ISO 3772:2000
(Main)Photography — Rolls of sensitized material for the pre-press industry — Dimensions and related requirements
Photography — Rolls of sensitized material for the pre-press industry — Dimensions and related requirements
This International Standard specifies the dimensions of sensitized materials, cores and disposable cassettes, and describes package marking for sensitized materials, including those for electronic scanners or image-setting devices and those materials supplied in disposable cassettes. It is applicable to photographic sensitized materials in rolls for use in the pre-press industry.
Photographie — Rouleaux de matériau sensible pour l'industrie de préimpression — Dimensions et exigences connexes
General Information
Relations
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 3772
Third edition
2000-10-15
Photography — Rolls of sensitized material
for the pre-press industry — Dimensions
and related requirements
Photographie — Rouleaux de matériau sensible pour l'industrie de
préimpression — Dimensions et exigences connexes
Reference number
ISO 3772:2000(E)
©
ISO 2000
---------------------- Page: 1 ----------------------
ISO 3772:2000(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2000
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 2000 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 3772:2000(E)
Contents Page
Foreword.iv
1 Scope .1
2 Normative references .1
3 Term and definition .1
4 Conditions for measurement of dimensions .1
5 Dimensions.2
5.1 Width of rolls.2
5.2 Length of rolls.2
5.3 Core internal diameter.2
5.4 Core length.2
5.5 Dimensions of disposable cassettes.2
6 Splices .5
7 Winding configuration.5
8 Disposable cassette pull-out force .5
9 Package marking .5
10 Compliance.6
Annex A (informative) Dimensional stability .7
Bibliography.8
© ISO 2000 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO 3772:2000(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 3772 was prepared by Technical Committee ISO/TC 42, Photography.
This third edition of ISO 3772 cancels and replaces the second edition (ISO 3772:1991), and ISO 6407:1992,
Photography — Film dimensions — Graphic arts; ISO 6408:1991, Photography — Paper dimensions — Rolls for
photocomposition; and ISO 11313:1994, Photography — Disposable cassettes containing photocomposition film
and paper — Dimensions and related requirements. These have been combined and revised, featuring a new
emphasis on general cutting rules as opposed to listing all known sizes specifically.
The combination of these International Standards into a single International Standard results in a tightening of
specified tolerances for certain sizes and applications.
This International Standard replaces a number of standards relating to rolls of sensitized material for the pre-press
industry. It features a simplified set of rules for dimensioning new sizes. It is hoped that the use of this International
Standard will promote the compatibility of sensitized material and equipment.
Annex A of this International Standard is for information only.
iv © ISO 2000 – All rights reserved
---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 3772:2000(E)
Photography — Rolls of sensitized material for the pre-press
industry — Dimensions and related requirements
1 Scope
This International Standard specifies the dimensions of sensitized materials, cores and disposable cassettes, and
describes package marking for sensitized materials, including those for electronic scanners or image-setting
devices and those materials supplied in disposable cassettes.
It is applicable to photographic sensitized materials in rolls for use in the pre-press industry.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of
this International Standard. For dated references, subsequent amendments to, or revisions of, any of these
publications do not apply. However, parties to agreements based on this International Standard are encouraged
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.