Textiles — Water resistance — Rain tests: exposure to a horizontal water spray

This document specifies a test for measuring the resistance of fabrics to the penetration of water by impact. It can be used to predict the probable rain penetration resistance of textile fabrics. This document is applicable to any textile fabric, whether or not it has been given a water-resistant or water-repellent finish. It is especially suitable for measuring apparel fabrics. Testing at different intensities of water impact gives a complete picture of the penetration resistance of a single fabric or combination of fabrics. The test is particularly suitable when measuring highly water-resistant fabrics with low amounts of water penetration.

Textiles — Résistance à l'eau — Essai d'arrosage: exposition à une pulvérisation horizontale

General Information

Status
Published
Publication Date
09-Aug-2021
Current Stage
6060 - International Standard published
Start Date
10-Aug-2021
Completion Date
10-Aug-2021
Ref Project

RELATIONS

Buy Standard

Standard
ISO 22958:2021 - Textiles -- Water resistance -- Rain tests: exposure to a horizontal water spray
English language
7 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
ISO/FDIS 22958:Version 08-maj-2021 - Textiles -- Water resistance -- Rain tests: exposure to a horizontal water spray
English language
7 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (sample)

INTERNATIONAL ISO
STANDARD 22958
Second edition
2021-08
Textiles — Water resistance — Rain
tests: exposure to a horizontal water
spray
Textiles — Résistance à l'eau — Essai d'arrosage: exposition à une
pulvérisation horizontale
Reference number
ISO 22958:2021(E)
ISO 2021
---------------------- Page: 1 ----------------------
ISO 22958:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 22958:2021(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

Introduction ..................................................................................................................................................................................................................................v

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Principle ........................................................................................................................................................................................................................ 1

5 Safety precautions .............................................................................................................................................................................................. 1

6 Apparatus ..................................................................................................................................................................................................................... 2

7 Test specimens........................................................................................................................................................................................................ 5

8 Procedure..................................................................................................................................................................................................................... 6

9 Evaluation .................................................................................................................................................................................................................... 6

10 Test report ................................................................................................................................................................................................................... 6

Bibliography ................................................................................................................................................................................................................................ 7

© ISO 2021 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO 22958:2021(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT),see www .iso .org/

iso/ foreword .html.

This document was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 2, Cleansing,

finishing and water resistance tests.

This second edition cancels and replaces the first edition (ISO 22958:2005), which has been technically

revised. It also incorporates the Technical Corrigendum ISO 22958:2005/Cor 1:2009.

The main changes compared to the previous edition are as follows:

— Figure 2 b) has been revised to more accurately reflect the relative dimensions of the square

specimen;
— editorial changes have been applied throughout for clarity.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2021 – All rights reserved
---------------------- Page: 4 ----------------------
ISO 22958:2021(E)
Introduction

ISO 9865 is not always accurate when measuring water resistance (penetration) when testing the latest

tightly woven or lightly coated fabrics in the market today. The rain test specified in this document is

more suitable for measuring relatively low amounts of water penetrating highly water-resistant fabric.

© ISO 2021 – All rights reserved v
---------------------- Page: 5 ----------------------
INTERNATIONAL STANDARD ISO 22958:2021(E)
Textiles — Water resistance — Rain tests: exposure to a
horizontal water spray
1 Scope

This document specifies a test for measuring the resistance of fabrics to the penetration of water by

impact. It can be used to predict the probable rain penetration resistance of textile fabrics.

This document is applicable to any textile fabric, whether or not it has been given a water-resistant

or water-repellent finish. It is especially suitable for measuring apparel fabrics. Testing at different

...

FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 22958
ISO/TC 38/SC 2
Textiles — Water resistance — Rain
Secretariat: SAC
tests: exposure to a horizontal water
Voting begins on:
2021­05­10 spray
Voting terminates on:
Textiles — Résistance à l'eau — Essai d'arrosage: exposition à une
2021­07­05
pulvérisation horizontale
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/FDIS 22958:2021(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN­
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. ISO 2021
---------------------- Page: 1 ----------------------
ISO/FDIS 22958:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH­1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/FDIS 22958:2021(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

Introduction ..................................................................................................................................................................................................................................v

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Principle ........................................................................................................................................................................................................................ 1

5 Safety precautions .............................................................................................................................................................................................. 1

6 Apparatus ..................................................................................................................................................................................................................... 2

7 Test specimens........................................................................................................................................................................................................ 5

8 Procedure..................................................................................................................................................................................................................... 5

9 Evaluation .................................................................................................................................................................................................................... 5

10 Test report ................................................................................................................................................................................................................... 5

Bibliography ................................................................................................................................................................................................................................ 7

© ISO 2021 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/FDIS 22958:2021(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non­governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT),see www .iso .org/

iso/ foreword .html.

This document was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 2, Cleansing,

finishing and water resistance tests.

This second edition cancels and replaces the first edition (ISO 22958:2005), which has been technically

revised. It also incorporates the Technical Corrigendum ISO 22958:2005/Cor 1:2009.

The main changes compared to the previous edition are as follows:

— Figure 2 b) has been revised to more accurately reflect the relative dimensions of the square

specimen;
— editorial changes have been applied throughout for clarity.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2021 – All rights reserved
---------------------- Page: 4 ----------------------
ISO/FDIS 22958:2021(E)
Introduction

ISO 9865 is not always accurate when measuring water resistance (penetration) when testing the latest

tightly woven or lightly coated fabrics in the market today. The rain test specified in this document is

more suitable for measuring relatively low amounts of water penetrating highly water- resistant fabric.

© ISO 2021 – All rights reserved v
---------------------- Page: 5 ----------------------
FINAL DRAFT INTERNATIONAL STANDARD ISO/FDIS 22958:2021(E)
Textiles — Water resistance — Rain tests: exposure to a
horizontal water spray
1 Scope

This document specifies a test for measuring the resistance of fabrics to the penetration of water by

impact. It can be used
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.