ISO/IEC 30118-6:2018

Information technology — Open Connectivity Foundation (OCF) Specification — Part 6: Resource to AllJoyn interface mapping specification

The OCF Resource to AllJoyn Interface Mapping specification ("this specification") provides detailed mapping information to provide equivalency between AllJoyn defined Interfaces and OCF defined Resources, This specification provides mapping for Device Types (AllJoyn to/from OCF), identifies equivalent OCF Resources for both mandatory and optional AllJoyn interfaces and for each interface defines the detailed Property by Property mapping using OCF defined extensions to JSON schema to programmatically define the mappings.

Technologies de l'information — Spécification de la Fondation pour la connectivité ouverte (Fondation OCF) — Partie 6: Spécification du mapping entre les ressources et l'interface AllJoyn

General Information

• Status: Withdrawn
• Publication Date: 18-Nov-2018
• Withdrawal Date: 18-Nov-2018
• ICS: 35.200 - Interface and interconnection equipment
• Technical Committee: ISO/IEC JTC 1 - Information technology
• Drafting Committee: ISO/IEC JTC 1 - Information technology
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 18-Oct-2021

Relations

• Revised: ISO/IEC 30118-6:2021 - Information technology — Open Connectivity Foundation (OCF) Specification — Part 6: Resource to AllJoyn interface mapping specification
• Effective Date: 18-Apr-2021

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 30118-6
First edition
2018-11
Information technology — Open
Connectivity Foundation (OCF)
Specification —
Part 6:
Resource to AllJoyn interface mapping
specification
Technologies de l'information — Spécification de la Fondation pour la
connectivité ouverte (Fondation OCF) —
Partie 6: Spécification du mapping entre les ressources et
l'interface AllJoyn
Reference number
ISO/IEC 30118-6:2018(E)
©
ISO/IEC 2018

---------------------- Page: 1 ----------------------
ISO/IEC 30118-6:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO/IEC 2018 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 30118-6:2018(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical activity.
ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non‐governmental, in liaison with ISO and IEC, also take part in the
work. In the field of information technology, ISO and IEC have established a joint technical committee,
ISO/IEC JTC 1.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of document should be noted (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
Details of any patent rights identified during the development of the document will be in the
Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the World
Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT),
see www.iso.org/iso/foreword.html.
This document was prepared by the Open Connectivity Foundation (OCF) (as the OCF Resource to
AllJoyn Interface Mapping, Version 1.0.0) and drafted in accordance with its editorial rules. It was
adopted, under the JTC 1 PAS procedure, by Joint Technical Committee ISO/IEC JTC 1, Information
technology.
A list of all parts in the ISO/IEC 30118 series can be found on the ISO websitete.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
© ISO/IEC 2018 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/IEC 30118-6:2018(E)

CONTENTS

1 Scope . 10
2 Normative references . 10
3 Terms, definitions symbols and abbreviations . 11
3.1 Terms and definitions . 11
3.2 Symbols and abbreviations . 11
3.3 Conventions . 11
4 Document conventions and organization . 11
4.1 Notation . 11
4.2 Data types . 12
5 Theory of Operation . 12
5.1 Interworking Approach . 12
5.2 Mapping Syntax . 12
5.2.1 General . 12
5.2.2 Value Assignment . 12
5.2.3 Property Naming . 12
5.2.4 Arrays . 12
5.2.5 Default Mapping . 13
5.2.6 Conditional Mapping . 13
5.2.7 Loops . 13
5.2.8 Method Invocation . 13
6 Device Type Mapping . 13
6.1 Introduction . 13
6.2 AllJoyn Device Types to OCF Device Types . 13
6.3 OCF Device Types with no AllJoyn Equivalent . 15
7 Resource to Interface Equivalence . 16
7.1 Introduction . 16
7.2 AllJoyn Interfaces to OCF Resources . 16
8 Detailed Mapping APIs . 18
8.1 Air Quality Mapping . 19
8.1.1 Introduction . 19
8.1.2 Example URI . 20
8.1.3 Resource Type . 20
8.1.4 RAML Definition . 20
8.1.5 Property Definition . 22
8.1.6 CRUDN behavior . 22
8.2 Air Quality Level Mapping . 22
8.2.1 Introduction . 22
8.2.2 Example URI . 22
8.2.3 Resource Type . 22
 2

