Fireworks — Test methods for determination of specific chemical substances — Part 11: Phosphorus content by inductively coupled plasma optical emission spectrometry (ICP-OES)

This document specifies the test method for the determination of phosphorus content in firework compositions by inductively coupled plasma optical emission spectrometry (ICP-AES). Such test is applied to fireworks excluding Christmas crackers, party poppers, or snaps according to ISO 25947-5. The use of white phosphorus can lead to fireworks of hazardous chemical stability that can be detected by possible self-ignition during the thermal conditioning test according to ISO 25947-4:2017, 6.16 (75,0 ± 2,5 °C for 48 h).

Artifices de divertissement — Méthodes d'essai pour la détermination de substances chimiques spécifiques — Partie 11: Détermination de la teneur en phosphore par spectrométrie d'émission optique à plasma à couplage inductif (ICP-OES)

General Information

Status
Published
Publication Date
12-Jul-2022
Technical Committee
Current Stage
6060 - International Standard published
Start Date
13-Jul-2022
Due Date
16-Jan-2022
Completion Date
13-Jul-2022
Ref Project

Buy Standard

Standard
ISO 22863-11:2022 - Fireworks — Test methods for determination of specific chemical substances — Part 11: Phosphorus content by inductively coupled plasma optical emission spectrometry (ICP-OES) Released:13. 07. 2022
English language
6 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 22863-11
First edition
2022-07
Fireworks — Test methods for
determination of specific chemical
substances —
Part 11:
Phosphorus content by inductively
coupled plasma optical emission
spectrometry (ICP-OES)
Partie 11: Titre manque
Reference number
ISO 22863-11:2022(E)
© ISO 2022

---------------------- Page: 1 ----------------------
ISO 22863-11:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2022 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 22863-11:2022(E)
Contents Page
Foreword .iv
1 S c op e . 1
2 Nor m at i ve r ef er enc e s . 1
3 T erms and definitions . 1
4 P rinciple . 1
5 R e a g ent s . 1
6 A pp a r at u s . 2
7 P rep a r at ion s . 3
8 P r o c e du re .3
8 .1 S a mple s i z e . 3
8.2 N itrification process . 3
8. 3 Bl ank t e st . 3
8 .4 C a l ibr at ion c u r ve . 3
8 . 5 S a mple de t er m i n at ion. 3
8 . 6 P a r a l lel t e s t . 4
9 Re sults calculation. 4
10 P r e c i s ion . 4
11 Detection limit . 4
12 Te s t r ep or t . 4
Bibliography . 6
iii
© ISO 2022 – All rights reserved

---------------------- Page: 3 ----------------------
ISO 22863-11:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 264, Fireworks.
A list of all the parts in the ISO 22863 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
  © ISO 2022 – All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 22863-11:2022(E)
Fireworks — Test methods for determination of specific
chemical substances —
Part 11:
Phosphorus content by inductively coupled plasma optical
emission spectrometry (ICP-OES)
1 S cope
This document specifies the test method for the determination of phosphorus content in firework
compositions by inductively coupled plasma optical emission spectrometry (ICP-AES).
Such test is applied to fireworks excluding Christmas crackers, party poppers, or snaps according to
ISO 25947-5. The use of white phosphorus can lead to fireworks of hazardous chemical stability that can
be detected by possible self-ignition during the thermal conditioning test according to ISO 25947-4:2017,
6.16 (75,0 ± 2,5 °C for 48 h).
2 Normat ive references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 22863-1:2020, Fireworks — Test methods for determination of specific chemical substances — Part 1:
General
3 T erms and definitions
No terms and defini
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.