ISO 14133-2:2006

Optics and optical instruments — Specifications for binoculars, monoculars and spotting scopes — Part 2: High performance instruments

ISO 14133-2:2006 is applicable to high performance binoculars, monoculars and spotting scopes. It is not applicable to general purpose binoculars, monoculars and spotting scopes which are specified in ISO 14133-1.

Optique et instruments d'optique — Spécifications pour jumelles, monoculaires et lunettes — Partie 2: Instruments haute performance

General Information

• Status: Withdrawn
• Publication Date: 14-Mar-2006
• Withdrawal Date: 14-Mar-2006
• ICS: 37.020 - Optical equipment
• Technical Committee: ISO/TC 172/SC 4 - Telescopic systems
• Drafting Committee: ISO/TC 172/SC 4 - Telescopic systems
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 02-May-2016

Relations

• Revised: ISO 14133-2:2016 - Optics and photonics — Specifications for binoculars, monoculars and spotting scopes — Part 2: High performance instruments
• Effective Date: 05-Nov-2015

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 14133-2
First edition
2006-03-15

Optics and optical instruments —
Specifications for binoculars, monoculars
and spotting scopes —
Part 2:
High performance instruments
Optique et instruments d'optique — Spécifications pour jumelles,
monoculaires et lunettes —
Partie 2: Instruments haute performance




Reference number
ISO 14133-2:2006(E)
©
ISO 2006

---------------------- Page: 1 ----------------------
ISO 14133-2:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO 2006 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 14133-2:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 14133-2 was prepared by Technical Committee ISO/TC 172, Optics and photonics, Subcommittee SC 4,
Telescopic systems.
ISO 14133 consists of the following parts, under the general title Optics and optical instruments —
Specifications for binoculars, monoculars and spotting scopes:
⎯ Part 1: General purpose instruments
⎯ Part 2: High performance instruments

© ISO 2006 – All rights reserved iii

---------------------- Page: 3 ----------------------
INTERNATIONAL STANDARD ISO 14133-2:2006(E)

Optics and optical instruments — Specifications for binoculars,
monoculars and spotting scopes —
Part 2:
High performance instruments
1 Scope
This part of ISO 14133 is applicable to high performance binoculars, monoculars and spotting scopes. It is not
applicable to general purpose binoculars, monoculars and spotting scopes which are specified in ISO 14133-1.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 10109-4, Optics and optical instruments — Environmental requirements — Part 4: Test requirements for
telescopic systems
ISO 14132-1, Optics and optical instruments — Vocabulary for telescopic systems — Part 1: General terms
and alphabetical indexes of terms in ISO 14132
ISO 14132-2, Optics and optical instruments — Vocabulary for telescopic systems — Part 2: Terms for
binoculars, monoculars and spotting scopes
ISO 14490-1, Optics and optical instruments — Test methods for telescopic systems — Part 1: Test methods
for basic characteristics
ISO 14490-2, Optics and optical instruments — Test methods for telescopic systems — Part 2: Test methods
for binocular systems
ISO 14490-7, Optics and optical instruments — Test methods for telescopic systems — Part 7: Test methods
for limit of resolution
3 Terms and definitions
For the purposes of this document, the general terms, definitions and symbols given in ISO 14132-1 apply and
particular terms and definitions for binoculars, monoculars and spotting scopes given in ISO 14132-2 apply.
© ISO 2006 – All rights reserved 1

---------------------- Page: 4 ----------------------
ISO 14133-2:2006(E)
4 Specifications
Fundamental requirements are defined by minimum values or tolera
...