© ISO/IEC 2018 – All rights reserved

---------------------- Page: 4 ----------------------
ISO/IEC 30118-6:2018(E)
8.2.4 RAML Definition . 22
8.2.5 Property Definition . 24
8.2.6 CRUDN behavior . 25
8.3 Current Humidity Mapping . 25
8.3.1 Introduction . 25
8.3.2 Example URI . 25
8.3.3 Resource Type . 25
8.3.4 RAML Definition . 25
8.3.5 Property Definition . 27
8.3.6 CRUDN behavior . 27
8.4 Current Temperature Mapping . 27
8.4.1 Introduction . 27
8.4.2 Example URI . 27
8.4.3 Resource Type . 27
8.4.4 RAML Definition . 27
8.4.5 Property Definition . 29
8.4.6 CRUDN behavior . 29
8.5 Target Humidity Mapping . 29
8.5.1 Introduction . 29
8.5.2 Example URI . 29
8.5.3 Resource Type . 29
8.5.4 RAML Definition . 29
8.5.5 Property Definition . 34
8.5.6 CRUDN behavior . 35
8.6 Target Temperature Mapping . 35
8.6.1 Introduction . 35
8.6.2 Example URI . 35
8.6.3 Resource Type . 35
8.6.4 RAML Definition . 35
8.6.5 Property Definition . 40
8.6.6 CRUDN behavior . 40
8.7 Audio Volume Mapping . 40
8.7.1 Introduction . 40
8.7.2 Example URI . 40
8.7.3 Resource Type . 40
8.7.4 RAML Definition . 40
8.7.5 Property Definition . 44
8.7.6 CRUDN behavior . 44
8.8 Climate Control Mode Mapping . 44
8.8.1 Introduction . 44
8.8.2 Example URI . 44
8.8.3 Resource Type . 44
8.8.4 RAML Definition . 44
8.8.5 Property Definition . 48
 3

© ISO/IEC 2018 – All rights reserved

---------------------- Page: 5 ----------------------
ISO/IEC 30118-6:2018(E)
8.8.6 CRUDN behavior . 49
8.9 Closed Status Mapping . 49
8.9.1 Introduction . 49
8.9.2 Example URI . 49
8.9.3 Resource Type . 49
8.9.4 RAML Definition . 49
8.9.5 Property Definition . 50
8.9.6 CRUDN behavior . 50
8.10 Cycle Control Mapping . 50
8.10.1 Introduction . 50
8.10.2 Example URI . 50
8.10.3 Resource Type . 50
8.10.4 RAML Definition . 50
8.10.5 Property Definition . 52
8.10.6 CRUDN behavior . 52
8.11 Fan Speed Level Mapping . 52
8.11.1 Introduction . 52
8.11.2 Example URI . 52
8.11.3 Resource Type . 53
8.11.4 RAML Definition . 53
8.11.5 Property Definition . 56
8.11.6 CRUDN behavior . 56
8.12 Heating Zone Mapping. 56
8.12.1 Introduction . 56
8.12.2 Example URI . 57
8.12.3 Resource Type . 57
8.12.4 RAML Definition . 57
8.12.5 Property Definition . 58
8.12.6 CRUDN behavior . 59
8.13 HVAC Fan Mode Mapping . 59
8.13.1 Introduction . 59
8.13.2 Example URI . 59
8.13.3 Resource Type . 59
8.13.4 RAML Definition . 59
8.13.5 Property Definition . 62
8.13.6 CRUDN behavior . 62
8.14 On Off Mapping . 63
8.14.1 Introduction . 63
8.14.2 Example URI . 63
8.14.3 Resource Type . 63
8.14.4 RAML Definition . 63
8.14.5 Property Definition . 67
8.14.6 CRUDN behavior . 67
8.15 Oven Cycle Phase Mapping . 67
 4

