ISO/IEC 18052:2012

Information technology — Telecommunications and information exchange between systems — ASN.1 for Computer Supported Telecommunications Applications (CSTA) Phase III

ISO/IEC 18052:2012 specifies application protocol data units (APDUs) for the services described in ISO/IEC 18051.

Technologies de l'information — Téléinformatique — ASN.1 pour applications en télécommunications supportées par ordinateur (CSTA) en phase III

General Information

• Status: Published
• Publication Date: 03-Sep-2012
• ICS: 35.100.30 - Network layer
• Technical Committee: ISO/IEC JTC 1/SC 6 - Telecommunications and information exchange between systems
• Drafting Committee: ISO/IEC JTC 1/SC 6 - Telecommunications and information exchange between systems
• Current Stage: 9060 - Close of review
• Start Date: 03-Jun-2028

Relations

• Revises: ISO/IEC 18052:2011 - Information technology — Telecommunications and information exchange between systems — Protocol for Computer Supported Telecommunications Applications (CSTA) Phase III
• Effective Date: 24-Dec-2011

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 18052
Third edition
2012-09-01

Information technology —
Telecommunications and information
exchange between systems — ASN.1 for
Computer Supported
Telecommunications Applications (CSTA)
Phase III
Technologies de l'information — Téléinformatique — ASN.1 pour
applications en télécommunications supportées par ordinateur (CSTA)
en phase III



Reference number
ISO/IEC 18052:2012(E)
©
ISO/IEC 2012

---------------------- Page: 1 ----------------------
ISO/IEC 18052:2012(E)


This CD-ROM contains the publication ISO/IEC 18052:2012 in portable document format (PDF), which can be
viewed using Adobe® Acrobat® Reader.
Adobe and Acrobat are trademarks of Adobe Systems Incorporated.

This third edition cancels and replaces the second edition (ISO/IEC 18052:2011), which has been technically
revised.
COPYRIGHT PROTECTED DOCUMENT


©  ISO/IEC 2012
All rights reserved. Unless required for installation or otherwise specified, no part of this CD-ROM may be reproduced, stored in a retrieval
system or transmitted in any form or by any means without prior permission from ISO. Requests for permission to reproduce this product
should be addressed to
ISO copyright office  Case postale 56  CH-1211 Geneva 20  Switzerland
Internet [e-mail]
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
Published in Switzerland

ii © ISO/IEC 2012 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 18052:2012(E)
Installation
...

INTERNATIONAL ISO/IEC
STANDARD 18052
Third edition
2012-09-01


Information technology —
Telecommunications and information
exchange between systems — ASN.1 for
Computer Supported
Telecommunications Applications (CSTA)
Phase III
Technologies de l'information — Téléinformatique — ASN.1 pour
applications en télécommunications supportées par ordinateur (CSTA)
en phase III




Reference number
ISO/IEC 18052:2012(E)
©
ISO/IEC 2012

---------------------- Page: 1 ----------------------
ISO/IEC 18052:2012(E)

COPYRIGHT PROTECTED DOCUMENT


©  ISO/IEC 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO/IEC 2012 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 18052:2012(E)
Contents Page
Foreword . x
Introduction . xi
1  Scope . 1
2  Conformance . 1
2.1  Static Requirements . 1
2.2  Dynamic Requirements . 1
2.3  PICS Requirement . 1
3  Normative References . 2
4  Terms and definitions . 2
5  CSTA Service Definition Model . 2
5.1  CSTA Application Layer Structure . 2
5.2  Remote Operations . 3
5.3  The CSTA Service Response . 3
5.4  Cross Referencing of Event Reports . 3
5.5  Handling of Private Data . 4
6  Interconnection service boundary . 4
7  Security . 4
8  Association Management . 4
8.1  Implicit association . 4
8.2  Dynamic association management using ACSE . 4
8.2.1  Encoding of application context name . 5
8.2.2  Encoding of application context information . 5
9  CSTA parameter types . 10
9.1  Switching function objects . 10
9.2  Device Identifiers . 11
9.3  Call and connection identifiers . 13
9.4  Connection states . 14
9.5  Status reporting . 15
9.6  Device and feature types and other parameters . 18
9.7  Security . 24
9.8  Common extensions . 25
9.9  Call control . 26
9.10  Capability Exchange . 30
9.11  Call Detail Record . 95
9.12  Charge information . 98
9.13  Data call types . 99
9.14  Escape types . 100
9.15  Media services . 101
9.16  Physical device features . 104
9.17  Data Collection . 106
9.18  Event Cause . 107
9.19  Error Value . 110
10  Event Report Service . 116
11  Capability exchange services . 122
11.1  Services . 122
11.1.1  Get CSTA-Features . 122
© ISO/IEC 2012 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/IEC 18052:2012(E)
11.1.2  Get logical device information . 124
11.1.3  Get physical device information . 126
11.1.4  Get switching function capabilities . 127
11.1.5  Get switching function devices . 131
11.1.6  Switching function devices . 133
12  System services . 134
12.1  Registration services . 134
12.1.1  Change system status filter . 134
12.1.2  System register . 135
12.1.3  System register abort . 136
12.1.4  System register cancel . 137
12.2  Services . 138
12.2.1  Request system status . 138
12.2.2  System status . 139
12.2.3  Switching function capabilities changed . 140
12.2.4  Switching function devices changed. 141
12.2.5  Get Registrations . 142
12.2.6  Registration Info . 143
13  Monitoring services . 144
13.1  Services . 144
13.1.1  Change monitor filter . 144
13.1.2  Monitor start . 145
13.1.3  Monitor stop . 146
13.1.4  Get Monitor . 147
13.1.5  Monitor Info . 148
14  Snapshot services . 149
14.1  Services . 149
14.1.1  Snapshot call . 149
14.1.2  Snapshot device . 151
14.1.3  Snapshot calldata . 152
14.1.4  Snapshot devicedata . 153
15  Call control services and events . 154
15.1  Services . 154
15.1.1  Accept call . 154
15.1.2  Alternate call . 155
15.1.3  Answer call . 156
15.1.4  Call back call-related . 157
15.1.5  Call back message call-related . 158
15.1.6  Camp on call . 159
15.1.7  Clear call . 160
15.1.8  Clear Connection . 161
15.1.9  Conference call . 162
15.1.10 Consultation call . 163
15.1.11 Deflect call . 165
15.1.12 Dial digits . 167
15.1.13 Directed pickup call . 168
15.1.14 Group pickup call. 169
15.1.15 Hold call . 170
15.1.16 Intrude call . 171
15.1.17 Join call . 172
15.1.18 Make call . 173
15.1.19 Make connection . 175
15.1.20 Make predictive call . 177
15.1.21 Park call . 179
15.1.22 Reconnect call . 180
15.1.23 Retrieve call . 181
15.1.24 Single step conference call . 182
15.1.25 Send Message . 184
iv © ISO/IEC 2012 – All rights reserved

