres opérationnels admissibles pour le calcul des butées à
segments.
L'explication des symboles ainsi que des exemples de calcul sont donnés dans l'ISO 12131-1.
2Références normatives
Les documents normatifs suivants contiennent des dispositions qui, par suite de la référence qui y est faite,
constituent des dispositions valables pour la présente partie de l'ISO 12131. Pour les références datées, les
amendements ultérieurs ou les révisions de ces publications ne s’appliquent pas. Toutefois, les parties prenantes
aux accords fondés sur la présente partie de l'ISO 12131 sont invitées à rechercher la possibilité d'appliquer les
éditions les plus récentes des documents normatifs indiqués ci-après. Pour les références non datées, la dernière
édition du document normatif en référence s’applique. Les membres de l'ISO et de la CEI possèdent le registre des
Normes internationales en vigueur.
ISO 3448:1992, Lubrifiants liquides industriels — Classification ISO selon la viscosité.
ISO 4382-1, Paliers lisses — Alliages de cuivre — Partie 1: Alliages de cuivre moulés pour paliers lisses à paroi
épaisse, massifs et multicouches.
ISO 4382-2, Paliers lisses — Alliages de cuivre — Partie 2: Alliage de cuivre corroyés pour paliers lisses massifs.
ISO 4383, Paliers lisses — Matériaux multicouches pour
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.