© ISO/IEC 2018 – All rights reserved

---------------------- Page: 6 ----------------------
ISO/IEC 30118-6:2018(E)
8.15.1 Introduction . 67
8.15.2 Example URI . 67
8.15.3 Resource Type . 67
8.15.4 RAML Definition . 67
8.15.5 Property Definition . 69
8.15.6 CRUDN behavior . 69
Annex A Swagger2.0 (Informative) . 70
A.1 Audio Volume Mapping . 70
A.1.1 Introduction . 70
A.1.2 Example URI . 70
A.1.3 Resource Type . 70
A.1.4 Swagger2.0 Definition . 70
A.1.5 Property Definition . 72
A.1.6 CRUDN behavior . 73
A.2 Climate Control Mode Mapping . 73
A.2.1 Introduction . 73
A.2.2 Example URI . 73
A.2.3 Resource Type . 73
A.2.4 Swagger2.0 Definition . 73
A.2.5 Property Definition . 76
A.2.6 CRUDN behavior . 76
A.3 Closed Status Mapping . 77
A.3.1 Introduction . 77
A.3.2 Example URI . 77
A.3.3 Resource Type . 77
A.3.4 Swagger2.0 Definition . 77
A.3.5 Property Definition . 78
A.3.6 CRUDN behavior . 78
A.4 Air Quality Mapping . 78
A.4.1 Introduction . 78
A.4.2 Example URI . 79
A.4.3 Resource Type . 79
A.4.4 Swagger2.0 Definition . 79
A.4.5 Property Definition . 81
A.4.6 CRUDN behavior . 81
A.5 Air Quality Level Mapping . 81
A.5.1 Introduction . 81
A.5.2 Example URI . 82
A.5.3 Resource Type . 82
A.5.4 Swagger2.0 Definition . 82
A.5.5 Property Definition . 84
A.5.6 CRUDN behavior . 85
A.6 Current Humidity Mapping . 85
A.6.1 Introduction . 85
 5

© ISO/IEC 2018 – All rights reserved

---------------------- Page: 7 ----------------------
ISO/IEC 30118-6:2018(E)
A.6.2 Example URI . 85
A.6.3 Resource Type . 85
A.6.4 Swagger2.0 Definition . 85
A.6.5 Property Definition . 86
A.6.6 CRUDN behavior . 87
A.7 Current Temperature Mapping . 87
A.7.1 Introduction . 87
A.7.2 Example URI . 87
A.7.3 Resource Type . 87
A.7.4 Swagger2.0 Definition . 87
A.7.5 Property Definition . 89
A.7.6 CRUDN behavior . 89
A.8 Cycle Control Mapping . 89
A.8.1 Introduction . 89
A.8.2 Example URI . 89
A.8.3 Resource Type . 90
A.8.4 Swagger2.0 Definition . 90
A.8.5 Property Definition . 91
A.8.6 CRUDN behavior . 92
A.9 Fan Speed Level Mapping . 92
A.9.1 Introduction . 92
A.9.2 Example URI . 92
A.9.3 Resource Type . 92
A.9.4 Swagger2.0 Definition . 92
A.9.5 Property Definition . 95
A.9.6 CRUDN behavior . 95
A.10 Heating Zone Mapping. 95
A.10.1 Introduction . 95
A.10.2 Example URI . 96
A.10.3 Resource Type . 96
A.10.4 Swagger2.0 Definition . 96
A.10.5 Property Definition . 97
A.10.6 CRUDN behavior . 98
A.11 HVAC Fan Mode Mapping . 98
A.11.1 Introduction . 98
A.11.2 Example URI . 98
A.11.3 Resource Type . 98
A.11.4 Swagger2.0 Definition . 98
A.11.5 Property Definition . 101
A.11.6 CRUDN behavior . 101
A.12 On Off Mapping . 101
A.12.1 Introduction . 101
A.12.2 Example URI .
...