---------------------- Page: 4 ----------------------
ISO/IEC 18052:2012(E)
15.1.26 Single step transfer call . 186
15.1.27 Transfer call . 188
15.2  Events . 189
15.2.1  Bridged . 189
15.2.2  Call cleared . 191
15.2.3  Conferenced . 192
15.2.4  Connection cleared . 194
15.2.5  Delivered . 196
15.2.6  Digits dialed . 198
15.2.7  Diverted . 200
15.2.8  Established . 202
15.2.9  Failed . 204
15.2.10 Held . 206
15.2.11 Network capabilities changed . 207
15.2.12 Network reached . 209
15.2.13 Offered . 211
15.2.14 Originated . 213
15.2.15 Queued . 215
15.2.16 Retrieved . 217
15.2.17 Service initiated . 218
15.2.18 Transferred . 220
16  Call associated features . 222
16.1  Services . 222
16.1.1  Associate data . 222
16.1.2  Cancel telephony tones . 224
16.1.3  Change Connection Information . 225
16.1.4  Generate digits . 226
16.1.5  Generate telephony tones . 227
16.1.6  Send user information . 228
16.2  Events . 229
16.2.1  Call information . 229
16.2.2  Charging . 230
16.2.3  Digits generated . 231
16.2.4  Telephony tones generated . 232
16.2.5  Service completion failure . 233
17  Media attachment services and events . 234
17.1  Services . 234
17.1.1  Attach media service . 234
17.1.2  Detach media service . 236
17.2  Events . 237
17.2.1  Media attached . 237
17.2.2  Media detached . 238
18  Routeing services . 239
18.1  Registration services . 239
18.1.1  Route register . 239
18.1.2  Route register abort . 240
18.1.3  Route register cancel . 241
18.2  Services . 242
18.2.1  Re-Route . 242
18.2.2  Route end . 243
18.2.3  Route reject . 244
18.2.4  Route request . 245
18.2.5  Route select . 247
18.2.6  Route used . 248
19  Physical device features . 249
19.1  Services . 249
19.1.1  Button press . 249
19.1.2  Get auditory apparatus information . 250
© ISO/IEC 2012 – All rights reserved v

---------------------- Page: 5 ----------------------
ISO/IEC 18052:2012(E)
19.1.3  Get button information . 251
19.1.4  Get display . 252
19.1.5  Get hookswitch status . 253
19.1.6  Get lamp information . 254
19.1.7  Get lamp mode . 255
19.1.8  Get message waiting indicator . 256
19.1.9  Get microphone gain . 257
19.1.10 Get microphone mute . 258
19.1.11 Get ringer status . 259
19.1.12 Get speaker mute . 260
19.1.13 Get speaker volume . 261
19.1.14 Set button information . 262
19.1.15 Set display . 263
19.1.16 Set hookswitch status . 264
19.1.17 Set lamp mode . 265
19.1.18 Set message waiting indicator . 266
19.1.19 Set microphone gain . 267
19.1.20 Set microphone mute . 268
19.1.21 Set ringer status . 269
19.1.22 Set speaker mute .
...