ISO 5758:2002
(Main)Cinematography — Labelling of containers for motion-picture film and magnetic material — Minimum information for exchange of materials
Cinematography — Labelling of containers for motion-picture film and magnetic material — Minimum information for exchange of materials
ISO 5758:2002 specifies the information to be included on the label and/or accompanying documents, for identifying the contents of containers for processed motion-picture film and magnetic sound records. It specifies the minimum information necessary for the exchange of materials. NOTE It does not apply to the labelling of containers of unexposed motion-picture films and magnetic materials specified in ISO 3042.
Cinématographie — Étiquetage des conteneurs pour films cinématographiques et bandes magnétiques — Informations minimales pour les échanges de produits
General Information
Relations
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 5758
Second edition
2002-08-01
Cinematography — Labelling of containers
for motion-picture film and magnetic
material — Minimum information for
exchange of materials
Cinématographie — Étiquetage des conteneurs pour films
cinématographiques et bandes magnétiques — Informations minimales
pour les échanges de produits
Reference number
ISO 5758:2002(E)
©
ISO 2002
---------------------- Page: 1 ----------------------
ISO 5758:2002(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2002
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 2002 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 5758:2002(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted
by the technical committees are circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 5758 was prepared by Technical Committee ISO/TC 36, Cinematography.
This second edition cancels and replaces the first edition (ISO 5758:1987), which has been technically revised.
© ISO 2002 – All rights reserved iii
---------------------- Page: 3 ----------------------
INTERNATIONAL STANDARD ISO 5758:2002(E)
Cinematography — Labelling of containers for motion-picture film
and magnetic material — Minimum information for exchange of
materials
1 Scope
This International Standard specifies the information to be included on the label and/or accompanying documents,
for identifying the contents of containers for processed motion-picture film and magnetic sound records. It specifies
the minimum information necessary for the exchange of materials
NOTE It does not apply to the labelling of containers of unexposed motion-picture films and magnetic materials specified in
ISO 3042.
2 Normative reference
The following normative document contains provisions which, through reference in this text, constitute provisions of
this International Standard. For dated references, subsequent amendments to, or revisions of, any of these
publications do not apply. However, parties to agreements based on this International Standard are encouraged to
investigate the possibility of applying the most recent edition of the normative document indicated below. For
undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC
maintain registers of currently valid International Standards.
ISO 3640:1982, Cinematography — Motion-picture prints and sound records for international exchange of
television programmes — Specifications
3 Labe
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.